2015/05/07 - Amazon Simple Queue Service - 17 new api methods
Adds a permission to a queue for a specific principal. This allows for sharing access to the queue.
When you create a queue, you have full control access rights for the queue. Only you (as owner of the queue) can grant or deny permissions to the queue. For more information about these permissions, see Shared Queues in the Amazon SQS Developer Guide.
Request Syntax
client.add_permission(
QueueUrl='string',
Label='string',
AWSAccountIds=[
'string',
],
Actions=[
'string',
]
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
string
[REQUIRED]
The unique identification of the permission you're setting (e.g., AliceSendMessage). Constraints: Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
list
[REQUIRED]
The AWS account number of the principal who will be given permission. The principal must have an AWS account, but does not need to be signed up for Amazon SQS. For information about locating the AWS account identification, see Your AWS Identifiers in the Amazon SQS Developer Guide.
(string) --
list
[REQUIRED]
The action the client wants to allow for the specified principal. The following are valid values: * | SendMessage | ReceiveMessage | DeleteMessage | ChangeMessageVisibility | GetQueueAttributes | GetQueueUrl. For more information about these actions, see Understanding Permissions in the Amazon SQS Developer Guide.
Specifying SendMessage, DeleteMessage, or ChangeMessageVisibility for the ActionName.n also grants permissions for the corresponding batch versions of those actions: SendMessageBatch, DeleteMessageBatch, and ChangeMessageVisibilityBatch.
(string) --
None
Retrieves one or more messages, with a maximum limit of 10 messages, from the specified queue. Long poll support is enabled by using the WaitTimeSeconds parameter. For more information, see Amazon SQS Long Poll in the Amazon SQS Developer Guide.
Short poll is the default behavior where a weighted random set of machines is sampled on a ReceiveMessage call. This means only the messages on the sampled machines are returned. If the number of messages in the queue is small (less than 1000), it is likely you will get fewer messages than you requested per ReceiveMessage call. If the number of messages in the queue is extremely small, you might not receive any messages in a particular ReceiveMessage response; in which case you should repeat the request.
For each message returned, the response includes the following:
Message body
MD5 digest of the message body. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
Message ID you received when you sent the message to the queue.
Receipt handle.
Message attributes.
MD5 digest of the message attributes.
The receipt handle is the identifier you must provide when deleting the message. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
You can provide the VisibilityTimeout parameter in your request, which will be applied to the messages that Amazon SQS returns in the response. If you do not include the parameter, the overall visibility timeout for the queue is used for the returned messages. For more information, see Visibility Timeout in the Amazon SQS Developer Guide.
Request Syntax
client.receive_message(
QueueUrl='string',
AttributeNames=[
'Policy'|'VisibilityTimeout'|'MaximumMessageSize'|'MessageRetentionPeriod'|'ApproximateNumberOfMessages'|'ApproximateNumberOfMessagesNotVisible'|'CreatedTimestamp'|'LastModifiedTimestamp'|'QueueArn'|'ApproximateNumberOfMessagesDelayed'|'DelaySeconds'|'ReceiveMessageWaitTimeSeconds'|'RedrivePolicy',
],
MessageAttributeNames=[
'string',
],
MaxNumberOfMessages=123,
VisibilityTimeout=123,
WaitTimeSeconds=123
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
list
A list of attributes that need to be returned along with each message.
The following lists the names and descriptions of the attributes that can be returned:
All - returns all values.
ApproximateFirstReceiveTimestamp - returns the time when the message was first received from the queue (epoch time in milliseconds).
ApproximateReceiveCount - returns the number of times a message has been received from the queue but not deleted.
SenderId - returns the AWS account number (or the IP address, if anonymous access is allowed) of the sender.
SentTimestamp - returns the time when the message was sent to the queue (epoch time in milliseconds).
(string) --
list
The name of the message attribute, where N is the index. The message attribute name can contain the following characters: A-Z, a-z, 0-9, underscore (_), hyphen (-), and period (.). The name must not start or end with a period, and it should not have successive periods. The name is case sensitive and must be unique among all attribute names for the message. The name can be up to 256 characters long. The name cannot start with "AWS." or "Amazon." (or any variations in casing), because these prefixes are reserved for use by Amazon Web Services.
When using ReceiveMessage, you can send a list of attribute names to receive, or you can return all of the attributes by specifying "All" or ".*" in your request. You can also use "foo.*" to return all message attributes starting with the "foo" prefix.
(string) --
integer
The maximum number of messages to return. Amazon SQS never returns more messages than this value but may return fewer. Values can be from 1 to 10. Default is 1.
All of the messages are not necessarily returned.
integer
The duration (in seconds) that the received messages are hidden from subsequent retrieve requests after being retrieved by a ReceiveMessage request.
integer
The duration (in seconds) for which the call will wait for a message to arrive in the queue before returning. If a message is available, the call will return sooner than WaitTimeSeconds.
dict
Response Syntax
{
'Messages': [
{
'MessageId': 'string',
'ReceiptHandle': 'string',
'MD5OfBody': 'string',
'Body': 'string',
'Attributes': {
'string': 'string'
},
'MD5OfMessageAttributes': 'string',
'MessageAttributes': {
'string': {
'StringValue': 'string',
'BinaryValue': b'bytes',
'StringListValues': [
'string',
],
'BinaryListValues': [
b'bytes',
],
'DataType': 'string'
}
}
},
]
}
Response Structure
(dict) -- A list of received messages.
Messages (list) --
A list of messages.
(dict) --
An Amazon SQS message.
MessageId (string) --
A unique identifier for the message. Message IDs are considered unique across all AWS accounts for an extended period of time.
ReceiptHandle (string) --
An identifier associated with the act of receiving the message. A new receipt handle is returned every time you receive a message. When deleting a message, you provide the last received receipt handle to delete the message.
MD5OfBody (string) --
An MD5 digest of the non-URL-encoded message body string.
Body (string) --
The message's contents (not URL-encoded).
Attributes (dict) --
SenderId, SentTimestamp, ApproximateReceiveCount, and/or ApproximateFirstReceiveTimestamp. SentTimestamp and ApproximateFirstReceiveTimestamp are each returned as an integer representing the epoch time in milliseconds.
(string) --
The name of a queue attribute.
(string) --
The value of a queue attribute.
MD5OfMessageAttributes (string) --
An MD5 digest of the non-URL-encoded message attribute string. This can be used to verify that Amazon SQS received the message correctly. Amazon SQS first URL decodes the message before creating the MD5 digest. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
MessageAttributes (dict) --
Each message attribute consists of a Name, Type, and Value. For more information, see Message Attribute Items.
(string) --
(dict) --
The user-specified message attribute value. For string data types, the value attribute has the same restrictions on the content as the message body. For more information, see SendMessage.
Name, type, and value must not be empty or null. In addition, the message body should not be empty or null. All parts of the message attribute, including name, type, and value, are included in the message size restriction, which is currently 256 KB (262,144 bytes).
StringValue (string) --
Strings are Unicode with UTF8 binary encoding. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
BinaryValue (bytes) --
Binary type attributes can store any binary data, for example, compressed data, encrypted data, or images.
StringListValues (list) --
Not implemented. Reserved for future use.
(string) --
BinaryListValues (list) --
Not implemented. Reserved for future use.
(bytes) --
DataType (string) --
Amazon SQS supports the following logical data types: String, Number, and Binary. In addition, you can append your own custom labels. For more information, see Message Attribute Data Types.
Revokes any permissions in the queue policy that matches the specified Label parameter. Only the owner of the queue can remove permissions.
Request Syntax
client.remove_permission(
QueueUrl='string',
Label='string'
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
string
[REQUIRED]
The identification of the permission to remove. This is the label added with the AddPermission action.
None
Returns the URL of an existing queue. This action provides a simple way to retrieve the URL of an Amazon SQS queue.
To access a queue that belongs to another AWS account, use the QueueOwnerAWSAccountId parameter to specify the account ID of the queue's owner. The queue's owner must grant you permission to access the queue. For more information about shared queue access, see AddPermission or go to Shared Queues in the Amazon SQS Developer Guide.
Request Syntax
client.get_queue_url(
QueueName='string',
QueueOwnerAWSAccountId='string'
)
string
[REQUIRED]
The name of the queue whose URL must be fetched. Maximum 80 characters; alphanumeric characters, hyphens (-), and underscores (_) are allowed.
string
The AWS account ID of the account that created the queue.
dict
Response Syntax
{
'QueueUrl': 'string'
}
Response Structure
(dict) --
For more information, see Responses in the Amazon SQS Developer Guide.
QueueUrl (string) --
The URL for the queue.
Deletes up to ten messages from the specified queue. This is a batch version of DeleteMessage. The result of the delete action on each message is reported individually in the response.
Request Syntax
client.delete_message_batch(
QueueUrl='string',
Entries=[
{
'Id': 'string',
'ReceiptHandle': 'string'
},
]
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
list
[REQUIRED]
A list of receipt handles for the messages to be deleted.
(dict) --
Encloses a receipt handle and an identifier for it.
Id (string) -- [REQUIRED]
An identifier for this particular receipt handle. This is used to communicate the result. Note that the ``Id``s of a batch request need to be unique within the request.
ReceiptHandle (string) -- [REQUIRED]
A receipt handle.
dict
Response Syntax
{
'Successful': [
{
'Id': 'string'
},
],
'Failed': [
{
'Id': 'string',
'SenderFault': True|False,
'Code': 'string',
'Message': 'string'
},
]
}
Response Structure
(dict) --
For each message in the batch, the response contains a DeleteMessageBatchResultEntry tag if the message is deleted or a BatchResultErrorEntry tag if the message cannot be deleted.
Successful (list) --
A list of DeleteMessageBatchResultEntry items.
(dict) --
Encloses the id an entry in DeleteMessageBatch.
Id (string) --
Represents a successfully deleted message.
Failed (list) --
A list of BatchResultErrorEntry items.
(dict) --
This is used in the responses of batch API to give a detailed description of the result of an action on each entry in the request.
Id (string) --
The id of an entry in a batch request.
SenderFault (boolean) --
Whether the error happened due to the sender's fault.
Code (string) --
An error code representing why the action failed on this entry.
Message (string) --
A message explaining why the action failed on this entry.
Deletes the queue specified by the queue URL, regardless of whether the queue is empty. If the specified queue does not exist, Amazon SQS returns a successful response.
When you delete a queue, the deletion process takes up to 60 seconds. Requests you send involving that queue during the 60 seconds might succeed. For example, a SendMessage request might succeed, but after the 60 seconds, the queue and that message you sent no longer exist. Also, when you delete a queue, you must wait at least 60 seconds before creating a queue with the same name.
We reserve the right to delete queues that have had no activity for more than 30 days. For more information, see How Amazon SQS Queues Work in the Amazon SQS Developer Guide.
Request Syntax
client.delete_queue(
QueueUrl='string'
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
None
Changes the visibility timeout of a specified message in a queue to a new value. The maximum allowed timeout value you can set the value to is 12 hours. This means you can't extend the timeout of a message in an existing queue to more than a total visibility timeout of 12 hours. (For more information visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.)
For example, let's say you have a message and its default message visibility timeout is 30 minutes. You could call ChangeMessageVisiblity with a value of two hours and the effective timeout would be two hours and 30 minutes. When that time comes near you could again extend the time out by calling ChangeMessageVisiblity, but this time the maximum allowed timeout would be 9 hours and 30 minutes.
Request Syntax
client.change_message_visibility(
QueueUrl='string',
ReceiptHandle='string',
VisibilityTimeout=123
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
string
[REQUIRED]
The receipt handle associated with the message whose visibility timeout should be changed. This parameter is returned by the ReceiveMessage action.
integer
[REQUIRED]
The new value (in seconds - from 0 to 43200 - maximum 12 hours) for the message's visibility timeout.
None
Gets attributes for the specified queue. The following attributes are supported:
All - returns all values.
ApproximateNumberOfMessages - returns the approximate number of visible messages in a queue. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide.
ApproximateNumberOfMessagesNotVisible - returns the approximate number of messages that are not timed-out and not deleted. For more information, see Resources Required to Process Messages in the Amazon SQS Developer Guide.
VisibilityTimeout - returns the visibility timeout for the queue. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
CreatedTimestamp - returns the time when the queue was created (epoch time in seconds).
LastModifiedTimestamp - returns the time when the queue was last changed (epoch time in seconds).
Policy - returns the queue's policy.
MaximumMessageSize - returns the limit of how many bytes a message can contain before Amazon SQS rejects it.
MessageRetentionPeriod - returns the number of seconds Amazon SQS retains a message.
QueueArn - returns the queue's Amazon resource name (ARN).
ApproximateNumberOfMessagesDelayed - returns the approximate number of messages that are pending to be added to the queue.
DelaySeconds - returns the default delay on the queue in seconds.
ReceiveMessageWaitTimeSeconds - returns the time for which a ReceiveMessage call will wait for a message to arrive.
RedrivePolicy - returns the parameters for dead letter queue functionality of the source queue. For more information about RedrivePolicy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
Request Syntax
client.get_queue_attributes(
QueueUrl='string',
AttributeNames=[
'Policy'|'VisibilityTimeout'|'MaximumMessageSize'|'MessageRetentionPeriod'|'ApproximateNumberOfMessages'|'ApproximateNumberOfMessagesNotVisible'|'CreatedTimestamp'|'LastModifiedTimestamp'|'QueueArn'|'ApproximateNumberOfMessagesDelayed'|'DelaySeconds'|'ReceiveMessageWaitTimeSeconds'|'RedrivePolicy',
]
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
list
A list of attributes to retrieve information for.
(string) --
dict
Response Syntax
{
'Attributes': {
'string': 'string'
}
}
Response Structure
(dict) -- A list of returned queue attributes.
Attributes (dict) --
A map of attributes to the respective values.
(string) --
The name of a queue attribute.
(string) --
The value of a queue attribute.
Returns a list of your queues that have the RedrivePolicy queue attribute configured with a dead letter queue.
For more information about using dead letter queues, see Using Amazon SQS Dead Letter Queues.
Request Syntax
client.list_dead_letter_source_queues(
QueueUrl='string'
)
string
[REQUIRED] The queue URL of a dead letter queue.
dict
Response Syntax
{
'queueUrls': [
'string',
]
}
Response Structure
(dict) -- A list of your dead letter source queues.
queueUrls (list) -- A list of source queue URLs that have the RedrivePolicy queue attribute configured with a dead letter queue.
(string) --
Delivers up to ten messages to the specified queue. This is a batch version of SendMessage. The result of the send action on each message is reported individually in the response. The maximum allowed individual message size is 256 KB (262,144 bytes).
The maximum total payload size (i.e., the sum of all a batch's individual message lengths) is also 256 KB (262,144 bytes).
If the DelaySeconds parameter is not specified for an entry, the default for the queue is used.
Request Syntax
client.send_message_batch(
QueueUrl='string',
Entries=[
{
'Id': 'string',
'MessageBody': 'string',
'DelaySeconds': 123,
'MessageAttributes': {
'string': {
'StringValue': 'string',
'BinaryValue': b'bytes',
'StringListValues': [
'string',
],
'BinaryListValues': [
b'bytes',
],
'DataType': 'string'
}
}
},
]
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
list
[REQUIRED]
A list of SendMessageBatchRequestEntry items.
(dict) --
Contains the details of a single Amazon SQS message along with a Id.
Id (string) -- [REQUIRED]
An identifier for the message in this batch. This is used to communicate the result. Note that the ``Id``s of a batch request need to be unique within the request.
MessageBody (string) -- [REQUIRED]
Body of the message.
DelaySeconds (integer) --
The number of seconds for which the message has to be delayed.
MessageAttributes (dict) --
Each message attribute consists of a Name, Type, and Value. For more information, see Message Attribute Items.
(string) --
(dict) --
The user-specified message attribute value. For string data types, the value attribute has the same restrictions on the content as the message body. For more information, see SendMessage.
Name, type, and value must not be empty or null. In addition, the message body should not be empty or null. All parts of the message attribute, including name, type, and value, are included in the message size restriction, which is currently 256 KB (262,144 bytes).
StringValue (string) --
Strings are Unicode with UTF8 binary encoding. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
BinaryValue (bytes) --
Binary type attributes can store any binary data, for example, compressed data, encrypted data, or images.
StringListValues (list) --
Not implemented. Reserved for future use.
(string) --
BinaryListValues (list) --
Not implemented. Reserved for future use.
(bytes) --
DataType (string) -- [REQUIRED]
Amazon SQS supports the following logical data types: String, Number, and Binary. In addition, you can append your own custom labels. For more information, see Message Attribute Data Types.
dict
Response Syntax
{
'Successful': [
{
'Id': 'string',
'MessageId': 'string',
'MD5OfMessageBody': 'string',
'MD5OfMessageAttributes': 'string'
},
],
'Failed': [
{
'Id': 'string',
'SenderFault': True|False,
'Code': 'string',
'Message': 'string'
},
]
}
Response Structure
(dict) --
For each message in the batch, the response contains a SendMessageBatchResultEntry tag if the message succeeds or a BatchResultErrorEntry tag if the message fails.
Successful (list) --
A list of SendMessageBatchResultEntry items.
(dict) --
Encloses a message ID for successfully enqueued message of a SendMessageBatch.
Id (string) --
An identifier for the message in this batch.
MessageId (string) --
An identifier for the message.
MD5OfMessageBody (string) --
An MD5 digest of the non-URL-encoded message body string. This can be used to verify that Amazon SQS received the message correctly. Amazon SQS first URL decodes the message before creating the MD5 digest. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
MD5OfMessageAttributes (string) --
An MD5 digest of the non-URL-encoded message attribute string. This can be used to verify that Amazon SQS received the message batch correctly. Amazon SQS first URL decodes the message before creating the MD5 digest. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
Failed (list) --
A list of BatchResultErrorEntry items with the error detail about each message that could not be enqueued.
(dict) --
This is used in the responses of batch API to give a detailed description of the result of an action on each entry in the request.
Id (string) --
The id of an entry in a batch request.
SenderFault (boolean) --
Whether the error happened due to the sender's fault.
Code (string) --
An error code representing why the action failed on this entry.
Message (string) --
A message explaining why the action failed on this entry.
Sets the value of one or more queue attributes. When you change a queue's attributes, the change can take up to 60 seconds for most of the attributes to propagate throughout the SQS system. Changes made to the MessageRetentionPeriod attribute can take up to 15 minutes.
Request Syntax
client.set_queue_attributes(
QueueUrl='string',
Attributes={
'string': 'string'
}
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
dict
[REQUIRED]
A map of attributes to set.
The following lists the names, descriptions, and values of the special request parameters the SetQueueAttributes action uses:
DelaySeconds - The time in seconds that the delivery of all messages in the queue will be delayed. An integer from 0 to 900 (15 minutes). The default for this attribute is 0 (zero).
MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. An integer from 1024 bytes (1 KiB) up to 262144 bytes (256 KiB). The default for this attribute is 262144 (256 KiB).
MessageRetentionPeriod - The number of seconds Amazon SQS retains a message. Integer representing seconds, from 60 (1 minute) to 1209600 (14 days). The default for this attribute is 345600 (4 days).
Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
ReceiveMessageWaitTimeSeconds - The time for which a ReceiveMessage call will wait for a message to arrive. An integer from 0 to 20 (seconds). The default for this attribute is 0.
VisibilityTimeout - The visibility timeout for the queue. An integer from 0 to 43200 (12 hours). The default for this attribute is 30. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
RedrivePolicy - The parameters for dead letter queue functionality of the source queue. For more information about RedrivePolicy and dead letter queues, see Using Amazon SQS Dead Letter Queues in the Amazon SQS Developer Guide.
(string) --
The name of a queue attribute.
(string) --
The value of a queue attribute.
None
Creates a new queue, or returns the URL of an existing one. When you request CreateQueue, you provide a name for the queue. To successfully create a new queue, you must provide a name that is unique within the scope of your own queues.
You may pass one or more attributes in the request. If you do not provide a value for any attribute, the queue will have the default value for that attribute. Permitted attributes are the same that can be set using SetQueueAttributes.
If you provide the name of an existing queue, along with the exact names and values of all the queue's attributes, CreateQueue returns the queue URL for the existing queue. If the queue name, attribute names, or attribute values do not match an existing queue, CreateQueue returns an error.
Request Syntax
client.create_queue(
QueueName='string',
Attributes={
'string': 'string'
}
)
string
[REQUIRED]
The name for the queue to be created.
dict
A map of attributes with their corresponding values.
The following lists the names, descriptions, and values of the special request parameters the CreateQueue action uses:
DelaySeconds - The time in seconds that the delivery of all messages in the queue will be delayed. An integer from 0 to 900 (15 minutes). The default for this attribute is 0 (zero).
MaximumMessageSize - The limit of how many bytes a message can contain before Amazon SQS rejects it. An integer from 1024 bytes (1 KiB) up to 262144 bytes (256 KiB). The default for this attribute is 262144 (256 KiB).
MessageRetentionPeriod - The number of seconds Amazon SQS retains a message. Integer representing seconds, from 60 (1 minute) to 1209600 (14 days). The default for this attribute is 345600 (4 days).
Policy - The queue's policy. A valid AWS policy. For more information about policy structure, see Overview of AWS IAM Policies in the Amazon IAM User Guide.
ReceiveMessageWaitTimeSeconds - The time for which a ReceiveMessage call will wait for a message to arrive. An integer from 0 to 20 (seconds). The default for this attribute is 0.
VisibilityTimeout - The visibility timeout for the queue. An integer from 0 to 43200 (12 hours). The default for this attribute is 30. For more information about visibility timeout, see Visibility Timeout in the Amazon SQS Developer Guide.
(string) --
The name of a queue attribute.
(string) --
The value of a queue attribute.
dict
Response Syntax
{
'QueueUrl': 'string'
}
Response Structure
(dict) --
Returns the QueueUrl element of the created queue.
QueueUrl (string) --
The URL for the created Amazon SQS queue.
Delivers a message to the specified queue. With Amazon SQS, you now have the ability to send large payload messages that are up to 256KB (262,144 bytes) in size. To send large payloads, you must use an AWS SDK that supports SigV4 signing. To verify whether SigV4 is supported for an AWS SDK, check the SDK release notes.
Request Syntax
client.send_message(
QueueUrl='string',
MessageBody='string',
DelaySeconds=123,
MessageAttributes={
'string': {
'StringValue': 'string',
'BinaryValue': b'bytes',
'StringListValues': [
'string',
],
'BinaryListValues': [
b'bytes',
],
'DataType': 'string'
}
}
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
string
[REQUIRED]
The message to send. String maximum 256 KB in size. For a list of allowed characters, see the preceding important note.
integer
The number of seconds (0 to 900 - 15 minutes) to delay a specific message. Messages with a positive DelaySeconds value become available for processing after the delay time is finished. If you don't specify a value, the default value for the queue applies.
dict
Each message attribute consists of a Name, Type, and Value. For more information, see Message Attribute Items.
(string) --
(dict) --
The user-specified message attribute value. For string data types, the value attribute has the same restrictions on the content as the message body. For more information, see SendMessage.
Name, type, and value must not be empty or null. In addition, the message body should not be empty or null. All parts of the message attribute, including name, type, and value, are included in the message size restriction, which is currently 256 KB (262,144 bytes).
StringValue (string) --
Strings are Unicode with UTF8 binary encoding. For a list of code values, see http://en.wikipedia.org/wiki/ASCII#ASCII_printable_characters.
BinaryValue (bytes) --
Binary type attributes can store any binary data, for example, compressed data, encrypted data, or images.
StringListValues (list) --
Not implemented. Reserved for future use.
(string) --
BinaryListValues (list) --
Not implemented. Reserved for future use.
(bytes) --
DataType (string) -- [REQUIRED]
Amazon SQS supports the following logical data types: String, Number, and Binary. In addition, you can append your own custom labels. For more information, see Message Attribute Data Types.
dict
Response Syntax
{
'MD5OfMessageBody': 'string',
'MD5OfMessageAttributes': 'string',
'MessageId': 'string'
}
Response Structure
(dict) --
The MD5OfMessageBody and MessageId elements.
MD5OfMessageBody (string) --
An MD5 digest of the non-URL-encoded message body string. This can be used to verify that Amazon SQS received the message correctly. Amazon SQS first URL decodes the message before creating the MD5 digest. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
MD5OfMessageAttributes (string) --
An MD5 digest of the non-URL-encoded message attribute string. This can be used to verify that Amazon SQS received the message correctly. Amazon SQS first URL decodes the message before creating the MD5 digest. For information about MD5, go to http://www.faqs.org/rfcs/rfc1321.html.
MessageId (string) --
An element containing the message ID of the message sent to the queue. For more information, see Queue and Message Identifiers in the Amazon SQS Developer Guide.
Deletes the specified message from the specified queue. You specify the message by using the message's receipt handle and not the message ID you received when you sent the message. Even if the message is locked by another reader due to the visibility timeout setting, it is still deleted from the queue. If you leave a message in the queue for longer than the queue's configured retention period, Amazon SQS automatically deletes it.
Request Syntax
client.delete_message(
QueueUrl='string',
ReceiptHandle='string'
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
string
[REQUIRED]
The receipt handle associated with the message to delete.
None
Returns a list of your queues. The maximum number of queues that can be returned is 1000. If you specify a value for the optional QueueNamePrefix parameter, only queues with a name beginning with the specified value are returned.
Request Syntax
client.list_queues(
QueueNamePrefix='string'
)
string
A string to use for filtering the list results. Only those queues whose name begins with the specified string are returned.
dict
Response Syntax
{
'QueueUrls': [
'string',
]
}
Response Structure
(dict) -- A list of your queues.
QueueUrls (list) --
A list of queue URLs, up to 1000 entries.
(string) --
Deletes the messages in a queue specified by the queue URL.
When you purge a queue, the message deletion process takes up to 60 seconds. All messages sent to the queue before calling PurgeQueue will be deleted; messages sent to the queue while it is being purged may be deleted. While the queue is being purged, messages sent to the queue before PurgeQueue was called may be received, but will be deleted within the next minute.
Request Syntax
client.purge_queue(
QueueUrl='string'
)
string
[REQUIRED]
The queue URL of the queue to delete the messages from when using the PurgeQueue API.
None
Changes the visibility timeout of multiple messages. This is a batch version of ChangeMessageVisibility. The result of the action on each message is reported individually in the response. You can send up to 10 ChangeMessageVisibility requests with each ChangeMessageVisibilityBatch action.
Request Syntax
client.change_message_visibility_batch(
QueueUrl='string',
Entries=[
{
'Id': 'string',
'ReceiptHandle': 'string',
'VisibilityTimeout': 123
},
]
)
string
[REQUIRED]
The URL of the Amazon SQS queue to take action on.
list
[REQUIRED]
A list of receipt handles of the messages for which the visibility timeout must be changed.
(dict) --
Encloses a receipt handle and an entry id for each message in ChangeMessageVisibilityBatch.
&ChangeMessageVisibilityBatchRequestEntry.1.Id=change_visibility_msg_2
&ChangeMessageVisibilityBatchRequestEntry.1.ReceiptHandle=Your_Receipt_Handle
&ChangeMessageVisibilityBatchRequestEntry.1.VisibilityTimeout=45
Id (string) -- [REQUIRED]
An identifier for this particular receipt handle. This is used to communicate the result. Note that the ``Id``s of a batch request need to be unique within the request.
ReceiptHandle (string) -- [REQUIRED]
A receipt handle.
VisibilityTimeout (integer) --
The new value (in seconds) for the message's visibility timeout.
dict
Response Syntax
{
'Successful': [
{
'Id': 'string'
},
],
'Failed': [
{
'Id': 'string',
'SenderFault': True|False,
'Code': 'string',
'Message': 'string'
},
]
}
Response Structure
(dict) --
For each message in the batch, the response contains a ChangeMessageVisibilityBatchResultEntry tag if the message succeeds or a BatchResultErrorEntry tag if the message fails.
Successful (list) --
A list of ChangeMessageVisibilityBatchResultEntry items.
(dict) --
Encloses the id of an entry in ChangeMessageVisibilityBatch.
Id (string) --
Represents a message whose visibility timeout has been changed successfully.
Failed (list) --
A list of BatchResultErrorEntry items.
(dict) --
This is used in the responses of batch API to give a detailed description of the result of an action on each entry in the request.
Id (string) --
The id of an entry in a batch request.
SenderFault (boolean) --
Whether the error happened due to the sender's fault.
Code (string) --
An error code representing why the action failed on this entry.
Message (string) --
A message explaining why the action failed on this entry.