Amazon SageMaker Service

2022/09/07 - Amazon SageMaker Service - 2 updated api methods

Changes  SageMaker Hosting now allows customization on ML instance storage volume size, model data download timeout and inference container startup ping health check timeout for each ProductionVariant in CreateEndpointConfig API.

CreateEndpointConfig (updated) Link ¶
Changes (request)
{'ProductionVariants': {'ContainerStartupHealthCheckTimeoutInSeconds': 'integer',
                        'ModelDataDownloadTimeoutInSeconds': 'integer',
                        'VolumeSizeInGB': 'integer'}}

Creates an endpoint configuration that SageMaker hosting services uses to deploy models. In the configuration, you identify one or more models, created using the CreateModel API, to deploy and the resources that you want SageMaker to provision. Then you call the CreateEndpoint API.

Note

Use this API if you want to use SageMaker hosting services to deploy models into production.

In the request, you define a ProductionVariant , for each model that you want to deploy. Each ProductionVariant parameter also describes the resources that you want SageMaker to provision. This includes the number and type of ML compute instances to deploy.

If you are hosting multiple models, you also assign a VariantWeight to specify how much traffic you want to allocate to each model. For example, suppose that you want to host two models, A and B, and you assign traffic weight 2 for model A and 1 for model B. SageMaker distributes two-thirds of the traffic to Model A, and one-third to model B.

Note

When you call CreateEndpoint, a load call is made to DynamoDB to verify that your endpoint configuration exists. When you read data from a DynamoDB table supporting Eventually Consistent Reads, the response might not reflect the results of a recently completed write operation. The response might include some stale data. If the dependent entities are not yet in DynamoDB, this causes a validation error. If you repeat your read request after a short time, the response should return the latest data. So retry logic is recommended to handle these possible issues. We also recommend that customers call DescribeEndpointConfig before calling CreateEndpoint to minimize the potential impact of a DynamoDB eventually consistent read.

See also: AWS API Documentation

Request Syntax

client.create_endpoint_config(
    EndpointConfigName='string',
    ProductionVariants=[
        {
            'VariantName': 'string',
            'ModelName': 'string',
            'InitialInstanceCount': 123,
            'InstanceType': 'ml.t2.medium'|'ml.t2.large'|'ml.t2.xlarge'|'ml.t2.2xlarge'|'ml.m4.xlarge'|'ml.m4.2xlarge'|'ml.m4.4xlarge'|'ml.m4.10xlarge'|'ml.m4.16xlarge'|'ml.m5.large'|'ml.m5.xlarge'|'ml.m5.2xlarge'|'ml.m5.4xlarge'|'ml.m5.12xlarge'|'ml.m5.24xlarge'|'ml.m5d.large'|'ml.m5d.xlarge'|'ml.m5d.2xlarge'|'ml.m5d.4xlarge'|'ml.m5d.12xlarge'|'ml.m5d.24xlarge'|'ml.c4.large'|'ml.c4.xlarge'|'ml.c4.2xlarge'|'ml.c4.4xlarge'|'ml.c4.8xlarge'|'ml.p2.xlarge'|'ml.p2.8xlarge'|'ml.p2.16xlarge'|'ml.p3.2xlarge'|'ml.p3.8xlarge'|'ml.p3.16xlarge'|'ml.c5.large'|'ml.c5.xlarge'|'ml.c5.2xlarge'|'ml.c5.4xlarge'|'ml.c5.9xlarge'|'ml.c5.18xlarge'|'ml.c5d.large'|'ml.c5d.xlarge'|'ml.c5d.2xlarge'|'ml.c5d.4xlarge'|'ml.c5d.9xlarge'|'ml.c5d.18xlarge'|'ml.g4dn.xlarge'|'ml.g4dn.2xlarge'|'ml.g4dn.4xlarge'|'ml.g4dn.8xlarge'|'ml.g4dn.12xlarge'|'ml.g4dn.16xlarge'|'ml.r5.large'|'ml.r5.xlarge'|'ml.r5.2xlarge'|'ml.r5.4xlarge'|'ml.r5.12xlarge'|'ml.r5.24xlarge'|'ml.r5d.large'|'ml.r5d.xlarge'|'ml.r5d.2xlarge'|'ml.r5d.4xlarge'|'ml.r5d.12xlarge'|'ml.r5d.24xlarge'|'ml.inf1.xlarge'|'ml.inf1.2xlarge'|'ml.inf1.6xlarge'|'ml.inf1.24xlarge'|'ml.c6i.large'|'ml.c6i.xlarge'|'ml.c6i.2xlarge'|'ml.c6i.4xlarge'|'ml.c6i.8xlarge'|'ml.c6i.12xlarge'|'ml.c6i.16xlarge'|'ml.c6i.24xlarge'|'ml.c6i.32xlarge'|'ml.g5.xlarge'|'ml.g5.2xlarge'|'ml.g5.4xlarge'|'ml.g5.8xlarge'|'ml.g5.12xlarge'|'ml.g5.16xlarge'|'ml.g5.24xlarge'|'ml.g5.48xlarge'|'ml.p4d.24xlarge',
            'InitialVariantWeight': ...,
            'AcceleratorType': 'ml.eia1.medium'|'ml.eia1.large'|'ml.eia1.xlarge'|'ml.eia2.medium'|'ml.eia2.large'|'ml.eia2.xlarge',
            'CoreDumpConfig': {
                'DestinationS3Uri': 'string',
                'KmsKeyId': 'string'
            },
            'ServerlessConfig': {
                'MemorySizeInMB': 123,
                'MaxConcurrency': 123
            },
            'VolumeSizeInGB': 123,
            'ModelDataDownloadTimeoutInSeconds': 123,
            'ContainerStartupHealthCheckTimeoutInSeconds': 123
        },
    ],
    DataCaptureConfig={
        'EnableCapture': True|False,
        'InitialSamplingPercentage': 123,
        'DestinationS3Uri': 'string',
        'KmsKeyId': 'string',
        'CaptureOptions': [
            {
                'CaptureMode': 'Input'|'Output'
            },
        ],
        'CaptureContentTypeHeader': {
            'CsvContentTypes': [
                'string',
            ],
            'JsonContentTypes': [
                'string',
            ]
        }
    },
    Tags=[
        {
            'Key': 'string',
            'Value': 'string'
        },
    ],
    KmsKeyId='string',
    AsyncInferenceConfig={
        'ClientConfig': {
            'MaxConcurrentInvocationsPerInstance': 123
        },
        'OutputConfig': {
            'KmsKeyId': 'string',
            'S3OutputPath': 'string',
            'NotificationConfig': {
                'SuccessTopic': 'string',
                'ErrorTopic': 'string'
            }
        }
    }
)
type EndpointConfigName

string

param EndpointConfigName

[REQUIRED]

The name of the endpoint configuration. You specify this name in a CreateEndpoint request.

type ProductionVariants

list

param ProductionVariants

[REQUIRED]

An list of ProductionVariant objects, one for each model that you want to host at this endpoint.

  • (dict) --

    Identifies a model that you want to host and the resources chosen to deploy for hosting it. If you are deploying multiple models, tell SageMaker how to distribute traffic among the models by specifying variant weights.

    • VariantName (string) -- [REQUIRED]

      The name of the production variant.

    • ModelName (string) -- [REQUIRED]

      The name of the model that you want to host. This is the name that you specified when creating the model.

    • InitialInstanceCount (integer) --

      Number of instances to launch initially.

    • InstanceType (string) --

      The ML compute instance type.

    • InitialVariantWeight (float) --

      Determines initial traffic distribution among all of the models that you specify in the endpoint configuration. The traffic to a production variant is determined by the ratio of the VariantWeight to the sum of all VariantWeight values across all ProductionVariants. If unspecified, it defaults to 1.0.

    • AcceleratorType (string) --

      The size of the Elastic Inference (EI) instance to use for the production variant. EI instances provide on-demand GPU computing for inference. For more information, see Using Elastic Inference in Amazon SageMaker.

    • CoreDumpConfig (dict) --

      Specifies configuration for a core dump from the model container when the process crashes.

      • DestinationS3Uri (string) -- [REQUIRED]

        The Amazon S3 bucket to send the core dump to.

      • KmsKeyId (string) --

        The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that SageMaker uses to encrypt the core dump data at rest using Amazon S3 server-side encryption. The KmsKeyId can be any of the following formats:

        • // KMS Key ID "1234abcd-12ab-34cd-56ef-1234567890ab"

        • // Amazon Resource Name (ARN) of a KMS Key "arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab"

        • // KMS Key Alias "alias/ExampleAlias"

        • // Amazon Resource Name (ARN) of a KMS Key Alias "arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias"

        If you use a KMS key ID or an alias of your KMS key, the SageMaker execution role must include permissions to call kms:Encrypt . If you don't provide a KMS key ID, SageMaker uses the default KMS key for Amazon S3 for your role's account. SageMaker uses server-side encryption with KMS-managed keys for OutputDataConfig . If you use a bucket policy with an s3:PutObject permission that only allows objects with server-side encryption, set the condition key of s3:x-amz-server-side-encryption to "aws:kms" . For more information, see KMS-Managed Encryption Keys in the Amazon Simple Storage Service Developer Guide.

        The KMS key policy must grant permission to the IAM role that you specify in your CreateEndpoint and UpdateEndpoint requests. For more information, see Using Key Policies in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide .

    • ServerlessConfig (dict) --

      The serverless configuration for an endpoint. Specifies a serverless endpoint configuration instead of an instance-based endpoint configuration.

      • MemorySizeInMB (integer) -- [REQUIRED]

        The memory size of your serverless endpoint. Valid values are in 1 GB increments: 1024 MB, 2048 MB, 3072 MB, 4096 MB, 5120 MB, or 6144 MB.

      • MaxConcurrency (integer) -- [REQUIRED]

        The maximum number of concurrent invocations your serverless endpoint can process.

    • VolumeSizeInGB (integer) --

      The size, in GB, of the ML storage volume attached to individual inference instance associated with the production variant. Currenly only Amazon EBS gp2 storage volumes are supported.

    • ModelDataDownloadTimeoutInSeconds (integer) --

      The timeout value, in seconds, to download and extract customer model artifact from Amazon S3 to individual inference instance associated with this production variant.

    • ContainerStartupHealthCheckTimeoutInSeconds (integer) --

      The timeout value, in seconds, for the customer inference container to pass health check by SageMaker Hosting. For more information on health check, see How Your Container Should Respond to Health Check (Ping) Requests.

type DataCaptureConfig

dict

param DataCaptureConfig

Configuration to control how SageMaker captures inference data.

  • EnableCapture (boolean) --

    Whether data capture should be enabled or disabled (defaults to enabled).

  • InitialSamplingPercentage (integer) -- [REQUIRED]

    The percentage of requests SageMaker will capture. A lower value is recommended for Endpoints with high traffic.

  • DestinationS3Uri (string) -- [REQUIRED]

    The Amazon S3 location used to capture the data.

  • KmsKeyId (string) --

    The Amazon Resource Name (ARN) of a Amazon Web Services Key Management Service key that SageMaker uses to encrypt data on the storage volume attached to the ML compute instance that hosts the endpoint.

    The KmsKeyId can be any of the following formats:

    • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

    • Key ARN: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

    • Alias name: alias/ExampleAlias

    • Alias name ARN: arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias

  • CaptureOptions (list) -- [REQUIRED]

    Specifies data Model Monitor will capture. You can configure whether to collect only input, only output, or both

    • (dict) --

      Specifies data Model Monitor will capture.

      • CaptureMode (string) -- [REQUIRED]

        Specify the boundary of data to capture.

  • CaptureContentTypeHeader (dict) --

    Configuration specifying how to treat different headers. If no headers are specified SageMaker will by default base64 encode when capturing the data.

    • CsvContentTypes (list) --

      The list of all content type headers that SageMaker will treat as CSV and capture accordingly.

      • (string) --

    • JsonContentTypes (list) --

      The list of all content type headers that SageMaker will treat as JSON and capture accordingly.

      • (string) --

type Tags

list

param Tags

An array of key-value pairs. You can use tags to categorize your Amazon Web Services resources in different ways, for example, by purpose, owner, or environment. For more information, see Tagging Amazon Web Services Resources.

  • (dict) --

    A tag object that consists of a key and an optional value, used to manage metadata for SageMaker Amazon Web Services resources.

    You can add tags to notebook instances, training jobs, hyperparameter tuning jobs, batch transform jobs, models, labeling jobs, work teams, endpoint configurations, and endpoints. For more information on adding tags to SageMaker resources, see AddTags.

    For more information on adding metadata to your Amazon Web Services resources with tagging, see Tagging Amazon Web Services resources. For advice on best practices for managing Amazon Web Services resources with tagging, see Tagging Best Practices: Implement an Effective Amazon Web Services Resource Tagging Strategy.

    • Key (string) -- [REQUIRED]

      The tag key. Tag keys must be unique per resource.

    • Value (string) -- [REQUIRED]

      The tag value.

type KmsKeyId

string

param KmsKeyId

The Amazon Resource Name (ARN) of a Amazon Web Services Key Management Service key that SageMaker uses to encrypt data on the storage volume attached to the ML compute instance that hosts the endpoint.

The KmsKeyId can be any of the following formats:

  • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

  • Key ARN: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

  • Alias name: alias/ExampleAlias

  • Alias name ARN: arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias

The KMS key policy must grant permission to the IAM role that you specify in your CreateEndpoint , UpdateEndpoint requests. For more information, refer to the Amazon Web Services Key Management Service section Using Key Policies in Amazon Web Services KMS

Note

Certain Nitro-based instances include local storage, dependent on the instance type. Local storage volumes are encrypted using a hardware module on the instance. You can't request a KmsKeyId when using an instance type with local storage. If any of the models that you specify in the ProductionVariants parameter use nitro-based instances with local storage, do not specify a value for the KmsKeyId parameter. If you specify a value for KmsKeyId when using any nitro-based instances with local storage, the call to CreateEndpointConfig fails.

For a list of instance types that support local instance storage, see Instance Store Volumes.

For more information about local instance storage encryption, see SSD Instance Store Volumes.

type AsyncInferenceConfig

dict

param AsyncInferenceConfig

Specifies configuration for how an endpoint performs asynchronous inference. This is a required field in order for your Endpoint to be invoked using InvokeEndpointAsync.

  • ClientConfig (dict) --

    Configures the behavior of the client used by SageMaker to interact with the model container during asynchronous inference.

    • MaxConcurrentInvocationsPerInstance (integer) --

      The maximum number of concurrent requests sent by the SageMaker client to the model container. If no value is provided, SageMaker chooses an optimal value.

  • OutputConfig (dict) -- [REQUIRED]

    Specifies the configuration for asynchronous inference invocation outputs.

    • KmsKeyId (string) --

      The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that SageMaker uses to encrypt the asynchronous inference output in Amazon S3.

    • S3OutputPath (string) -- [REQUIRED]

      The Amazon S3 location to upload inference responses to.

    • NotificationConfig (dict) --

      Specifies the configuration for notifications of inference results for asynchronous inference.

      • SuccessTopic (string) --

        Amazon SNS topic to post a notification to when inference completes successfully. If no topic is provided, no notification is sent on success.

      • ErrorTopic (string) --

        Amazon SNS topic to post a notification to when inference fails. If no topic is provided, no notification is sent on failure.

rtype

dict

returns

Response Syntax

{
    'EndpointConfigArn': 'string'
}

Response Structure

  • (dict) --

    • EndpointConfigArn (string) --

      The Amazon Resource Name (ARN) of the endpoint configuration.

DescribeEndpointConfig (updated) Link ¶
Changes (response)
{'ProductionVariants': {'ContainerStartupHealthCheckTimeoutInSeconds': 'integer',
                        'ModelDataDownloadTimeoutInSeconds': 'integer',
                        'VolumeSizeInGB': 'integer'}}

Returns the description of an endpoint configuration created using the CreateEndpointConfig API.

See also: AWS API Documentation

Request Syntax

client.describe_endpoint_config(
    EndpointConfigName='string'
)
type EndpointConfigName

string

param EndpointConfigName

[REQUIRED]

The name of the endpoint configuration.

rtype

dict

returns

Response Syntax

{
    'EndpointConfigName': 'string',
    'EndpointConfigArn': 'string',
    'ProductionVariants': [
        {
            'VariantName': 'string',
            'ModelName': 'string',
            'InitialInstanceCount': 123,
            'InstanceType': 'ml.t2.medium'|'ml.t2.large'|'ml.t2.xlarge'|'ml.t2.2xlarge'|'ml.m4.xlarge'|'ml.m4.2xlarge'|'ml.m4.4xlarge'|'ml.m4.10xlarge'|'ml.m4.16xlarge'|'ml.m5.large'|'ml.m5.xlarge'|'ml.m5.2xlarge'|'ml.m5.4xlarge'|'ml.m5.12xlarge'|'ml.m5.24xlarge'|'ml.m5d.large'|'ml.m5d.xlarge'|'ml.m5d.2xlarge'|'ml.m5d.4xlarge'|'ml.m5d.12xlarge'|'ml.m5d.24xlarge'|'ml.c4.large'|'ml.c4.xlarge'|'ml.c4.2xlarge'|'ml.c4.4xlarge'|'ml.c4.8xlarge'|'ml.p2.xlarge'|'ml.p2.8xlarge'|'ml.p2.16xlarge'|'ml.p3.2xlarge'|'ml.p3.8xlarge'|'ml.p3.16xlarge'|'ml.c5.large'|'ml.c5.xlarge'|'ml.c5.2xlarge'|'ml.c5.4xlarge'|'ml.c5.9xlarge'|'ml.c5.18xlarge'|'ml.c5d.large'|'ml.c5d.xlarge'|'ml.c5d.2xlarge'|'ml.c5d.4xlarge'|'ml.c5d.9xlarge'|'ml.c5d.18xlarge'|'ml.g4dn.xlarge'|'ml.g4dn.2xlarge'|'ml.g4dn.4xlarge'|'ml.g4dn.8xlarge'|'ml.g4dn.12xlarge'|'ml.g4dn.16xlarge'|'ml.r5.large'|'ml.r5.xlarge'|'ml.r5.2xlarge'|'ml.r5.4xlarge'|'ml.r5.12xlarge'|'ml.r5.24xlarge'|'ml.r5d.large'|'ml.r5d.xlarge'|'ml.r5d.2xlarge'|'ml.r5d.4xlarge'|'ml.r5d.12xlarge'|'ml.r5d.24xlarge'|'ml.inf1.xlarge'|'ml.inf1.2xlarge'|'ml.inf1.6xlarge'|'ml.inf1.24xlarge'|'ml.c6i.large'|'ml.c6i.xlarge'|'ml.c6i.2xlarge'|'ml.c6i.4xlarge'|'ml.c6i.8xlarge'|'ml.c6i.12xlarge'|'ml.c6i.16xlarge'|'ml.c6i.24xlarge'|'ml.c6i.32xlarge'|'ml.g5.xlarge'|'ml.g5.2xlarge'|'ml.g5.4xlarge'|'ml.g5.8xlarge'|'ml.g5.12xlarge'|'ml.g5.16xlarge'|'ml.g5.24xlarge'|'ml.g5.48xlarge'|'ml.p4d.24xlarge',
            'InitialVariantWeight': ...,
            'AcceleratorType': 'ml.eia1.medium'|'ml.eia1.large'|'ml.eia1.xlarge'|'ml.eia2.medium'|'ml.eia2.large'|'ml.eia2.xlarge',
            'CoreDumpConfig': {
                'DestinationS3Uri': 'string',
                'KmsKeyId': 'string'
            },
            'ServerlessConfig': {
                'MemorySizeInMB': 123,
                'MaxConcurrency': 123
            },
            'VolumeSizeInGB': 123,
            'ModelDataDownloadTimeoutInSeconds': 123,
            'ContainerStartupHealthCheckTimeoutInSeconds': 123
        },
    ],
    'DataCaptureConfig': {
        'EnableCapture': True|False,
        'InitialSamplingPercentage': 123,
        'DestinationS3Uri': 'string',
        'KmsKeyId': 'string',
        'CaptureOptions': [
            {
                'CaptureMode': 'Input'|'Output'
            },
        ],
        'CaptureContentTypeHeader': {
            'CsvContentTypes': [
                'string',
            ],
            'JsonContentTypes': [
                'string',
            ]
        }
    },
    'KmsKeyId': 'string',
    'CreationTime': datetime(2015, 1, 1),
    'AsyncInferenceConfig': {
        'ClientConfig': {
            'MaxConcurrentInvocationsPerInstance': 123
        },
        'OutputConfig': {
            'KmsKeyId': 'string',
            'S3OutputPath': 'string',
            'NotificationConfig': {
                'SuccessTopic': 'string',
                'ErrorTopic': 'string'
            }
        }
    }
}

Response Structure

  • (dict) --

    • EndpointConfigName (string) --

      Name of the SageMaker endpoint configuration.

    • EndpointConfigArn (string) --

      The Amazon Resource Name (ARN) of the endpoint configuration.

    • ProductionVariants (list) --

      An array of ProductionVariant objects, one for each model that you want to host at this endpoint.

      • (dict) --

        Identifies a model that you want to host and the resources chosen to deploy for hosting it. If you are deploying multiple models, tell SageMaker how to distribute traffic among the models by specifying variant weights.

        • VariantName (string) --

          The name of the production variant.

        • ModelName (string) --

          The name of the model that you want to host. This is the name that you specified when creating the model.

        • InitialInstanceCount (integer) --

          Number of instances to launch initially.

        • InstanceType (string) --

          The ML compute instance type.

        • InitialVariantWeight (float) --

          Determines initial traffic distribution among all of the models that you specify in the endpoint configuration. The traffic to a production variant is determined by the ratio of the VariantWeight to the sum of all VariantWeight values across all ProductionVariants. If unspecified, it defaults to 1.0.

        • AcceleratorType (string) --

          The size of the Elastic Inference (EI) instance to use for the production variant. EI instances provide on-demand GPU computing for inference. For more information, see Using Elastic Inference in Amazon SageMaker.

        • CoreDumpConfig (dict) --

          Specifies configuration for a core dump from the model container when the process crashes.

          • DestinationS3Uri (string) --

            The Amazon S3 bucket to send the core dump to.

          • KmsKeyId (string) --

            The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that SageMaker uses to encrypt the core dump data at rest using Amazon S3 server-side encryption. The KmsKeyId can be any of the following formats:

            • // KMS Key ID "1234abcd-12ab-34cd-56ef-1234567890ab"

            • // Amazon Resource Name (ARN) of a KMS Key "arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab"

            • // KMS Key Alias "alias/ExampleAlias"

            • // Amazon Resource Name (ARN) of a KMS Key Alias "arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias"

            If you use a KMS key ID or an alias of your KMS key, the SageMaker execution role must include permissions to call kms:Encrypt . If you don't provide a KMS key ID, SageMaker uses the default KMS key for Amazon S3 for your role's account. SageMaker uses server-side encryption with KMS-managed keys for OutputDataConfig . If you use a bucket policy with an s3:PutObject permission that only allows objects with server-side encryption, set the condition key of s3:x-amz-server-side-encryption to "aws:kms" . For more information, see KMS-Managed Encryption Keys in the Amazon Simple Storage Service Developer Guide.

            The KMS key policy must grant permission to the IAM role that you specify in your CreateEndpoint and UpdateEndpoint requests. For more information, see Using Key Policies in Amazon Web Services KMS in the Amazon Web Services Key Management Service Developer Guide .

        • ServerlessConfig (dict) --

          The serverless configuration for an endpoint. Specifies a serverless endpoint configuration instead of an instance-based endpoint configuration.

          • MemorySizeInMB (integer) --

            The memory size of your serverless endpoint. Valid values are in 1 GB increments: 1024 MB, 2048 MB, 3072 MB, 4096 MB, 5120 MB, or 6144 MB.

          • MaxConcurrency (integer) --

            The maximum number of concurrent invocations your serverless endpoint can process.

        • VolumeSizeInGB (integer) --

          The size, in GB, of the ML storage volume attached to individual inference instance associated with the production variant. Currenly only Amazon EBS gp2 storage volumes are supported.

        • ModelDataDownloadTimeoutInSeconds (integer) --

          The timeout value, in seconds, to download and extract customer model artifact from Amazon S3 to individual inference instance associated with this production variant.

        • ContainerStartupHealthCheckTimeoutInSeconds (integer) --

          The timeout value, in seconds, for the customer inference container to pass health check by SageMaker Hosting. For more information on health check, see How Your Container Should Respond to Health Check (Ping) Requests.

    • DataCaptureConfig (dict) --

      Configuration to control how SageMaker captures inference data.

      • EnableCapture (boolean) --

        Whether data capture should be enabled or disabled (defaults to enabled).

      • InitialSamplingPercentage (integer) --

        The percentage of requests SageMaker will capture. A lower value is recommended for Endpoints with high traffic.

      • DestinationS3Uri (string) --

        The Amazon S3 location used to capture the data.

      • KmsKeyId (string) --

        The Amazon Resource Name (ARN) of a Amazon Web Services Key Management Service key that SageMaker uses to encrypt data on the storage volume attached to the ML compute instance that hosts the endpoint.

        The KmsKeyId can be any of the following formats:

        • Key ID: 1234abcd-12ab-34cd-56ef-1234567890ab

        • Key ARN: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

        • Alias name: alias/ExampleAlias

        • Alias name ARN: arn:aws:kms:us-west-2:111122223333:alias/ExampleAlias

      • CaptureOptions (list) --

        Specifies data Model Monitor will capture. You can configure whether to collect only input, only output, or both

        • (dict) --

          Specifies data Model Monitor will capture.

          • CaptureMode (string) --

            Specify the boundary of data to capture.

      • CaptureContentTypeHeader (dict) --

        Configuration specifying how to treat different headers. If no headers are specified SageMaker will by default base64 encode when capturing the data.

        • CsvContentTypes (list) --

          The list of all content type headers that SageMaker will treat as CSV and capture accordingly.

          • (string) --

        • JsonContentTypes (list) --

          The list of all content type headers that SageMaker will treat as JSON and capture accordingly.

          • (string) --

    • KmsKeyId (string) --

      Amazon Web Services KMS key ID Amazon SageMaker uses to encrypt data when storing it on the ML storage volume attached to the instance.

    • CreationTime (datetime) --

      A timestamp that shows when the endpoint configuration was created.

    • AsyncInferenceConfig (dict) --

      Returns the description of an endpoint configuration created using the CreateEndpointConfig API.

      • ClientConfig (dict) --

        Configures the behavior of the client used by SageMaker to interact with the model container during asynchronous inference.

        • MaxConcurrentInvocationsPerInstance (integer) --

          The maximum number of concurrent requests sent by the SageMaker client to the model container. If no value is provided, SageMaker chooses an optimal value.

      • OutputConfig (dict) --

        Specifies the configuration for asynchronous inference invocation outputs.

        • KmsKeyId (string) --

          The Amazon Web Services Key Management Service (Amazon Web Services KMS) key that SageMaker uses to encrypt the asynchronous inference output in Amazon S3.

        • S3OutputPath (string) --

          The Amazon S3 location to upload inference responses to.

        • NotificationConfig (dict) --

          Specifies the configuration for notifications of inference results for asynchronous inference.

          • SuccessTopic (string) --

            Amazon SNS topic to post a notification to when inference completes successfully. If no topic is provided, no notification is sent on success.

          • ErrorTopic (string) --

            Amazon SNS topic to post a notification to when inference fails. If no topic is provided, no notification is sent on failure.