2019/11/20 - AWS CloudTrail - 2 new5 updated api methods
Changes Update cloudtrail client to latest version
Describes the settings for the Insights event selectors that you configured for your trail. GetInsightSelectors shows if CloudTrail Insights event logging is enabled on the trail, and if it is, which insight types are enabled. If you run GetInsightSelectors on a trail that does not have Insights events enabled, the operation throws the exception InsightNotEnabledException
For more information, see Logging CloudTrail Insights Events for Trails in the AWS CloudTrail User Guide.
See also: AWS API Documentation
Request Syntax
client.get_insight_selectors(
TrailName='string'
)
string
[REQUIRED]
Specifies the name of the trail or trail ARN. If you specify a trail name, the string must meet the following requirements:
Contain only ASCII letters (a-z, A-Z), numbers (0-9), periods (.), underscores (_), or dashes (-)
Start with a letter or number, and end with a letter or number
Be between 3 and 128 characters
Have no adjacent periods, underscores or dashes. Names like my-_namespace and my--namespace are not valid.
Not be in IP address format (for example, 192.168.5.4)
If you specify a trail ARN, it must be in the format:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
dict
Response Syntax
{
'TrailARN': 'string',
'InsightSelectors': [
{
'InsightType': 'ApiCallRateInsight'
},
]
}
Response Structure
(dict) --
TrailARN (string) --
The Amazon Resource Name (ARN) of a trail for which you want to get Insights selectors.
InsightSelectors (list) --
A JSON string that contains the insight types you want to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
(dict) --
A JSON string that contains a list of insight types that are logged on a trail.
InsightType (string) --
The type of insights to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
Lets you enable Insights event logging by specifying the Insights selectors that you want to enable on an existing trail. You also use PutInsightSelectors to turn off Insights event logging, by passing an empty list of insight types. In this release, only ApiCallRateInsight is supported as an Insights selector.
See also: AWS API Documentation
Request Syntax
client.put_insight_selectors(
TrailName='string',
InsightSelectors=[
{
'InsightType': 'ApiCallRateInsight'
},
]
)
string
[REQUIRED]
The name of the CloudTrail trail for which you want to change or add Insights selectors.
list
[REQUIRED]
A JSON string that contains the insight types you want to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
(dict) --
A JSON string that contains a list of insight types that are logged on a trail.
InsightType (string) --
The type of insights to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
dict
Response Syntax
{
'TrailARN': 'string',
'InsightSelectors': [
{
'InsightType': 'ApiCallRateInsight'
},
]
}
Response Structure
(dict) --
TrailARN (string) --
The Amazon Resource Name (ARN) of a trail for which you want to change or add Insights selectors.
InsightSelectors (list) --
A JSON string that contains the insight types you want to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
(dict) --
A JSON string that contains a list of insight types that are logged on a trail.
InsightType (string) --
The type of insights to log on a trail. In this release, only ApiCallRateInsight is supported as an insight type.
{'trailList': {'HasInsightSelectors': 'boolean'}}
Retrieves settings for one or more trails associated with the current region for your account.
See also: AWS API Documentation
Request Syntax
client.describe_trails(
trailNameList=[
'string',
],
includeShadowTrails=True|False
)
list
Specifies a list of trail names, trail ARNs, or both, of the trails to describe. The format of a trail ARN is:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
If an empty list is specified, information for the trail in the current region is returned.
If an empty list is specified and IncludeShadowTrails is false, then information for all trails in the current region is returned.
If an empty list is specified and IncludeShadowTrails is null or true, then information for all trails in the current region and any associated shadow trails in other regions is returned.
(string) --
boolean
Specifies whether to include shadow trails in the response. A shadow trail is the replication in a region of a trail that was created in a different region, or in the case of an organization trail, the replication of an organization trail in member accounts. If you do not include shadow trails, organization trails in a member account and region replication trails will not be returned. The default is true.
dict
Response Syntax
{
'trailList': [
{
'Name': 'string',
'S3BucketName': 'string',
'S3KeyPrefix': 'string',
'SnsTopicName': 'string',
'SnsTopicARN': 'string',
'IncludeGlobalServiceEvents': True|False,
'IsMultiRegionTrail': True|False,
'HomeRegion': 'string',
'TrailARN': 'string',
'LogFileValidationEnabled': True|False,
'CloudWatchLogsLogGroupArn': 'string',
'CloudWatchLogsRoleArn': 'string',
'KmsKeyId': 'string',
'HasCustomEventSelectors': True|False,
'HasInsightSelectors': True|False,
'IsOrganizationTrail': True|False
},
]
}
Response Structure
(dict) --
Returns the objects or data listed below if successful. Otherwise, returns an error.
trailList (list) --
The list of trail objects. Trail objects with string values are only returned if values for the objects exist in a trail's configuration. For example, SNSTopicName and SNSTopicARN are only returned in results if a trail is configured to send SNS notifications. Similarly, KMSKeyId only appears in results if a trail's log files are encrypted with AWS KMS-managed keys.
(dict) --
The settings for a trail.
Name (string) --
Name of the trail set by calling CreateTrail. The maximum length is 128 characters.
S3BucketName (string) --
Name of the Amazon S3 bucket into which CloudTrail delivers your trail files. See Amazon S3 Bucket Naming Requirements.
S3KeyPrefix (string) --
Specifies the Amazon S3 key prefix that comes after the name of the bucket you have designated for log file delivery. For more information, see Finding Your CloudTrail Log Files.The maximum length is 200 characters.
SnsTopicName (string) --
This field is no longer in use. Use SnsTopicARN.
SnsTopicARN (string) --
Specifies the ARN of the Amazon SNS topic that CloudTrail uses to send notifications when log files are delivered. The format of a topic ARN is:
arn:aws:sns:us-east-2:123456789012:MyTopic
IncludeGlobalServiceEvents (boolean) --
Set to True to include AWS API calls from AWS global services such as IAM. Otherwise, False.
IsMultiRegionTrail (boolean) --
Specifies whether the trail exists only in one region or exists in all regions.
HomeRegion (string) --
The region in which the trail was created.
TrailARN (string) --
Specifies the ARN of the trail. The format of a trail ARN is:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
LogFileValidationEnabled (boolean) --
Specifies whether log file validation is enabled.
CloudWatchLogsLogGroupArn (string) --
Specifies an Amazon Resource Name (ARN), a unique identifier that represents the log group to which CloudTrail logs will be delivered.
CloudWatchLogsRoleArn (string) --
Specifies the role for the CloudWatch Logs endpoint to assume to write to a user's log group.
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the logs delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the format:
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
HasCustomEventSelectors (boolean) --
Specifies if the trail has custom event selectors.
HasInsightSelectors (boolean) --
Specifies whether a trail has insight types specified in an InsightSelector list.
IsOrganizationTrail (boolean) --
Specifies whether the trail is an organization trail.
{'EventSelectors': {'ExcludeManagementEventSources': ['string']}}
Describes the settings for the event selectors that you configured for your trail. The information returned for your event selectors includes the following:
If your event selector includes read-only events, write-only events, or all events. This applies to both management events and data events.
If your event selector includes management events.
If your event selector includes data events, the Amazon S3 objects or AWS Lambda functions that you are logging for data events.
For more information, see Logging Data and Management Events for Trails in the AWS CloudTrail User Guide.
See also: AWS API Documentation
Request Syntax
client.get_event_selectors(
TrailName='string'
)
string
[REQUIRED]
Specifies the name of the trail or trail ARN. If you specify a trail name, the string must meet the following requirements:
Contain only ASCII letters (a-z, A-Z), numbers (0-9), periods (.), underscores (_), or dashes (-)
Start with a letter or number, and end with a letter or number
Be between 3 and 128 characters
Have no adjacent periods, underscores or dashes. Names like my-_namespace and my--namespace are not valid.
Not be in IP address format (for example, 192.168.5.4)
If you specify a trail ARN, it must be in the format:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
dict
Response Syntax
{
'TrailARN': 'string',
'EventSelectors': [
{
'ReadWriteType': 'ReadOnly'|'WriteOnly'|'All',
'IncludeManagementEvents': True|False,
'DataResources': [
{
'Type': 'string',
'Values': [
'string',
]
},
],
'ExcludeManagementEventSources': [
'string',
]
},
]
}
Response Structure
(dict) --
TrailARN (string) --
The specified trail ARN that has the event selectors.
EventSelectors (list) --
The event selectors that are configured for the trail.
(dict) --
Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events. When an event occurs in your account, CloudTrail evaluates the event selector for all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn't match any event selector, the trail doesn't log the event.
You can configure up to five event selectors for a trail.
ReadWriteType (string) --
Specify if you want your trail to log read-only events, write-only events, or all. For example, the EC2 GetConsoleOutput is a read-only API operation and RunInstances is a write-only API operation.
By default, the value is All.
IncludeManagementEvents (boolean) --
Specify if you want your event selector to include management events for your trail.
For more information, see Management Events in the AWS CloudTrail User Guide.
By default, the value is true.
DataResources (list) --
CloudTrail supports data event logging for Amazon S3 objects and AWS Lambda functions. You can specify up to 250 resources for an individual event selector, but the total number of data resources cannot exceed 250 across all event selectors in a trail. This limit does not apply if you configure resource logging for all data events.
For more information, see Data Events and Limits in AWS CloudTrail in the AWS CloudTrail User Guide.
(dict) --
The Amazon S3 buckets or AWS Lambda functions that you specify in your event selectors for your trail to log data events. Data events provide information about the resource operations performed on or within a resource itself. These are also known as data plane operations. You can specify up to 250 data resources for a trail.
The following example demonstrates how logging works when you configure logging of all data events for an S3 bucket named bucket-1. In this example, the CloudTrail user specified an empty prefix, and the option to log both Read and Write data events.
A user uploads an image file to bucket-1.
The PutObject API operation is an Amazon S3 object-level API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified an S3 bucket with an empty prefix, events that occur on any object in that bucket are logged. The trail processes and logs the event.
A user uploads an object to an Amazon S3 bucket named arn:aws:s3:::bucket-2.
The PutObject API operation occurred for an object in an S3 bucket that the CloudTrail user didn't specify for the trail. The trail doesn’t log the event.
The following example demonstrates how logging works when you configure logging of AWS Lambda data events for a Lambda function named MyLambdaFunction, but not for all AWS Lambda functions.
A user runs a script that includes a call to the MyLambdaFunction function and the MyOtherLambdaFunction function.
The Invoke API operation on MyLambdaFunction is an AWS Lambda API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified logging data events for MyLambdaFunction, any invocations of that function are logged. The trail processes and logs the event.
The Invoke API operation on MyOtherLambdaFunction is an AWS Lambda API. Because the CloudTrail user did not specify logging data events for all Lambda functions, the Invoke operation for MyOtherLambdaFunction does not match the function specified for the trail. The trail doesn’t log the event.
Type (string) --
The resource type in which you want to log data events. You can specify AWS::S3::Object or AWS::Lambda::Function resources.
Values (list) --
An array of Amazon Resource Name (ARN) strings or partial ARN strings for the specified objects.
To log data events for all objects in all S3 buckets in your AWS account, specify the prefix as arn:aws:s3:::.
To log data events for all objects in an S3 bucket, specify the bucket and an empty object prefix such as arn:aws:s3:::bucket-1/. The trail logs data events for all objects in this S3 bucket.
To log data events for specific objects, specify the S3 bucket and object prefix such as arn:aws:s3:::bucket-1/example-images. The trail logs data events for objects in this S3 bucket that match the prefix.
To log data events for all functions in your AWS account, specify the prefix as arn:aws:lambda.
To log data events for a specific Lambda function, specify the function ARN.
(string) --
ExcludeManagementEventSources (list) --
An optional list of service event sources from which you do not want management events to be logged on your trail. In this release, the list can be empty (disables the filter), or it can filter out AWS Key Management Service events by containing "kms.amazonaws.com". By default, ExcludeManagementEventSources is empty, and AWS KMS events are included in events that are logged to your trail.
(string) --
{'Trail': {'HasInsightSelectors': 'boolean'}}
Returns settings information for a specified trail.
See also: AWS API Documentation
Request Syntax
client.get_trail(
Name='string'
)
string
[REQUIRED]
The name or the Amazon Resource Name (ARN) of the trail for which you want to retrieve settings information.
dict
Response Syntax
{
'Trail': {
'Name': 'string',
'S3BucketName': 'string',
'S3KeyPrefix': 'string',
'SnsTopicName': 'string',
'SnsTopicARN': 'string',
'IncludeGlobalServiceEvents': True|False,
'IsMultiRegionTrail': True|False,
'HomeRegion': 'string',
'TrailARN': 'string',
'LogFileValidationEnabled': True|False,
'CloudWatchLogsLogGroupArn': 'string',
'CloudWatchLogsRoleArn': 'string',
'KmsKeyId': 'string',
'HasCustomEventSelectors': True|False,
'HasInsightSelectors': True|False,
'IsOrganizationTrail': True|False
}
}
Response Structure
(dict) --
Trail (dict) --
The settings for a trail.
Name (string) --
Name of the trail set by calling CreateTrail. The maximum length is 128 characters.
S3BucketName (string) --
Name of the Amazon S3 bucket into which CloudTrail delivers your trail files. See Amazon S3 Bucket Naming Requirements.
S3KeyPrefix (string) --
Specifies the Amazon S3 key prefix that comes after the name of the bucket you have designated for log file delivery. For more information, see Finding Your CloudTrail Log Files.The maximum length is 200 characters.
SnsTopicName (string) --
This field is no longer in use. Use SnsTopicARN.
SnsTopicARN (string) --
Specifies the ARN of the Amazon SNS topic that CloudTrail uses to send notifications when log files are delivered. The format of a topic ARN is:
arn:aws:sns:us-east-2:123456789012:MyTopic
IncludeGlobalServiceEvents (boolean) --
Set to True to include AWS API calls from AWS global services such as IAM. Otherwise, False.
IsMultiRegionTrail (boolean) --
Specifies whether the trail exists only in one region or exists in all regions.
HomeRegion (string) --
The region in which the trail was created.
TrailARN (string) --
Specifies the ARN of the trail. The format of a trail ARN is:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
LogFileValidationEnabled (boolean) --
Specifies whether log file validation is enabled.
CloudWatchLogsLogGroupArn (string) --
Specifies an Amazon Resource Name (ARN), a unique identifier that represents the log group to which CloudTrail logs will be delivered.
CloudWatchLogsRoleArn (string) --
Specifies the role for the CloudWatch Logs endpoint to assume to write to a user's log group.
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the logs delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the format:
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
HasCustomEventSelectors (boolean) --
Specifies if the trail has custom event selectors.
HasInsightSelectors (boolean) --
Specifies whether a trail has insight types specified in an InsightSelector list.
IsOrganizationTrail (boolean) --
Specifies whether the trail is an organization trail.
{'EventCategory': 'insight'}
Looks up management events or CloudTrail Insights events that are captured by CloudTrail. You can look up events that occurred in a region within the last 90 days. Lookup supports the following attributes for management events:
AWS access key
Event ID
Event name
Event source
Read only
Resource name
Resource type
User name
Lookup supports the following attributes for Insights events:
Event ID
Event name
Event source
All attributes are optional. The default number of results returned is 50, with a maximum of 50 possible. The response includes a token that you can use to get the next page of results.
See also: AWS API Documentation
Request Syntax
client.lookup_events(
LookupAttributes=[
{
'AttributeKey': 'EventId'|'EventName'|'ReadOnly'|'Username'|'ResourceType'|'ResourceName'|'EventSource'|'AccessKeyId',
'AttributeValue': 'string'
},
],
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
EventCategory='insight',
MaxResults=123,
NextToken='string'
)
list
Contains a list of lookup attributes. Currently the list can contain only one item.
(dict) --
Specifies an attribute and value that filter the events returned.
AttributeKey (string) -- [REQUIRED]
Specifies an attribute on which to filter the events returned.
AttributeValue (string) -- [REQUIRED]
Specifies a value for the specified AttributeKey.
datetime
Specifies that only events that occur after or at the specified time are returned. If the specified start time is after the specified end time, an error is returned.
datetime
Specifies that only events that occur before or at the specified time are returned. If the specified end time is before the specified start time, an error is returned.
string
Specifies the event category. If you do not specify an event category, events of the category are not returned in the response. For example, if you do not specify insight as the value of EventCategory, no Insights events are returned.
integer
The number of events to return. Possible values are 1 through 50. The default is 50.
string
The token to use to get the next page of results after a previous API call. This token must be passed in with the same parameters that were specified in the the original call. For example, if the original call specified an AttributeKey of 'Username' with a value of 'root', the call with NextToken should include those same parameters.
dict
Response Syntax
{
'Events': [
{
'EventId': 'string',
'EventName': 'string',
'ReadOnly': 'string',
'AccessKeyId': 'string',
'EventTime': datetime(2015, 1, 1),
'EventSource': 'string',
'Username': 'string',
'Resources': [
{
'ResourceType': 'string',
'ResourceName': 'string'
},
],
'CloudTrailEvent': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Contains a response to a LookupEvents action.
Events (list) --
A list of events returned based on the lookup attributes specified and the CloudTrail event. The events list is sorted by time. The most recent event is listed first.
(dict) --
Contains information about an event that was returned by a lookup request. The result includes a representation of a CloudTrail event.
EventId (string) --
The CloudTrail ID of the event returned.
EventName (string) --
The name of the event returned.
ReadOnly (string) --
Information about whether the event is a write event or a read event.
AccessKeyId (string) --
The AWS access key ID that was used to sign the request. If the request was made with temporary security credentials, this is the access key ID of the temporary credentials.
EventTime (datetime) --
The date and time of the event returned.
EventSource (string) --
The AWS service that the request was made to.
Username (string) --
A user name or role name of the requester that called the API in the event returned.
Resources (list) --
A list of resources referenced by the event returned.
(dict) --
Specifies the type and name of a resource referenced by an event.
ResourceType (string) --
The type of a resource referenced by the event returned. When the resource type cannot be determined, null is returned. Some examples of resource types are: Instance for EC2, Trail for CloudTrail, DBInstance for RDS, and AccessKey for IAM. To learn more about how to look up and filter events by the resource types supported for a service, see Filtering CloudTrail Events.
ResourceName (string) --
The name of the resource referenced by the event returned. These are user-created names whose values will depend on the environment. For example, the resource name might be "auto-scaling-test-group" for an Auto Scaling Group or "i-1234567" for an EC2 Instance.
CloudTrailEvent (string) --
A JSON string that contains a representation of the event returned.
NextToken (string) --
The token to use to get the next page of results after a previous API call. If the token does not appear, there are no more results to return. The token must be passed in with the same parameters as the previous call. For example, if the original call specified an AttributeKey of 'Username' with a value of 'root', the call with NextToken should include those same parameters.
{'EventSelectors': {'ExcludeManagementEventSources': ['string']}}
Configures an event selector for your trail. Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events.
When an event occurs in your account, CloudTrail evaluates the event selectors in all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn't match any event selector, the trail doesn't log the event.
Example
You create an event selector for a trail and specify that you want write-only events.
The EC2 GetConsoleOutput and RunInstances API operations occur in your account.
CloudTrail evaluates whether the events match your event selectors.
The RunInstances is a write-only event and it matches your event selector. The trail logs the event.
The GetConsoleOutput is a read-only event but it doesn't match your event selector. The trail doesn't log the event.
The PutEventSelectors operation must be called from the region in which the trail was created; otherwise, an InvalidHomeRegionException is thrown.
You can configure up to five event selectors for each trail. For more information, see Logging Data and Management Events for Trails and Limits in AWS CloudTrail in the AWS CloudTrail User Guide.
See also: AWS API Documentation
Request Syntax
client.put_event_selectors(
TrailName='string',
EventSelectors=[
{
'ReadWriteType': 'ReadOnly'|'WriteOnly'|'All',
'IncludeManagementEvents': True|False,
'DataResources': [
{
'Type': 'string',
'Values': [
'string',
]
},
],
'ExcludeManagementEventSources': [
'string',
]
},
]
)
string
[REQUIRED]
Specifies the name of the trail or trail ARN. If you specify a trail name, the string must meet the following requirements:
Contain only ASCII letters (a-z, A-Z), numbers (0-9), periods (.), underscores (_), or dashes (-)
Start with a letter or number, and end with a letter or number
Be between 3 and 128 characters
Have no adjacent periods, underscores or dashes. Names like my-_namespace and my--namespace are invalid.
Not be in IP address format (for example, 192.168.5.4)
If you specify a trail ARN, it must be in the format:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
list
[REQUIRED]
Specifies the settings for your event selectors. You can configure up to five event selectors for a trail.
(dict) --
Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events. When an event occurs in your account, CloudTrail evaluates the event selector for all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn't match any event selector, the trail doesn't log the event.
You can configure up to five event selectors for a trail.
ReadWriteType (string) --
Specify if you want your trail to log read-only events, write-only events, or all. For example, the EC2 GetConsoleOutput is a read-only API operation and RunInstances is a write-only API operation.
By default, the value is All.
IncludeManagementEvents (boolean) --
Specify if you want your event selector to include management events for your trail.
For more information, see Management Events in the AWS CloudTrail User Guide.
By default, the value is true.
DataResources (list) --
CloudTrail supports data event logging for Amazon S3 objects and AWS Lambda functions. You can specify up to 250 resources for an individual event selector, but the total number of data resources cannot exceed 250 across all event selectors in a trail. This limit does not apply if you configure resource logging for all data events.
For more information, see Data Events and Limits in AWS CloudTrail in the AWS CloudTrail User Guide.
(dict) --
The Amazon S3 buckets or AWS Lambda functions that you specify in your event selectors for your trail to log data events. Data events provide information about the resource operations performed on or within a resource itself. These are also known as data plane operations. You can specify up to 250 data resources for a trail.
The following example demonstrates how logging works when you configure logging of all data events for an S3 bucket named bucket-1. In this example, the CloudTrail user specified an empty prefix, and the option to log both Read and Write data events.
A user uploads an image file to bucket-1.
The PutObject API operation is an Amazon S3 object-level API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified an S3 bucket with an empty prefix, events that occur on any object in that bucket are logged. The trail processes and logs the event.
A user uploads an object to an Amazon S3 bucket named arn:aws:s3:::bucket-2.
The PutObject API operation occurred for an object in an S3 bucket that the CloudTrail user didn't specify for the trail. The trail doesn’t log the event.
The following example demonstrates how logging works when you configure logging of AWS Lambda data events for a Lambda function named MyLambdaFunction, but not for all AWS Lambda functions.
A user runs a script that includes a call to the MyLambdaFunction function and the MyOtherLambdaFunction function.
The Invoke API operation on MyLambdaFunction is an AWS Lambda API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified logging data events for MyLambdaFunction, any invocations of that function are logged. The trail processes and logs the event.
The Invoke API operation on MyOtherLambdaFunction is an AWS Lambda API. Because the CloudTrail user did not specify logging data events for all Lambda functions, the Invoke operation for MyOtherLambdaFunction does not match the function specified for the trail. The trail doesn’t log the event.
Type (string) --
The resource type in which you want to log data events. You can specify AWS::S3::Object or AWS::Lambda::Function resources.
Values (list) --
An array of Amazon Resource Name (ARN) strings or partial ARN strings for the specified objects.
To log data events for all objects in all S3 buckets in your AWS account, specify the prefix as arn:aws:s3:::.
To log data events for all objects in an S3 bucket, specify the bucket and an empty object prefix such as arn:aws:s3:::bucket-1/. The trail logs data events for all objects in this S3 bucket.
To log data events for specific objects, specify the S3 bucket and object prefix such as arn:aws:s3:::bucket-1/example-images. The trail logs data events for objects in this S3 bucket that match the prefix.
To log data events for all functions in your AWS account, specify the prefix as arn:aws:lambda.
To log data events for a specific Lambda function, specify the function ARN.
(string) --
ExcludeManagementEventSources (list) --
An optional list of service event sources from which you do not want management events to be logged on your trail. In this release, the list can be empty (disables the filter), or it can filter out AWS Key Management Service events by containing "kms.amazonaws.com". By default, ExcludeManagementEventSources is empty, and AWS KMS events are included in events that are logged to your trail.
(string) --
dict
Response Syntax
{
'TrailARN': 'string',
'EventSelectors': [
{
'ReadWriteType': 'ReadOnly'|'WriteOnly'|'All',
'IncludeManagementEvents': True|False,
'DataResources': [
{
'Type': 'string',
'Values': [
'string',
]
},
],
'ExcludeManagementEventSources': [
'string',
]
},
]
}
Response Structure
(dict) --
TrailARN (string) --
Specifies the ARN of the trail that was updated with event selectors. The format of a trail ARN is:
arn:aws:cloudtrail:us-east-2:123456789012:trail/MyTrail
EventSelectors (list) --
Specifies the event selectors configured for your trail.
(dict) --
Use event selectors to further specify the management and data event settings for your trail. By default, trails created without specific event selectors will be configured to log all read and write management events, and no data events. When an event occurs in your account, CloudTrail evaluates the event selector for all trails. For each trail, if the event matches any event selector, the trail processes and logs the event. If the event doesn't match any event selector, the trail doesn't log the event.
You can configure up to five event selectors for a trail.
ReadWriteType (string) --
Specify if you want your trail to log read-only events, write-only events, or all. For example, the EC2 GetConsoleOutput is a read-only API operation and RunInstances is a write-only API operation.
By default, the value is All.
IncludeManagementEvents (boolean) --
Specify if you want your event selector to include management events for your trail.
For more information, see Management Events in the AWS CloudTrail User Guide.
By default, the value is true.
DataResources (list) --
CloudTrail supports data event logging for Amazon S3 objects and AWS Lambda functions. You can specify up to 250 resources for an individual event selector, but the total number of data resources cannot exceed 250 across all event selectors in a trail. This limit does not apply if you configure resource logging for all data events.
For more information, see Data Events and Limits in AWS CloudTrail in the AWS CloudTrail User Guide.
(dict) --
The Amazon S3 buckets or AWS Lambda functions that you specify in your event selectors for your trail to log data events. Data events provide information about the resource operations performed on or within a resource itself. These are also known as data plane operations. You can specify up to 250 data resources for a trail.
The following example demonstrates how logging works when you configure logging of all data events for an S3 bucket named bucket-1. In this example, the CloudTrail user specified an empty prefix, and the option to log both Read and Write data events.
A user uploads an image file to bucket-1.
The PutObject API operation is an Amazon S3 object-level API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified an S3 bucket with an empty prefix, events that occur on any object in that bucket are logged. The trail processes and logs the event.
A user uploads an object to an Amazon S3 bucket named arn:aws:s3:::bucket-2.
The PutObject API operation occurred for an object in an S3 bucket that the CloudTrail user didn't specify for the trail. The trail doesn’t log the event.
The following example demonstrates how logging works when you configure logging of AWS Lambda data events for a Lambda function named MyLambdaFunction, but not for all AWS Lambda functions.
A user runs a script that includes a call to the MyLambdaFunction function and the MyOtherLambdaFunction function.
The Invoke API operation on MyLambdaFunction is an AWS Lambda API. It is recorded as a data event in CloudTrail. Because the CloudTrail user specified logging data events for MyLambdaFunction, any invocations of that function are logged. The trail processes and logs the event.
The Invoke API operation on MyOtherLambdaFunction is an AWS Lambda API. Because the CloudTrail user did not specify logging data events for all Lambda functions, the Invoke operation for MyOtherLambdaFunction does not match the function specified for the trail. The trail doesn’t log the event.
Type (string) --
The resource type in which you want to log data events. You can specify AWS::S3::Object or AWS::Lambda::Function resources.
Values (list) --
An array of Amazon Resource Name (ARN) strings or partial ARN strings for the specified objects.
To log data events for all objects in all S3 buckets in your AWS account, specify the prefix as arn:aws:s3:::.
To log data events for all objects in an S3 bucket, specify the bucket and an empty object prefix such as arn:aws:s3:::bucket-1/. The trail logs data events for all objects in this S3 bucket.
To log data events for specific objects, specify the S3 bucket and object prefix such as arn:aws:s3:::bucket-1/example-images. The trail logs data events for objects in this S3 bucket that match the prefix.
To log data events for all functions in your AWS account, specify the prefix as arn:aws:lambda.
To log data events for a specific Lambda function, specify the function ARN.
(string) --
ExcludeManagementEventSources (list) --
An optional list of service event sources from which you do not want management events to be logged on your trail. In this release, the list can be empty (disables the filter), or it can filter out AWS Key Management Service events by containing "kms.amazonaws.com". By default, ExcludeManagementEventSources is empty, and AWS KMS events are included in events that are logged to your trail.
(string) --