2020/05/21 - Synthetics - 4 updated api methods
Changes AWS CloudWatch Synthetics now supports configuration of allocated memory for a canary.
{'RunConfig': {'MemoryInMB': 'integer'}}
Response {'Canary': {'RunConfig': {'MemoryInMB': 'integer'}}}
Creates a canary. Canaries are scripts that monitor your endpoints and APIs from the outside-in. Canaries help you check the availability and latency of your web services and troubleshoot anomalies by investigating load time data, screenshots of the UI, logs, and metrics. You can set up a canary to run continuously or just once.
Do not use CreateCanary to modify an existing canary. Use UpdateCanary instead.
To create canaries, you must have the CloudWatchSyntheticsFullAccess policy. If you are creating a new IAM role for the canary, you also need the the iam:CreateRole , iam:CreatePolicy and iam:AttachRolePolicy permissions. For more information, see Necessary Roles and Permissions.
Do not include secrets or proprietary information in your canary names. The canary name makes up part of the Amazon Resource Name (ARN) for the canary, and the ARN is included in outbound calls over the internet. For more information, see Security Considerations for Synthetics Canaries.
See also: AWS API Documentation
Request Syntax
client.create_canary(
Name='string',
Code={
'S3Bucket': 'string',
'S3Key': 'string',
'S3Version': 'string',
'ZipFile': b'bytes',
'Handler': 'string'
},
ArtifactS3Location='string',
ExecutionRoleArn='string',
Schedule={
'Expression': 'string',
'DurationInSeconds': 123
},
RunConfig={
'TimeoutInSeconds': 123,
'MemoryInMB': 123
},
SuccessRetentionPeriodInDays=123,
FailureRetentionPeriodInDays=123,
RuntimeVersion='string',
VpcConfig={
'SubnetIds': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
Tags={
'string': 'string'
}
)
string
[REQUIRED]
The name for this canary. Be sure to give it a descriptive name that distinguishes it from other canaries in your account.
Do not include secrets or proprietary information in your canary names. The canary name makes up part of the canary ARN, and the ARN is included in outbound calls over the internet. For more information, see Security Considerations for Synthetics Canaries.
dict
[REQUIRED]
A structure that includes the entry point from which the canary should start running your script. If the script is stored in an S3 bucket, the bucket name, key, and version are also included.
S3Bucket (string) --
If your canary script is located in S3, specify the full bucket name here. The bucket must already exist. Specify the full bucket name, including s3:// as the start of the bucket name.
S3Key (string) --
The S3 key of your script. For more information, see Working with Amazon S3 Objects.
S3Version (string) --
The S3 version ID of your script.
ZipFile (bytes) --
If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the .zip file that contains the script. It can be up to 5 MB.
Handler (string) -- [REQUIRED]
The entry point to use for the source code when running the canary. This value must end with the string .handler .
string
[REQUIRED]
The location in Amazon S3 where Synthetics stores artifacts from the test runs of this canary. Artifacts include the log file, screenshots, and HAR files.
string
[REQUIRED]
The ARN of the IAM role to be used to run the canary. This role must already exist, and must include lambda.amazonaws.com as a principal in the trust policy. The role must also have the following permissions:
s3:PutObject
s3:GetBucketLocation
s3:ListAllMyBuckets
cloudwatch:PutMetricData
logs:CreateLogGroup
logs:CreateLogStream
logs:CreateLogStream
dict
[REQUIRED]
A structure that contains information about how often the canary is to run and when these test runs are to stop.
Expression (string) -- [REQUIRED]
A rate expression that defines how often the canary is to run. The syntax is rate(number unit) . unit can be minute , minutes , or hour .
For example, rate(1 minute) runs the canary once a minute, rate(10 minutes) runs it once every 10 minutes, and rate(1 hour) runs it once every hour. You can specify a frequency between rate(1 minute) and rate(1 hour) .
Specifying rate(0 minute) or rate(0 hour) is a special value that causes the canary to run only once when it is started.
DurationInSeconds (integer) --
How long, in seconds, for the canary to continue making regular runs according to the schedule in the Expression value. If you specify 0, the canary continues making runs until you stop it. If you omit this field, the default of 0 is used.
dict
A structure that contains the configuration for individual canary runs, such as timeout value.
TimeoutInSeconds (integer) -- [REQUIRED]
How long the canary is allowed to run before it must stop. If you omit this field, the frequency of the canary is used as this value, up to a maximum of 14 minutes.
MemoryInMB (integer) --
The maximum amount of memory available to the canary while it is running, in MB. The value you specify must be a multiple of 64.
integer
The number of days to retain data about successful runs of this canary. If you omit this field, the default of 31 days is used. The valid range is 1 to 455 days.
integer
The number of days to retain data about failed runs of this canary. If you omit this field, the default of 31 days is used. The valid range is 1 to 455 days.
string
[REQUIRED]
Specifies the runtime version to use for the canary. Currently, the only valid value is syn-1.0 . For more information about runtime versions, see Canary Runtime Versions.
dict
If this canary is to test an endpoint in a VPC, this structure contains information about the subnet and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
SubnetIds (list) --
The IDs of the subnets where this canary is to run.
(string) --
SecurityGroupIds (list) --
The IDs of the security groups for this canary.
(string) --
dict
A list of key-value pairs to associate with the canary. You can associate as many as 50 tags with a canary.
Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by granting a user permission to access or change only the resources that have certain tag values.
(string) --
(string) --
dict
Response Syntax
{
'Canary': {
'Id': 'string',
'Name': 'string',
'Code': {
'SourceLocationArn': 'string',
'Handler': 'string'
},
'ExecutionRoleArn': 'string',
'Schedule': {
'Expression': 'string',
'DurationInSeconds': 123
},
'RunConfig': {
'TimeoutInSeconds': 123,
'MemoryInMB': 123
},
'SuccessRetentionPeriodInDays': 123,
'FailureRetentionPeriodInDays': 123,
'Status': {
'State': 'CREATING'|'READY'|'STARTING'|'RUNNING'|'UPDATING'|'STOPPING'|'STOPPED'|'ERROR'|'DELETING',
'StateReason': 'string',
'StateReasonCode': 'INVALID_PERMISSIONS'
},
'Timeline': {
'Created': datetime(2015, 1, 1),
'LastModified': datetime(2015, 1, 1),
'LastStarted': datetime(2015, 1, 1),
'LastStopped': datetime(2015, 1, 1)
},
'ArtifactS3Location': 'string',
'EngineArn': 'string',
'RuntimeVersion': 'string',
'VpcConfig': {
'VpcId': 'string',
'SubnetIds': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'Tags': {
'string': 'string'
}
}
}
Response Structure
(dict) --
Canary (dict) --
The full details about the canary you have created.
Id (string) --
The unique ID of this canary.
Name (string) --
The name of the canary.
Code (dict) --
This structure contains information about the canary's Lambda handler and where its code is stored by CloudWatch Synthetics.
SourceLocationArn (string) --
The ARN of the Lambda layer where Synthetics stores the canary script code.
Handler (string) --
The entry point to use for the source code when running the canary.
ExecutionRoleArn (string) --
The ARN of the IAM role used to run the canary. This role must include lambda.amazonaws.com as a principal in the trust policy.
Schedule (dict) --
A structure that contains information about how often the canary is to run, and when these runs are to stop.
Expression (string) --
A rate expression that defines how often the canary is to run. The syntax is rate(number unit) . unit can be minute , minutes , or hour .
For example, rate(1 minute) runs the canary once a minute, rate(10 minutes) runs it once every 10 minutes, and rate(1 hour) runs it once every hour.
Specifying rate(0 minute) or rate(0 hour) is a special value that causes the canary to run only once when it is started.
DurationInSeconds (integer) --
How long, in seconds, for the canary to continue making regular runs after it was created. The runs are performed according to the schedule in the Expression value.
RunConfig (dict) --
A structure that contains information for a canary run.
TimeoutInSeconds (integer) --
How long the canary is allowed to run before it must stop.
MemoryInMB (integer) --
The maximum amount of memory available to the canary while it is running, in MB. The value you must be a multiple of 64.
SuccessRetentionPeriodInDays (integer) --
The number of days to retain data about successful runs of this canary.
FailureRetentionPeriodInDays (integer) --
The number of days to retain data about failed runs of this canary.
Status (dict) --
A structure that contains information about the canary's status.
State (string) --
The current state of the canary.
StateReason (string) --
If the canary has insufficient permissions to run, this field provides more details.
StateReasonCode (string) --
If the canary cannot run or has failed, this field displays the reason.
Timeline (dict) --
A structure that contains information about when the canary was created, modified, and most recently run.
Created (datetime) --
The date and time the canary was created.
LastModified (datetime) --
The date and time the canary was most recently modified.
LastStarted (datetime) --
The date and time that the canary's most recent run started.
LastStopped (datetime) --
The date and time that the canary's most recent run ended.
ArtifactS3Location (string) --
The location in Amazon S3 where Synthetics stores artifacts from the runs of this canary. Artifacts include the log file, screenshots, and HAR files.
EngineArn (string) --
The ARN of the Lambda function that is used as your canary's engine. For more information about Lambda ARN format, see Resources and Conditions for Lambda Actions.
RuntimeVersion (string) --
Specifies the runtime version to use for the canary. Currently, the only valid value is syn-1.0 . For more information about runtime versions, see Canary Runtime Versions.
VpcConfig (dict) --
If this canary is to test an endpoint in a VPC, this structure contains information about the subnets and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
VpcId (string) --
The IDs of the VPC where this canary is to run.
SubnetIds (list) --
The IDs of the subnets where this canary is to run.
(string) --
SecurityGroupIds (list) --
The IDs of the security groups for this canary.
(string) --
Tags (dict) --
The list of key-value pairs that are associated with the canary.
(string) --
(string) --
{'Canaries': {'RunConfig': {'MemoryInMB': 'integer'}}}
This operation returns a list of the canaries in your account, along with full details about each canary.
This operation does not have resource-level authorization, so if a user is able to use DescribeCanaries , the user can see all of the canaries in the account. A deny policy can only be used to restrict access to all canaries. It cannot be used on specific resources.
See also: AWS API Documentation
Request Syntax
client.describe_canaries(
NextToken='string',
MaxResults=123
)
string
A token that indicates that there is more data available. You can use this token in a subsequent operation to retrieve the next set of results.
integer
Specify this parameter to limit how many canaries are returned each time you use the DescribeCanaries operation. If you omit this parameter, the default of 100 is used.
dict
Response Syntax
{
'Canaries': [
{
'Id': 'string',
'Name': 'string',
'Code': {
'SourceLocationArn': 'string',
'Handler': 'string'
},
'ExecutionRoleArn': 'string',
'Schedule': {
'Expression': 'string',
'DurationInSeconds': 123
},
'RunConfig': {
'TimeoutInSeconds': 123,
'MemoryInMB': 123
},
'SuccessRetentionPeriodInDays': 123,
'FailureRetentionPeriodInDays': 123,
'Status': {
'State': 'CREATING'|'READY'|'STARTING'|'RUNNING'|'UPDATING'|'STOPPING'|'STOPPED'|'ERROR'|'DELETING',
'StateReason': 'string',
'StateReasonCode': 'INVALID_PERMISSIONS'
},
'Timeline': {
'Created': datetime(2015, 1, 1),
'LastModified': datetime(2015, 1, 1),
'LastStarted': datetime(2015, 1, 1),
'LastStopped': datetime(2015, 1, 1)
},
'ArtifactS3Location': 'string',
'EngineArn': 'string',
'RuntimeVersion': 'string',
'VpcConfig': {
'VpcId': 'string',
'SubnetIds': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'Tags': {
'string': 'string'
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Canaries (list) --
Returns an array. Each item in the array contains the full information about one canary.
(dict) --
This structure contains all information about one canary in your account.
Id (string) --
The unique ID of this canary.
Name (string) --
The name of the canary.
Code (dict) --
This structure contains information about the canary's Lambda handler and where its code is stored by CloudWatch Synthetics.
SourceLocationArn (string) --
The ARN of the Lambda layer where Synthetics stores the canary script code.
Handler (string) --
The entry point to use for the source code when running the canary.
ExecutionRoleArn (string) --
The ARN of the IAM role used to run the canary. This role must include lambda.amazonaws.com as a principal in the trust policy.
Schedule (dict) --
A structure that contains information about how often the canary is to run, and when these runs are to stop.
Expression (string) --
A rate expression that defines how often the canary is to run. The syntax is rate(number unit) . unit can be minute , minutes , or hour .
For example, rate(1 minute) runs the canary once a minute, rate(10 minutes) runs it once every 10 minutes, and rate(1 hour) runs it once every hour.
Specifying rate(0 minute) or rate(0 hour) is a special value that causes the canary to run only once when it is started.
DurationInSeconds (integer) --
How long, in seconds, for the canary to continue making regular runs after it was created. The runs are performed according to the schedule in the Expression value.
RunConfig (dict) --
A structure that contains information for a canary run.
TimeoutInSeconds (integer) --
How long the canary is allowed to run before it must stop.
MemoryInMB (integer) --
The maximum amount of memory available to the canary while it is running, in MB. The value you must be a multiple of 64.
SuccessRetentionPeriodInDays (integer) --
The number of days to retain data about successful runs of this canary.
FailureRetentionPeriodInDays (integer) --
The number of days to retain data about failed runs of this canary.
Status (dict) --
A structure that contains information about the canary's status.
State (string) --
The current state of the canary.
StateReason (string) --
If the canary has insufficient permissions to run, this field provides more details.
StateReasonCode (string) --
If the canary cannot run or has failed, this field displays the reason.
Timeline (dict) --
A structure that contains information about when the canary was created, modified, and most recently run.
Created (datetime) --
The date and time the canary was created.
LastModified (datetime) --
The date and time the canary was most recently modified.
LastStarted (datetime) --
The date and time that the canary's most recent run started.
LastStopped (datetime) --
The date and time that the canary's most recent run ended.
ArtifactS3Location (string) --
The location in Amazon S3 where Synthetics stores artifacts from the runs of this canary. Artifacts include the log file, screenshots, and HAR files.
EngineArn (string) --
The ARN of the Lambda function that is used as your canary's engine. For more information about Lambda ARN format, see Resources and Conditions for Lambda Actions.
RuntimeVersion (string) --
Specifies the runtime version to use for the canary. Currently, the only valid value is syn-1.0 . For more information about runtime versions, see Canary Runtime Versions.
VpcConfig (dict) --
If this canary is to test an endpoint in a VPC, this structure contains information about the subnets and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
VpcId (string) --
The IDs of the VPC where this canary is to run.
SubnetIds (list) --
The IDs of the subnets where this canary is to run.
(string) --
SecurityGroupIds (list) --
The IDs of the security groups for this canary.
(string) --
Tags (dict) --
The list of key-value pairs that are associated with the canary.
(string) --
(string) --
NextToken (string) --
A token that indicates that there is more data available. You can use this token in a subsequent DescribeCanaries operation to retrieve the next set of results.
{'Canary': {'RunConfig': {'MemoryInMB': 'integer'}}}
Retrieves complete information about one canary. You must specify the name of the canary that you want. To get a list of canaries and their names, use DescribeCanaries.
See also: AWS API Documentation
Request Syntax
client.get_canary(
Name='string'
)
string
[REQUIRED]
The name of the canary that you want details for.
dict
Response Syntax
{
'Canary': {
'Id': 'string',
'Name': 'string',
'Code': {
'SourceLocationArn': 'string',
'Handler': 'string'
},
'ExecutionRoleArn': 'string',
'Schedule': {
'Expression': 'string',
'DurationInSeconds': 123
},
'RunConfig': {
'TimeoutInSeconds': 123,
'MemoryInMB': 123
},
'SuccessRetentionPeriodInDays': 123,
'FailureRetentionPeriodInDays': 123,
'Status': {
'State': 'CREATING'|'READY'|'STARTING'|'RUNNING'|'UPDATING'|'STOPPING'|'STOPPED'|'ERROR'|'DELETING',
'StateReason': 'string',
'StateReasonCode': 'INVALID_PERMISSIONS'
},
'Timeline': {
'Created': datetime(2015, 1, 1),
'LastModified': datetime(2015, 1, 1),
'LastStarted': datetime(2015, 1, 1),
'LastStopped': datetime(2015, 1, 1)
},
'ArtifactS3Location': 'string',
'EngineArn': 'string',
'RuntimeVersion': 'string',
'VpcConfig': {
'VpcId': 'string',
'SubnetIds': [
'string',
],
'SecurityGroupIds': [
'string',
]
},
'Tags': {
'string': 'string'
}
}
}
Response Structure
(dict) --
Canary (dict) --
A strucure that contains the full information about the canary.
Id (string) --
The unique ID of this canary.
Name (string) --
The name of the canary.
Code (dict) --
This structure contains information about the canary's Lambda handler and where its code is stored by CloudWatch Synthetics.
SourceLocationArn (string) --
The ARN of the Lambda layer where Synthetics stores the canary script code.
Handler (string) --
The entry point to use for the source code when running the canary.
ExecutionRoleArn (string) --
The ARN of the IAM role used to run the canary. This role must include lambda.amazonaws.com as a principal in the trust policy.
Schedule (dict) --
A structure that contains information about how often the canary is to run, and when these runs are to stop.
Expression (string) --
A rate expression that defines how often the canary is to run. The syntax is rate(number unit) . unit can be minute , minutes , or hour .
For example, rate(1 minute) runs the canary once a minute, rate(10 minutes) runs it once every 10 minutes, and rate(1 hour) runs it once every hour.
Specifying rate(0 minute) or rate(0 hour) is a special value that causes the canary to run only once when it is started.
DurationInSeconds (integer) --
How long, in seconds, for the canary to continue making regular runs after it was created. The runs are performed according to the schedule in the Expression value.
RunConfig (dict) --
A structure that contains information for a canary run.
TimeoutInSeconds (integer) --
How long the canary is allowed to run before it must stop.
MemoryInMB (integer) --
The maximum amount of memory available to the canary while it is running, in MB. The value you must be a multiple of 64.
SuccessRetentionPeriodInDays (integer) --
The number of days to retain data about successful runs of this canary.
FailureRetentionPeriodInDays (integer) --
The number of days to retain data about failed runs of this canary.
Status (dict) --
A structure that contains information about the canary's status.
State (string) --
The current state of the canary.
StateReason (string) --
If the canary has insufficient permissions to run, this field provides more details.
StateReasonCode (string) --
If the canary cannot run or has failed, this field displays the reason.
Timeline (dict) --
A structure that contains information about when the canary was created, modified, and most recently run.
Created (datetime) --
The date and time the canary was created.
LastModified (datetime) --
The date and time the canary was most recently modified.
LastStarted (datetime) --
The date and time that the canary's most recent run started.
LastStopped (datetime) --
The date and time that the canary's most recent run ended.
ArtifactS3Location (string) --
The location in Amazon S3 where Synthetics stores artifacts from the runs of this canary. Artifacts include the log file, screenshots, and HAR files.
EngineArn (string) --
The ARN of the Lambda function that is used as your canary's engine. For more information about Lambda ARN format, see Resources and Conditions for Lambda Actions.
RuntimeVersion (string) --
Specifies the runtime version to use for the canary. Currently, the only valid value is syn-1.0 . For more information about runtime versions, see Canary Runtime Versions.
VpcConfig (dict) --
If this canary is to test an endpoint in a VPC, this structure contains information about the subnets and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
VpcId (string) --
The IDs of the VPC where this canary is to run.
SubnetIds (list) --
The IDs of the subnets where this canary is to run.
(string) --
SecurityGroupIds (list) --
The IDs of the security groups for this canary.
(string) --
Tags (dict) --
The list of key-value pairs that are associated with the canary.
(string) --
(string) --
{'RunConfig': {'MemoryInMB': 'integer'}}
Use this operation to change the settings of a canary that has already been created.
You can't use this operation to update the tags of an existing canary. To change the tags of an existing canary, use TagResource.
See also: AWS API Documentation
Request Syntax
client.update_canary(
Name='string',
Code={
'S3Bucket': 'string',
'S3Key': 'string',
'S3Version': 'string',
'ZipFile': b'bytes',
'Handler': 'string'
},
ExecutionRoleArn='string',
RuntimeVersion='string',
Schedule={
'Expression': 'string',
'DurationInSeconds': 123
},
RunConfig={
'TimeoutInSeconds': 123,
'MemoryInMB': 123
},
SuccessRetentionPeriodInDays=123,
FailureRetentionPeriodInDays=123,
VpcConfig={
'SubnetIds': [
'string',
],
'SecurityGroupIds': [
'string',
]
}
)
string
[REQUIRED]
The name of the canary that you want to update. To find the names of your canaries, use DescribeCanaries.
You cannot change the name of a canary that has already been created.
dict
A structure that includes the entry point from which the canary should start running your script. If the script is stored in an S3 bucket, the bucket name, key, and version are also included.
S3Bucket (string) --
If your canary script is located in S3, specify the full bucket name here. The bucket must already exist. Specify the full bucket name, including s3:// as the start of the bucket name.
S3Key (string) --
The S3 key of your script. For more information, see Working with Amazon S3 Objects.
S3Version (string) --
The S3 version ID of your script.
ZipFile (bytes) --
If you input your canary script directly into the canary instead of referring to an S3 location, the value of this parameter is the .zip file that contains the script. It can be up to 5 MB.
Handler (string) -- [REQUIRED]
The entry point to use for the source code when running the canary. This value must end with the string .handler .
string
The ARN of the IAM role to be used to run the canary. This role must already exist, and must include lambda.amazonaws.com as a principal in the trust policy. The role must also have the following permissions:
s3:PutObject
s3:GetBucketLocation
s3:ListAllMyBuckets
cloudwatch:PutMetricData
logs:CreateLogGroup
logs:CreateLogStream
logs:CreateLogStream
string
Specifies the runtime version to use for the canary. Currently, the only valid value is syn-1.0 . For more information about runtime versions, see Canary Runtime Versions.
dict
A structure that contains information about how often the canary is to run, and when these runs are to stop.
Expression (string) -- [REQUIRED]
A rate expression that defines how often the canary is to run. The syntax is rate(number unit) . unit can be minute , minutes , or hour .
For example, rate(1 minute) runs the canary once a minute, rate(10 minutes) runs it once every 10 minutes, and rate(1 hour) runs it once every hour. You can specify a frequency between rate(1 minute) and rate(1 hour) .
Specifying rate(0 minute) or rate(0 hour) is a special value that causes the canary to run only once when it is started.
DurationInSeconds (integer) --
How long, in seconds, for the canary to continue making regular runs according to the schedule in the Expression value. If you specify 0, the canary continues making runs until you stop it. If you omit this field, the default of 0 is used.
dict
A structure that contains the timeout value that is used for each individual run of the canary.
TimeoutInSeconds (integer) -- [REQUIRED]
How long the canary is allowed to run before it must stop. If you omit this field, the frequency of the canary is used as this value, up to a maximum of 14 minutes.
MemoryInMB (integer) --
The maximum amount of memory available to the canary while it is running, in MB. The value you specify must be a multiple of 64.
integer
The number of days to retain data about successful runs of this canary.
integer
The number of days to retain data about failed runs of this canary.
dict
If this canary is to test an endpoint in a VPC, this structure contains information about the subnet and security groups of the VPC endpoint. For more information, see Running a Canary in a VPC.
SubnetIds (list) --
The IDs of the subnets where this canary is to run.
(string) --
SecurityGroupIds (list) --
The IDs of the security groups for this canary.
(string) --
dict
Response Syntax
{}
Response Structure
(dict) --