2021/11/30 - Amazon Simple Storage Service - 20 updated api methods
Changes Introduce Amazon S3 Glacier Instant Retrieval storage class and a new setting in S3 Object Ownership to disable ACLs for bucket and the objects in it.
{'StorageClass': {'GLACIER_IR'}}
Creates a copy of an object that is already stored in Amazon S3.
All copy requests must be authenticated. Additionally, you must have read access to the source object and write access to the destination bucket. For more information, see REST Authentication. Both the Region that you want to copy the object from and the Region that you want to copy the object to must be enabled for your account.
A copy request might return an error when Amazon S3 receives the copy request or while Amazon S3 is copying the files. If the error occurs before the copy action starts, you receive a standard Amazon S3 error. If the error occurs during the copy operation, the error response is embedded in the 200 OK response. This means that a 200 OK response can contain either a success or an error. Design your application to parse the contents of the response and handle it appropriately.
If the copy is successful, you receive a response with information about the copied object.
The copy request charge is based on the storage class and Region that you specify for the destination object. For pricing information, see Amazon S3 pricing.
Metadata
When copying an object, you can preserve all metadata (default) or specify new metadata. However, the ACL is not preserved and is set to private for the user making the request. To override the default ACL setting, specify a new ACL when generating a copy request. For more information, see Using ACLs.
To specify whether you want the object metadata copied from the source object or replaced with metadata provided in the request, you can optionally add the x-amz-metadata-directive header. When you grant permissions, you can use the s3:x-amz-metadata-directive condition key to enforce certain metadata behavior when objects are uploaded. For more information, see Specifying Conditions in a Policy in the Amazon S3 User Guide. For a complete list of Amazon S3-specific condition keys, see Actions, Resources, and Condition Keys for Amazon S3.
x-amz-copy-source-if Headers
To only copy an object under certain conditions, such as whether the Etag matches or whether the object was modified before or after a specified date, use the following request parameters:
x-amz-copy-source-if-match
x-amz-copy-source-if-none-match
x-amz-copy-source-if-unmodified-since
x-amz-copy-source-if-modified-since
If both the x-amz-copy-source-if-match and x-amz-copy-source-if-unmodified-since headers are present in the request and evaluate as follows, Amazon S3 returns 200 OK and copies the data:
x-amz-copy-source-if-match condition evaluates to true
x-amz-copy-source-if-unmodified-since condition evaluates to false
If both the x-amz-copy-source-if-none-match and x-amz-copy-source-if-modified-since headers are present in the request and evaluate as follows, Amazon S3 returns the 412 Precondition Failed response code:
x-amz-copy-source-if-none-match condition evaluates to false
x-amz-copy-source-if-modified-since condition evaluates to true
Server-side encryption
When you perform a CopyObject operation, you can optionally use the appropriate encryption-related headers to encrypt the object using server-side encryption with Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS) or a customer-provided encryption key. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. For more information about server-side encryption, see Using Server-Side Encryption.
If a target object uses SSE-KMS, you can enable an S3 Bucket Key for the object. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
Access Control List (ACL)-Specific Request Headers
When copying an object, you can optionally use headers to grant ACL-based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
If the bucket that you're copying objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format.
For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
Storage Class Options
You can use the CopyObject action to change the storage class of an object that is already stored in Amazon S3 using the StorageClass parameter. For more information, see Storage Classes in the Amazon S3 User Guide.
Versioning
By default, x-amz-copy-source identifies the current version of an object to copy. If the current version is a delete marker, Amazon S3 behaves as if the object was deleted. To copy a different version, use the versionId subresource.
If you enable versioning on the target bucket, Amazon S3 generates a unique version ID for the object being copied. This version ID is different from the version ID of the source object. Amazon S3 returns the version ID of the copied object in the x-amz-version-id response header in the response.
If you do not enable versioning or suspend it on the target bucket, the version ID that Amazon S3 generates is always null.
If the source object's storage class is GLACIER, you must restore a copy of this object before you can use it as a source object for the copy operation. For more information, see RestoreObject.
The following operations are related to CopyObject:
For more information, see Copying Objects.
See also: AWS API Documentation
Request Syntax
client.copy_object(
ACL='private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
Bucket='string',
CacheControl='string',
ContentDisposition='string',
ContentEncoding='string',
ContentLanguage='string',
ContentType='string',
CopySource='string',
CopySourceIfMatch='string',
CopySourceIfModifiedSince=datetime(2015, 1, 1),
CopySourceIfNoneMatch='string',
CopySourceIfUnmodifiedSince=datetime(2015, 1, 1),
Expires=datetime(2015, 1, 1),
GrantFullControl='string',
GrantRead='string',
GrantReadACP='string',
GrantWriteACP='string',
Key='string',
Metadata={
'string': 'string'
},
MetadataDirective='COPY'|'REPLACE',
TaggingDirective='COPY'|'REPLACE',
ServerSideEncryption='AES256'|'aws:kms',
StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
WebsiteRedirectLocation='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSECustomerKeyMD5='string',
SSEKMSKeyId='string',
SSEKMSEncryptionContext='string',
BucketKeyEnabled=True|False,
CopySourceSSECustomerAlgorithm='string',
CopySourceSSECustomerKey='string',
CopySourceSSECustomerKeyMD5='string',
RequestPayer='requester',
Tagging='string',
ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
ObjectLockRetainUntilDate=datetime(2015, 1, 1),
ObjectLockLegalHoldStatus='ON'|'OFF',
ExpectedBucketOwner='string',
ExpectedSourceBucketOwner='string'
)
string
The canned ACL to apply to the object.
This action is not supported by Amazon S3 on Outposts.
string
[REQUIRED]
The name of the destination bucket.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Specifies caching behavior along the request/reply chain.
string
Specifies presentational information for the object.
string
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
string
The language the content is in.
string
A standard MIME type describing the format of the object data.
string
[REQUIRED]
Specifies the source object for the copy operation. You specify the value in one of two formats, depending on whether you want to access the source object through an access point:
For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL encoded.
For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3:<Region>:<account-id>:accesspoint/<access-point-name>/object/<key>. For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.
To copy a specific version of an object, append ?versionId=<version-id> to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.
string
Copies the object if its entity tag (ETag) matches the specified tag.
datetime
Copies the object if it has been modified since the specified time.
string
Copies the object if its entity tag (ETag) is different than the specified ETag.
datetime
Copies the object if it hasn't been modified since the specified time.
datetime
The date and time at which the object is no longer cacheable.
string
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
string
[REQUIRED]
The key of the destination object.
dict
A map of metadata to store with the object in S3.
(string) --
(string) --
string
Specifies whether the metadata is copied from the source object or replaced with metadata provided in the request.
string
Specifies whether the object tag-set are copied from the source object or replaced with tag-set provided in the request.
string
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
string
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
string
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
string
Specifies the algorithm to use to when encrypting the object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
Specifies the Amazon Web Services KMS key ID to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
string
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
boolean
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.
string
Specifies the algorithm to use when decrypting the source object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
string
The tag-set for the object destination object this value must be used in conjunction with the TaggingDirective. The tag-set must be encoded as URL Query parameters.
string
The Object Lock mode that you want to apply to the copied object.
datetime
The date and time when you want the copied object's Object Lock to expire.
string
Specifies whether you want to apply a Legal Hold to the copied object.
string
The account ID of the expected destination bucket owner. If the destination bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
string
The account ID of the expected source bucket owner. If the source bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'CopyObjectResult': {
'ETag': 'string',
'LastModified': datetime(2015, 1, 1)
},
'Expiration': 'string',
'CopySourceVersionId': 'string',
'VersionId': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'SSEKMSEncryptionContext': 'string',
'BucketKeyEnabled': True|False,
'RequestCharged': 'requester'
}
Response Structure
(dict) --
CopyObjectResult (dict) --
Container for all response elements.
ETag (string) --
Returns the ETag of the new object. The ETag reflects only changes to the contents of an object, not its metadata.
LastModified (datetime) --
Creation date of the object.
Expiration (string) --
If the object expiration is configured, the response includes this header.
CopySourceVersionId (string) --
Version of the copied object in the destination bucket.
VersionId (string) --
Version ID of the newly created copy.
ServerSideEncryption (string) --
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
SSEKMSEncryptionContext (string) --
If present, specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
BucketKeyEnabled (boolean) --
Indicates whether the copied object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
{'ObjectOwnership': 'BucketOwnerPreferred | ObjectWriter | BucketOwnerEnforced'}
Creates a new S3 bucket. To create a bucket, you must register with Amazon S3 and have a valid Amazon Web Services Access Key ID to authenticate requests. Anonymous requests are never allowed to create buckets. By creating the bucket, you become the bucket owner.
Not every string is an acceptable bucket name. For information about bucket naming restrictions, see Bucket naming rules.
If you want to create an Amazon S3 on Outposts bucket, see Create Bucket.
By default, the bucket is created in the US East (N. Virginia) Region. You can optionally specify a Region in the request body. You might choose a Region to optimize latency, minimize costs, or address regulatory requirements. For example, if you reside in Europe, you will probably find it advantageous to create buckets in the Europe (Ireland) Region. For more information, see Accessing a bucket.
Access control lists (ACLs)
When creating a bucket using this operation, you can optionally configure the bucket ACL to specify the accounts or groups that should be granted specific permissions on the bucket.
There are two ways to grant the appropriate permissions using the request headers.
Specify a canned ACL using the x-amz-acl request header. Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.
Specify access permissions explicitly using the x-amz-grant-read, x-amz-grant-write, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These headers map to the set of permissions Amazon S3 supports in an ACL. For more information, see Access control list (ACL) overview. You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an Amazon Web Services account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an Amazon Web Services account
For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
Permissions
In addition to s3:CreateBucket, the following permissions are required when your CreateBucket includes specific headers:
ACLs - If your CreateBucket request specifies ACL permissions and the ACL is public-read, public-read-write, authenticated-read, or if you specify access permissions explicitly through any other ACL, both s3:CreateBucket and s3:PutBucketAcl permissions are needed. If the ACL the CreateBucket request is private or doesn't specify any ACLs, only s3:CreateBucket permission is needed.
Object Lock - If ObjectLockEnabledForBucket is set to true in your CreateBucket request, s3:PutBucketObjectLockConfiguration and s3:PutBucketVersioning permissions are required.
S3 Object Ownership - If your CreateBucket request includes the the x-amz-object-ownership header, s3:PutBucketOwnershipControls permission is required.
The following operations are related to CreateBucket:
See also: AWS API Documentation
Request Syntax
client.create_bucket(
ACL='private'|'public-read'|'public-read-write'|'authenticated-read',
Bucket='string',
CreateBucketConfiguration={
'LocationConstraint': 'af-south-1'|'ap-east-1'|'ap-northeast-1'|'ap-northeast-2'|'ap-northeast-3'|'ap-south-1'|'ap-southeast-1'|'ap-southeast-2'|'ca-central-1'|'cn-north-1'|'cn-northwest-1'|'EU'|'eu-central-1'|'eu-north-1'|'eu-south-1'|'eu-west-1'|'eu-west-2'|'eu-west-3'|'me-south-1'|'sa-east-1'|'us-east-2'|'us-gov-east-1'|'us-gov-west-1'|'us-west-1'|'us-west-2'
},
GrantFullControl='string',
GrantRead='string',
GrantReadACP='string',
GrantWrite='string',
GrantWriteACP='string',
ObjectLockEnabledForBucket=True|False,
ObjectOwnership='BucketOwnerPreferred'|'ObjectWriter'|'BucketOwnerEnforced'
)
string
The canned ACL to apply to the bucket.
string
[REQUIRED]
The name of the bucket to create.
dict
The configuration information for the bucket.
LocationConstraint (string) --
Specifies the Region where the bucket will be created. If you don't specify a Region, the bucket is created in the US East (N. Virginia) Region (us-east-1).
string
Allows grantee the read, write, read ACP, and write ACP permissions on the bucket.
string
Allows grantee to list the objects in the bucket.
string
Allows grantee to read the bucket ACL.
string
Allows grantee to create new objects in the bucket.
For the bucket and object owners of existing objects, also allows deletions and overwrites of those objects.
string
Allows grantee to write the ACL for the applicable bucket.
boolean
Specifies whether you want S3 Object Lock to be enabled for the new bucket.
string
The container element for object ownership for a bucket's ownership controls.
BucketOwnerPreferred - Objects uploaded to the bucket change ownership to the bucket owner if the objects are uploaded with the bucket-owner-full-control canned ACL.
ObjectWriter - The uploading account will own the object if the object is uploaded with the bucket-owner-full-control canned ACL.
BucketOwnerEnforced - Access control lists (ACLs) are disabled and no longer affect permissions. The bucket owner automatically owns and has full control over every object in the bucket. The bucket only accepts PUT requests that don't specify an ACL or bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format.
dict
Response Syntax
{
'Location': 'string'
}
Response Structure
(dict) --
Location (string) --
Specifies the Region where the bucket will be created. If you are creating a bucket on the US East (N. Virginia) Region (us-east-1), you do not need to specify the location.
{'StorageClass': {'GLACIER_IR'}}
This action initiates a multipart upload and returns an upload ID. This upload ID is used to associate all of the parts in the specific multipart upload. You specify this upload ID in each of your subsequent upload part requests (see UploadPart). You also include this upload ID in the final request to either complete or abort the multipart upload request.
For more information about multipart uploads, see Multipart Upload Overview.
If you have configured a lifecycle rule to abort incomplete multipart uploads, the upload must complete within the number of days specified in the bucket lifecycle configuration. Otherwise, the incomplete multipart upload becomes eligible for an abort action and Amazon S3 aborts the multipart upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy.
For information about the permissions required to use the multipart upload API, see Multipart Upload and Permissions.
For request signing, multipart upload is just a series of regular requests. You initiate a multipart upload, send one or more requests to upload parts, and then complete the multipart upload process. You sign each request individually. There is nothing special about signing multipart upload requests. For more information about signing, see Authenticating Requests (Amazon Web Services Signature Version 4).
You can optionally request server-side encryption. For server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. You can provide your own encryption key, or use Amazon Web Services KMS keys or Amazon S3-managed encryption keys. If you choose to provide your own encryption key, the request headers you provide in UploadPart and UploadPartCopy requests must match the headers you used in the request to initiate the upload by using CreateMultipartUpload.
To perform a multipart upload with encryption using an Amazon Web Services KMS key, the requester must have permission to the kms:Decrypt and kms:GenerateDataKey* actions on the key. These permissions are required because Amazon S3 must decrypt and read data from the encrypted file parts before it completes the multipart upload. For more information, see Multipart upload API and permissions in the Amazon S3 User Guide.
If your Identity and Access Management (IAM) user or role is in the same Amazon Web Services account as the KMS key, then you must have these permissions on the key policy. If your IAM user or role belongs to a different account than the key, then you must have the permissions on both the key policy and your IAM user or role.
For more information, see Protecting Data Using Server-Side Encryption.
Access Permissions
When copying an object, you can optionally specify the accounts or groups that should be granted specific permissions on the new object. There are two ways to grant the permissions using the request headers:
Specify a canned ACL with the x-amz-acl request header. For more information, see Canned ACL.
Specify access permissions explicitly with the x-amz-grant-read, x-amz-grant-read-acp, x-amz-grant-write-acp, and x-amz-grant-full-control headers. These parameters map to the set of permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview.
You can use either a canned ACL or specify access permissions explicitly. You cannot do both.
Server-Side- Encryption-Specific Request Headers
You can optionally tell Amazon S3 to encrypt data at rest using server-side encryption. Server-side encryption is for data encryption at rest. Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts it when you access it. The option you use depends on whether you want to use Amazon Web Services managed encryption keys or provide your own encryption key.
Use encryption keys managed by Amazon S3 or customer managed key stored in Amazon Web Services Key Management Service (Amazon Web Services KMS) – If you want Amazon Web Services to manage the keys used to encrypt data, specify the following headers in the request.
x-amz-server-side-encryption
x-amz-server-side-encryption-aws-kms-key-id
x-amz-server-side-encryption-context
For more information about server-side encryption with KMS key (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.
Use customer-provided encryption keys – If you want to manage your own encryption keys, provide all the following headers in the request.
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about server-side encryption with KMS keys (SSE-KMS), see Protecting Data Using Server-Side Encryption with KMS keys.
Access-Control-List (ACL)-Specific Request Headers
You also can use the following access control–related headers with this operation. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the access control list (ACL) on the object. For more information, see Using ACLs. With this operation, you can grant access permissions using one of the following two methods:
Specify a canned ACL ( x-amz-acl) — Amazon S3 supports a set of predefined ACLs, known as canned ACLs. Each canned ACL has a predefined set of grantees and permissions. For more information, see Canned ACL.
Specify access permissions explicitly — To explicitly grant access permissions to specific Amazon Web Services accounts or groups, use the following headers. Each header maps to specific permissions that Amazon S3 supports in an ACL. For more information, see Access Control List (ACL) Overview. In the header, you specify a list of grantees who get the specific permission. To grant permissions explicitly, use:
x-amz-grant-read
x-amz-grant-write
x-amz-grant-read-acp
x-amz-grant-write-acp
x-amz-grant-full-control
You specify each grantee as a type=value pair, where the type is one of the following:
id – if the value specified is the canonical user ID of an Amazon Web Services account
uri – if you are granting permissions to a predefined group
emailAddress – if the value specified is the email address of an Amazon Web Services account
For example, the following x-amz-grant-read header grants the Amazon Web Services accounts identified by account IDs permissions to read object data and its metadata:
x-amz-grant-read: id="11112222333", id="444455556666"
The following operations are related to CreateMultipartUpload:
See also: AWS API Documentation
Request Syntax
client.create_multipart_upload(
ACL='private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
Bucket='string',
CacheControl='string',
ContentDisposition='string',
ContentEncoding='string',
ContentLanguage='string',
ContentType='string',
Expires=datetime(2015, 1, 1),
GrantFullControl='string',
GrantRead='string',
GrantReadACP='string',
GrantWriteACP='string',
Key='string',
Metadata={
'string': 'string'
},
ServerSideEncryption='AES256'|'aws:kms',
StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
WebsiteRedirectLocation='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSECustomerKeyMD5='string',
SSEKMSKeyId='string',
SSEKMSEncryptionContext='string',
BucketKeyEnabled=True|False,
RequestPayer='requester',
Tagging='string',
ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
ObjectLockRetainUntilDate=datetime(2015, 1, 1),
ObjectLockLegalHoldStatus='ON'|'OFF',
ExpectedBucketOwner='string'
)
string
The canned ACL to apply to the object.
This action is not supported by Amazon S3 on Outposts.
string
[REQUIRED]
The name of the bucket to which to initiate the upload
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Specifies caching behavior along the request/reply chain.
string
Specifies presentational information for the object.
string
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
string
The language the content is in.
string
A standard MIME type describing the format of the object data.
datetime
The date and time at which the object is no longer cacheable.
string
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
string
[REQUIRED]
Object key for which the multipart upload is to be initiated.
dict
A map of metadata to store with the object in S3.
(string) --
(string) --
string
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
string
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
string
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
string
Specifies the algorithm to use to when encrypting the object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
Specifies the ID of the symmetric customer managed key to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.
string
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
boolean
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with an object action doesn’t affect bucket-level settings for S3 Bucket Key.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
string
The tag-set for the object. The tag-set must be encoded as URL Query parameters.
string
Specifies the Object Lock mode that you want to apply to the uploaded object.
datetime
Specifies the date and time when you want the Object Lock to expire.
string
Specifies whether you want to apply a Legal Hold to the uploaded object.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'AbortDate': datetime(2015, 1, 1),
'AbortRuleId': 'string',
'Bucket': 'string',
'Key': 'string',
'UploadId': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'SSEKMSEncryptionContext': 'string',
'BucketKeyEnabled': True|False,
'RequestCharged': 'requester'
}
Response Structure
(dict) --
AbortDate (datetime) --
If the bucket has a lifecycle rule configured with an action to abort incomplete multipart uploads and the prefix in the lifecycle rule matches the object name in the request, the response includes this header. The header indicates when the initiated multipart upload becomes eligible for an abort operation. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy.
The response also includes the x-amz-abort-rule-id header that provides the ID of the lifecycle configuration rule that defines this action.
AbortRuleId (string) --
This header is returned along with the x-amz-abort-date header. It identifies the applicable lifecycle configuration rule that defines the action to abort incomplete multipart uploads.
Bucket (string) --
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
Key (string) --
Object key for which the multipart upload was initiated.
UploadId (string) --
ID for the initiated multipart upload.
ServerSideEncryption (string) --
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
SSEKMSEncryptionContext (string) --
If present, specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
BucketKeyEnabled (boolean) --
Indicates whether the multipart upload uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
{'Rules': {'NoncurrentVersionTransition': {'StorageClass': {'GLACIER_IR'}},
'Transition': {'StorageClass': {'GLACIER_IR'}}}}
Returns the lifecycle configuration information set on the bucket. For information about lifecycle configuration, see Object Lifecycle Management.
To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration action. The bucket owner has this permission by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
GetBucketLifecycle has the following special error:
Error code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
The following operations are related to GetBucketLifecycle:
See also: AWS API Documentation
Request Syntax
client.get_bucket_lifecycle(
Bucket='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket for which to get the lifecycle information.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'Rules': [
{
'Expiration': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'ExpiredObjectDeleteMarker': True|False
},
'ID': 'string',
'Prefix': 'string',
'Status': 'Enabled'|'Disabled',
'Transition': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR'
},
'NoncurrentVersionTransition': {
'NoncurrentDays': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR',
'NewerNoncurrentVersions': 123
},
'NoncurrentVersionExpiration': {
'NoncurrentDays': 123,
'NewerNoncurrentVersions': 123
},
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
}
},
]
}
Response Structure
(dict) --
Rules (list) --
Container for a lifecycle rule.
(dict) --
Specifies lifecycle rules for an Amazon S3 bucket. For more information, see Put Bucket Lifecycle Configuration in the Amazon S3 API Reference. For examples, see Put Bucket Lifecycle Configuration Examples.
Expiration (dict) --
Specifies the expiration for the lifecycle of the object.
Date (datetime) --
Indicates at what date the object is to be moved or deleted. Should be in GMT ISO 8601 Format.
Days (integer) --
Indicates the lifetime, in days, of the objects that are subject to the rule. The value must be a non-zero positive integer.
ExpiredObjectDeleteMarker (boolean) --
Indicates whether Amazon S3 will remove a delete marker with no noncurrent versions. If set to true, the delete marker will be expired; if set to false the policy takes no action. This cannot be specified with Days or Date in a Lifecycle Expiration Policy.
ID (string) --
Unique identifier for the rule. The value can't be longer than 255 characters.
Prefix (string) --
Object key prefix that identifies one or more objects to which this rule applies.
Status (string) --
If Enabled, the rule is currently being applied. If Disabled, the rule is not currently being applied.
Transition (dict) --
Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon S3 User Guide.
Date (datetime) --
Indicates when objects are transitioned to the specified storage class. The date value must be in ISO 8601 format. The time is always midnight UTC.
Days (integer) --
Indicates the number of days after creation when objects are transitioned to the specified storage class. The value must be a positive integer.
StorageClass (string) --
The storage class to which you want the object to transition.
NoncurrentVersionTransition (dict) --
Container for the transition rule that describes when noncurrent objects transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates How Long an Object Has Been Noncurrent in the Amazon S3 User Guide.
StorageClass (string) --
The class of storage used to store the object.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
NoncurrentVersionExpiration (dict) --
Specifies when noncurrent object versions expire. Upon expiration, Amazon S3 permanently deletes the noncurrent object versions. You set this lifecycle configuration action on a bucket that has versioning enabled (or suspended) to request that Amazon S3 delete noncurrent object versions at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates When an Object Became Noncurrent in the Amazon S3 User Guide.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
AbortIncompleteMultipartUpload (dict) --
Specifies the days since the initiation of an incomplete multipart upload that Amazon S3 will wait before permanently removing all parts of the upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy in the Amazon S3 User Guide.
DaysAfterInitiation (integer) --
Specifies the number of days after which Amazon S3 aborts an incomplete multipart upload.
{'Rules': {'NoncurrentVersionTransitions': {'StorageClass': {'GLACIER_IR'}},
'Transitions': {'StorageClass': {'GLACIER_IR'}}}}
Returns the lifecycle configuration information set on the bucket. For information about lifecycle configuration, see Object Lifecycle Management.
To use this operation, you must have permission to perform the s3:GetLifecycleConfiguration action. The bucket owner has this permission, by default. The bucket owner can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
GetBucketLifecycleConfiguration has the following special error:
Error code: NoSuchLifecycleConfiguration
Description: The lifecycle configuration does not exist.
HTTP Status Code: 404 Not Found
SOAP Fault Code Prefix: Client
The following operations are related to GetBucketLifecycleConfiguration:
See also: AWS API Documentation
Request Syntax
client.get_bucket_lifecycle_configuration(
Bucket='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket for which to get the lifecycle information.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'Rules': [
{
'Expiration': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'ExpiredObjectDeleteMarker': True|False
},
'ID': 'string',
'Prefix': 'string',
'Filter': {
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'ObjectSizeGreaterThan': 123,
'ObjectSizeLessThan': 123,
'And': {
'Prefix': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ObjectSizeGreaterThan': 123,
'ObjectSizeLessThan': 123
}
},
'Status': 'Enabled'|'Disabled',
'Transitions': [
{
'Date': datetime(2015, 1, 1),
'Days': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR'
},
],
'NoncurrentVersionTransitions': [
{
'NoncurrentDays': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR',
'NewerNoncurrentVersions': 123
},
],
'NoncurrentVersionExpiration': {
'NoncurrentDays': 123,
'NewerNoncurrentVersions': 123
},
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
}
},
]
}
Response Structure
(dict) --
Rules (list) --
Container for a lifecycle rule.
(dict) --
A lifecycle rule for individual objects in an Amazon S3 bucket.
Expiration (dict) --
Specifies the expiration for the lifecycle of the object in the form of date, days and, whether the object has a delete marker.
Date (datetime) --
Indicates at what date the object is to be moved or deleted. Should be in GMT ISO 8601 Format.
Days (integer) --
Indicates the lifetime, in days, of the objects that are subject to the rule. The value must be a non-zero positive integer.
ExpiredObjectDeleteMarker (boolean) --
Indicates whether Amazon S3 will remove a delete marker with no noncurrent versions. If set to true, the delete marker will be expired; if set to false the policy takes no action. This cannot be specified with Days or Date in a Lifecycle Expiration Policy.
ID (string) --
Unique identifier for the rule. The value cannot be longer than 255 characters.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies. This is no longer used; use Filter instead.
Filter (dict) --
The Filter is used to identify objects that a Lifecycle Rule applies to. A Filter must have exactly one of Prefix, Tag, or And specified. Filter is required if the LifecycleRule does not containt a Prefix element.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies.
Tag (dict) --
This tag must exist in the object's tag set in order for the rule to apply.
Key (string) --
Name of the object key.
Value (string) --
Value of the tag.
ObjectSizeGreaterThan (integer) --
Minimum object size to which the rule applies.
ObjectSizeLessThan (integer) --
Maximum object size to which the rule applies.
And (dict) --
This is used in a Lifecycle Rule Filter to apply a logical AND to two or more predicates. The Lifecycle Rule will apply to any object matching all of the predicates configured inside the And operator.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies.
Tags (list) --
All of these tags must exist in the object's tag set in order for the rule to apply.
(dict) --
A container of a key value name pair.
Key (string) --
Name of the object key.
Value (string) --
Value of the tag.
ObjectSizeGreaterThan (integer) --
Minimum object size to which the rule applies.
ObjectSizeLessThan (integer) --
Maximum object size to which the rule applies.
Status (string) --
If 'Enabled', the rule is currently being applied. If 'Disabled', the rule is not currently being applied.
Transitions (list) --
Specifies when an Amazon S3 object transitions to a specified storage class.
(dict) --
Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon S3 User Guide.
Date (datetime) --
Indicates when objects are transitioned to the specified storage class. The date value must be in ISO 8601 format. The time is always midnight UTC.
Days (integer) --
Indicates the number of days after creation when objects are transitioned to the specified storage class. The value must be a positive integer.
StorageClass (string) --
The storage class to which you want the object to transition.
NoncurrentVersionTransitions (list) --
Specifies the transition rule for the lifecycle rule that describes when noncurrent objects transition to a specific storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to a specific storage class at a set period in the object's lifetime.
(dict) --
Container for the transition rule that describes when noncurrent objects transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates How Long an Object Has Been Noncurrent in the Amazon S3 User Guide.
StorageClass (string) --
The class of storage used to store the object.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
NoncurrentVersionExpiration (dict) --
Specifies when noncurrent object versions expire. Upon expiration, Amazon S3 permanently deletes the noncurrent object versions. You set this lifecycle configuration action on a bucket that has versioning enabled (or suspended) to request that Amazon S3 delete noncurrent object versions at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates When an Object Became Noncurrent in the Amazon S3 User Guide.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
AbortIncompleteMultipartUpload (dict) --
Specifies the days since the initiation of an incomplete multipart upload that Amazon S3 will wait before permanently removing all parts of the upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy in the Amazon S3 User Guide.
DaysAfterInitiation (integer) --
Specifies the number of days after which Amazon S3 aborts an incomplete multipart upload.
{'OwnershipControls': {'Rules': {'ObjectOwnership': {'BucketOwnerEnforced'}}}}
Retrieves OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:GetBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.
For information about Amazon S3 Object Ownership, see Using Object Ownership.
The following operations are related to GetBucketOwnershipControls:
PutBucketOwnershipControls
DeleteBucketOwnershipControls
See also: AWS API Documentation
Request Syntax
client.get_bucket_ownership_controls(
Bucket='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the Amazon S3 bucket whose OwnershipControls you want to retrieve.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'OwnershipControls': {
'Rules': [
{
'ObjectOwnership': 'BucketOwnerPreferred'|'ObjectWriter'|'BucketOwnerEnforced'
},
]
}
}
Response Structure
(dict) --
OwnershipControls (dict) --
The OwnershipControls (BucketOwnerEnforced, BucketOwnerPreferred, or ObjectWriter) currently in effect for this Amazon S3 bucket.
Rules (list) --
The container element for an ownership control rule.
(dict) --
The container element for an ownership control rule.
ObjectOwnership (string) --
The container element for object ownership for a bucket's ownership controls.
BucketOwnerPreferred - Objects uploaded to the bucket change ownership to the bucket owner if the objects are uploaded with the bucket-owner-full-control canned ACL.
ObjectWriter - The uploading account will own the object if the object is uploaded with the bucket-owner-full-control canned ACL.
BucketOwnerEnforced - Access control lists (ACLs) are disabled and no longer affect permissions. The bucket owner automatically owns and has full control over every object in the bucket. The bucket only accepts PUT requests that don't specify an ACL or bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format.
{'ReplicationConfiguration': {'Rules': {'Destination': {'StorageClass': {'GLACIER_IR'}}}}}
Returns the replication configuration of a bucket.
For information about replication configuration, see Replication in the Amazon S3 User Guide.
This action requires permissions for the s3:GetReplicationConfiguration action. For more information about permissions, see Using Bucket Policies and User Policies.
If you include the Filter element in a replication configuration, you must also include the DeleteMarkerReplication and Priority elements. The response also returns those elements.
For information about GetBucketReplication errors, see List of replication-related error codes
The following operations are related to GetBucketReplication:
See also: AWS API Documentation
Request Syntax
client.get_bucket_replication(
Bucket='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The bucket name for which to get the replication information.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'ReplicationConfiguration': {
'Role': 'string',
'Rules': [
{
'ID': 'string',
'Priority': 123,
'Prefix': 'string',
'Filter': {
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'And': {
'Prefix': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
},
'Status': 'Enabled'|'Disabled',
'SourceSelectionCriteria': {
'SseKmsEncryptedObjects': {
'Status': 'Enabled'|'Disabled'
},
'ReplicaModifications': {
'Status': 'Enabled'|'Disabled'
}
},
'ExistingObjectReplication': {
'Status': 'Enabled'|'Disabled'
},
'Destination': {
'Bucket': 'string',
'Account': 'string',
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'AccessControlTranslation': {
'Owner': 'Destination'
},
'EncryptionConfiguration': {
'ReplicaKmsKeyID': 'string'
},
'ReplicationTime': {
'Status': 'Enabled'|'Disabled',
'Time': {
'Minutes': 123
}
},
'Metrics': {
'Status': 'Enabled'|'Disabled',
'EventThreshold': {
'Minutes': 123
}
}
},
'DeleteMarkerReplication': {
'Status': 'Enabled'|'Disabled'
}
},
]
}
}
Response Structure
(dict) --
ReplicationConfiguration (dict) --
A container for replication rules. You can add up to 1,000 rules. The maximum size of a replication configuration is 2 MB.
Role (string) --
The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that Amazon S3 assumes when replicating objects. For more information, see How to Set Up Replication in the Amazon S3 User Guide.
Rules (list) --
A container for one or more replication rules. A replication configuration must have at least one rule and can contain a maximum of 1,000 rules.
(dict) --
Specifies which Amazon S3 objects to replicate and where to store the replicas.
ID (string) --
A unique identifier for the rule. The maximum value is 255 characters.
Priority (integer) --
The priority indicates which rule has precedence whenever two or more replication rules conflict. Amazon S3 will attempt to replicate objects according to all replication rules. However, if there are two or more rules with the same destination bucket, then objects will be replicated according to the rule with the highest priority. The higher the number, the higher the priority.
For more information, see Replication in the Amazon S3 User Guide.
Prefix (string) --
An object key name prefix that identifies the object or objects to which the rule applies. The maximum prefix length is 1,024 characters. To include all objects in a bucket, specify an empty string.
Filter (dict) --
A filter that identifies the subset of objects to which the replication rule applies. A Filter must specify exactly one Prefix, Tag, or an And child element.
Prefix (string) --
An object key name prefix that identifies the subset of objects to which the rule applies.
Tag (dict) --
A container for specifying a tag key and value.
The rule applies only to objects that have the tag in their tag set.
Key (string) --
Name of the object key.
Value (string) --
Value of the tag.
And (dict) --
A container for specifying rule filters. The filters determine the subset of objects to which the rule applies. This element is required only if you specify more than one filter. For example:
If you specify both a Prefix and a Tag filter, wrap these filters in an And tag.
If you specify a filter based on multiple tags, wrap the Tag elements in an And tag.
Prefix (string) --
An object key name prefix that identifies the subset of objects to which the rule applies.
Tags (list) --
An array of tags containing key and value pairs.
(dict) --
A container of a key value name pair.
Key (string) --
Name of the object key.
Value (string) --
Value of the tag.
Status (string) --
Specifies whether the rule is enabled.
SourceSelectionCriteria (dict) --
A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
SseKmsEncryptedObjects (dict) --
A container for filter information for the selection of Amazon S3 objects encrypted with Amazon Web Services KMS. If you include SourceSelectionCriteria in the replication configuration, this element is required.
Status (string) --
Specifies whether Amazon S3 replicates objects created with server-side encryption using an Amazon Web Services KMS key stored in Amazon Web Services Key Management Service.
ReplicaModifications (dict) --
A filter that you can specify for selections for modifications on replicas. Amazon S3 doesn't replicate replica modifications by default. In the latest version of replication configuration (when Filter is specified), you can specify this element and set the status to Enabled to replicate modifications on replicas.
Status (string) --
Specifies whether Amazon S3 replicates modifications on replicas.
ExistingObjectReplication (dict) --
Status (string) --
Destination (dict) --
A container for information about the replication destination and its configurations including enabling the S3 Replication Time Control (S3 RTC).
Bucket (string) --
The Amazon Resource Name (ARN) of the bucket where you want Amazon S3 to store the results.
Account (string) --
Destination bucket owner account ID. In a cross-account scenario, if you direct Amazon S3 to change replica ownership to the Amazon Web Services account that owns the destination bucket by specifying the AccessControlTranslation property, this is the account ID of the destination bucket owner. For more information, see Replication Additional Configuration: Changing the Replica Owner in the Amazon S3 User Guide.
StorageClass (string) --
The storage class to use when replicating objects, such as S3 Standard or reduced redundancy. By default, Amazon S3 uses the storage class of the source object to create the object replica.
For valid values, see the StorageClass element of the PUT Bucket replication action in the Amazon S3 API Reference.
AccessControlTranslation (dict) --
Specify this only in a cross-account scenario (where source and destination bucket owners are not the same), and you want to change replica ownership to the Amazon Web Services account that owns the destination bucket. If this is not specified in the replication configuration, the replicas are owned by same Amazon Web Services account that owns the source object.
Owner (string) --
Specifies the replica ownership. For default and valid values, see PUT bucket replication in the Amazon S3 API Reference.
EncryptionConfiguration (dict) --
A container that provides information about encryption. If SourceSelectionCriteria is specified, you must specify this element.
ReplicaKmsKeyID (string) --
Specifies the ID (Key ARN or Alias ARN) of the customer managed Amazon Web Services KMS key stored in Amazon Web Services Key Management Service (KMS) for the destination bucket. Amazon S3 uses this key to encrypt replica objects. Amazon S3 only supports symmetric, customer managed KMS keys. For more information, see Using symmetric and asymmetric keys in the Amazon Web Services Key Management Service Developer Guide.
ReplicationTime (dict) --
A container specifying S3 Replication Time Control (S3 RTC), including whether S3 RTC is enabled and the time when all objects and operations on objects must be replicated. Must be specified together with a Metrics block.
Status (string) --
Specifies whether the replication time is enabled.
Time (dict) --
A container specifying the time by which replication should be complete for all objects and operations on objects.
Minutes (integer) --
Contains an integer specifying time in minutes.
Valid value: 15
Metrics (dict) --
A container specifying replication metrics-related settings enabling replication metrics and events.
Status (string) --
Specifies whether the replication metrics are enabled.
EventThreshold (dict) --
A container specifying the time threshold for emitting the s3:Replication:OperationMissedThreshold event.
Minutes (integer) --
Contains an integer specifying time in minutes.
Valid value: 15
DeleteMarkerReplication (dict) --
Specifies whether Amazon S3 replicates delete markers. If you specify a Filter in your replication configuration, you must also include a DeleteMarkerReplication element. If your Filter includes a Tag element, the DeleteMarkerReplication Status must be set to Disabled, because Amazon S3 does not support replicating delete markers for tag-based rules. For an example configuration, see Basic Rule Configuration.
For more information about delete marker replication, see Basic Rule Configuration.
Status (string) --
Indicates whether to replicate delete markers.
{'StorageClass': {'GLACIER_IR'}}
Retrieves objects from Amazon S3. To use GET, you must have READ access to the object. If you grant READ access to the anonymous user, you can return the object without using an authorization header.
An Amazon S3 bucket has no directory hierarchy such as you would find in a typical computer file system. You can, however, create a logical hierarchy by using object key names that imply a folder structure. For example, instead of naming an object sample.jpg, you can name it photos/2006/February/sample.jpg.
To get an object from such a logical hierarchy, specify the full key name for the object in the GET operation. For a virtual hosted-style request example, if you have the object photos/2006/February/sample.jpg, specify the resource as /photos/2006/February/sample.jpg. For a path-style request example, if you have the object photos/2006/February/sample.jpg in the bucket named examplebucket, specify the resource as /examplebucket/photos/2006/February/sample.jpg. For more information about request types, see HTTP Host Header Bucket Specification.
To distribute large files to many people, you can save bandwidth costs by using BitTorrent. For more information, see Amazon S3 Torrent. For more information about returning the ACL of an object, see GetObjectAcl.
If the object you are retrieving is stored in the S3 Glacier or S3 Glacier Deep Archive storage class, or S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers, before you can retrieve the object you must first restore a copy using RestoreObject. Otherwise, this action returns an InvalidObjectStateError error. For information about restoring archived objects, see Restoring Archived Objects.
Encryption request headers, like x-amz-server-side-encryption, should not be sent for GET requests if your object uses server-side encryption with KMS keys (SSE-KMS) or server-side encryption with Amazon S3–managed encryption keys (SSE-S3). If your object does use these types of keys, you’ll get an HTTP 400 BadRequest error.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you GET the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Assuming you have the relevant permission to read object tags, the response also returns the x-amz-tagging-count header that provides the count of number of tags associated with the object. You can use GetObjectTagging to retrieve the tag set associated with an object.
Permissions
You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 will return an HTTP status code 404 ("no such key") error.
If you don’t have the s3:ListBucket permission, Amazon S3 will return an HTTP status code 403 ("access denied") error.
Versioning
By default, the GET action returns the current version of an object. To return a different version, use the versionId subresource.
For more information about versioning, see PutBucketVersioning.
Overriding Response Header Values
There are times when you want to override certain response header values in a GET response. For example, you might override the Content-Disposition response header value in your GET request.
You can override values for a set of response headers using the following query parameters. These response header values are sent only on a successful request, that is, when status code 200 OK is returned. The set of headers you can override using these parameters is a subset of the headers that Amazon S3 accepts when you create an object. The response headers that you can override for the GET response are Content-Type, Content-Language, Expires, Cache-Control, Content-Disposition, and Content-Encoding. To override these header values in the GET response, you use the following request parameters.
response-content-type
response-content-language
response-expires
response-cache-control
response-content-disposition
response-content-encoding
Additional Considerations about Request Headers
If both of the If-Match and If-Unmodified-Since headers are present in the request as follows: If-Match condition evaluates to true, and; If-Unmodified-Since condition evaluates to false; then, S3 returns 200 OK and the data requested.
If both of the If-None-Match and If-Modified-Since headers are present in the request as follows: `` If-None-Match`` condition evaluates to false, and; If-Modified-Since condition evaluates to true; then, S3 returns 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
The following operations are related to GetObject:
See also: AWS API Documentation
Request Syntax
client.get_object(
Bucket='string',
IfMatch='string',
IfModifiedSince=datetime(2015, 1, 1),
IfNoneMatch='string',
IfUnmodifiedSince=datetime(2015, 1, 1),
Key='string',
Range='string',
ResponseCacheControl='string',
ResponseContentDisposition='string',
ResponseContentEncoding='string',
ResponseContentLanguage='string',
ResponseContentType='string',
ResponseExpires=datetime(2015, 1, 1),
VersionId='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSECustomerKeyMD5='string',
RequestPayer='requester',
PartNumber=123,
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The bucket name containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using an Object Lambda access point the hostname takes the form AccessPointName-AccountId.s3-object-lambda.*Region*.amazonaws.com.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Return the object only if its entity tag (ETag) is the same as the one specified, otherwise return a 412 (precondition failed).
datetime
Return the object only if it has been modified since the specified time, otherwise return a 304 (not modified).
string
Return the object only if its entity tag (ETag) is different from the one specified, otherwise return a 304 (not modified).
datetime
Return the object only if it has not been modified since the specified time, otherwise return a 412 (precondition failed).
string
[REQUIRED]
Key of the object to get.
string
Downloads the specified range bytes of an object. For more information about the HTTP Range header, see https://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35.
string
Sets the Cache-Control header of the response.
string
Sets the Content-Disposition header of the response
string
Sets the Content-Encoding header of the response.
string
Sets the Content-Language header of the response.
string
Sets the Content-Type header of the response.
datetime
Sets the Expires header of the response.
string
VersionId used to reference a specific version of the object.
string
Specifies the algorithm to use to when decrypting the object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 used to encrypt the data. This value is used to decrypt the object when recovering it and must match the one used when storing the data. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
integer
Part number of the object being read. This is a positive integer between 1 and 10,000. Effectively performs a 'ranged' GET request for the part specified. Useful for downloading just a part of an object.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'Body': StreamingBody(),
'DeleteMarker': True|False,
'AcceptRanges': 'string',
'Expiration': 'string',
'Restore': 'string',
'LastModified': datetime(2015, 1, 1),
'ContentLength': 123,
'ETag': 'string',
'MissingMeta': 123,
'VersionId': 'string',
'CacheControl': 'string',
'ContentDisposition': 'string',
'ContentEncoding': 'string',
'ContentLanguage': 'string',
'ContentRange': 'string',
'ContentType': 'string',
'Expires': datetime(2015, 1, 1),
'WebsiteRedirectLocation': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'Metadata': {
'string': 'string'
},
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'BucketKeyEnabled': True|False,
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'RequestCharged': 'requester',
'ReplicationStatus': 'COMPLETE'|'PENDING'|'FAILED'|'REPLICA',
'PartsCount': 123,
'TagCount': 123,
'ObjectLockMode': 'GOVERNANCE'|'COMPLIANCE',
'ObjectLockRetainUntilDate': datetime(2015, 1, 1),
'ObjectLockLegalHoldStatus': 'ON'|'OFF'
}
Response Structure
(dict) --
Body (:class:`.StreamingBody`) --
Object data.
DeleteMarker (boolean) --
Specifies whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.
AcceptRanges (string) --
Indicates that a range of bytes was specified.
Expiration (string) --
If the object expiration is configured (see PUT Bucket lifecycle), the response includes this header. It includes the expiry-date and rule-id key-value pairs providing object expiration information. The value of the rule-id is URL encoded.
Restore (string) --
Provides information about object restoration action and expiration time of the restored object copy.
LastModified (datetime) --
Creation date of the object.
ContentLength (integer) --
Size of the body in bytes.
ETag (string) --
An ETag is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.
MissingMeta (integer) --
This is set to the number of metadata entries not returned in x-amz-meta headers. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.
VersionId (string) --
Version of the object.
CacheControl (string) --
Specifies caching behavior along the request/reply chain.
ContentDisposition (string) --
Specifies presentational information for the object.
ContentEncoding (string) --
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
ContentLanguage (string) --
The language the content is in.
ContentRange (string) --
The portion of the object returned in the response.
ContentType (string) --
A standard MIME type describing the format of the object data.
Expires (datetime) --
The date and time at which the object is no longer cacheable.
WebsiteRedirectLocation (string) --
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
ServerSideEncryption (string) --
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
Metadata (dict) --
A map of metadata to store with the object in S3.
(string) --
(string) --
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
BucketKeyEnabled (boolean) --
Indicates whether the object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
StorageClass (string) --
Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
ReplicationStatus (string) --
Amazon S3 can return this if your request involves a bucket that is either a source or destination in a replication rule.
PartsCount (integer) --
The count of parts this object has.
TagCount (integer) --
The number of tags, if any, on the object.
ObjectLockMode (string) --
The Object Lock mode currently in place for this object.
ObjectLockRetainUntilDate (datetime) --
The date and time when this object's Object Lock will expire.
ObjectLockLegalHoldStatus (string) --
Indicates whether this object has an active legal hold. This field is only returned if you have permission to view an object's legal hold status.
{'StorageClass': {'GLACIER_IR'}}
The HEAD action retrieves metadata from an object without returning the object itself. This action is useful if you're only interested in an object's metadata. To use HEAD, you must have READ access to the object.
A HEAD request has the same options as a GET action on an object. The response is identical to the GET response except that there is no response body. Because of this, if the HEAD request generates an error, it returns a generic 404 Not Found or 403 Forbidden code. It is not possible to retrieve the exact exception beyond these error codes.
If you encrypt an object by using server-side encryption with customer-provided encryption keys (SSE-C) when you store the object in Amazon S3, then when you retrieve the metadata from the object, you must use the following headers:
x-amz-server-side-encryption-customer-algorithm
x-amz-server-side-encryption-customer-key
x-amz-server-side-encryption-customer-key-MD5
For more information about SSE-C, see Server-Side Encryption (Using Customer-Provided Encryption Keys).
Request headers are limited to 8 KB in size. For more information, see Common Request Headers.
Consider the following when using request headers:
Consideration 1 – If both of the If-Match and If-Unmodified-Since headers are present in the request as follows:
If-Match condition evaluates to true, and;
If-Unmodified-Since condition evaluates to false;
Then Amazon S3 returns 200 OK and the data requested.
Consideration 2 – If both of the If-None-Match and If-Modified-Since headers are present in the request as follows:
If-None-Match condition evaluates to false, and;
If-Modified-Since condition evaluates to true;
Then Amazon S3 returns the 304 Not Modified response code.
For more information about conditional requests, see RFC 7232.
Permissions
You need the relevant read object (or version) permission for this operation. For more information, see Specifying Permissions in a Policy. If the object you request does not exist, the error Amazon S3 returns depends on whether you also have the s3:ListBucket permission.
If you have the s3:ListBucket permission on the bucket, Amazon S3 returns an HTTP status code 404 ("no such key") error.
If you don’t have the s3:ListBucket permission, Amazon S3 returns an HTTP status code 403 ("access denied") error.
The following action is related to HeadObject:
See also: AWS API Documentation
Request Syntax
client.head_object(
Bucket='string',
IfMatch='string',
IfModifiedSince=datetime(2015, 1, 1),
IfNoneMatch='string',
IfUnmodifiedSince=datetime(2015, 1, 1),
Key='string',
Range='string',
VersionId='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSECustomerKeyMD5='string',
RequestPayer='requester',
PartNumber=123,
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket containing the object.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Return the object only if its entity tag (ETag) is the same as the one specified, otherwise return a 412 (precondition failed).
datetime
Return the object only if it has been modified since the specified time, otherwise return a 304 (not modified).
string
Return the object only if its entity tag (ETag) is different from the one specified, otherwise return a 304 (not modified).
datetime
Return the object only if it has not been modified since the specified time, otherwise return a 412 (precondition failed).
string
[REQUIRED]
The object key.
string
Downloads the specified range bytes of an object. For more information about the HTTP Range header, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.35.
string
VersionId used to reference a specific version of the object.
string
Specifies the algorithm to use to when encrypting the object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
integer
Part number of the object being read. This is a positive integer between 1 and 10,000. Effectively performs a 'ranged' HEAD request for the part specified. Useful querying about the size of the part and the number of parts in this object.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'DeleteMarker': True|False,
'AcceptRanges': 'string',
'Expiration': 'string',
'Restore': 'string',
'ArchiveStatus': 'ARCHIVE_ACCESS'|'DEEP_ARCHIVE_ACCESS',
'LastModified': datetime(2015, 1, 1),
'ContentLength': 123,
'ETag': 'string',
'MissingMeta': 123,
'VersionId': 'string',
'CacheControl': 'string',
'ContentDisposition': 'string',
'ContentEncoding': 'string',
'ContentLanguage': 'string',
'ContentType': 'string',
'Expires': datetime(2015, 1, 1),
'WebsiteRedirectLocation': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'Metadata': {
'string': 'string'
},
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'BucketKeyEnabled': True|False,
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'RequestCharged': 'requester',
'ReplicationStatus': 'COMPLETE'|'PENDING'|'FAILED'|'REPLICA',
'PartsCount': 123,
'ObjectLockMode': 'GOVERNANCE'|'COMPLIANCE',
'ObjectLockRetainUntilDate': datetime(2015, 1, 1),
'ObjectLockLegalHoldStatus': 'ON'|'OFF'
}
Response Structure
(dict) --
DeleteMarker (boolean) --
Specifies whether the object retrieved was (true) or was not (false) a Delete Marker. If false, this response header does not appear in the response.
AcceptRanges (string) --
Indicates that a range of bytes was specified.
Expiration (string) --
If the object expiration is configured (see PUT Bucket lifecycle), the response includes this header. It includes the expiry-date and rule-id key-value pairs providing object expiration information. The value of the rule-id is URL encoded.
Restore (string) --
If the object is an archived object (an object whose storage class is GLACIER), the response includes this header if either the archive restoration is in progress (see RestoreObject or an archive copy is already restored.
If an archive copy is already restored, the header value indicates when Amazon S3 is scheduled to delete the object copy. For example:
x-amz-restore: ongoing-request="false", expiry-date="Fri, 21 Dec 2012 00:00:00 GMT"
If the object restoration is in progress, the header returns the value ongoing-request="true".
For more information about archiving objects, see Transitioning Objects: General Considerations.
ArchiveStatus (string) --
The archive state of the head object.
LastModified (datetime) --
Creation date of the object.
ContentLength (integer) --
Size of the body in bytes.
ETag (string) --
An ETag is an opaque identifier assigned by a web server to a specific version of a resource found at a URL.
MissingMeta (integer) --
This is set to the number of metadata entries not returned in x-amz-meta headers. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.
VersionId (string) --
Version of the object.
CacheControl (string) --
Specifies caching behavior along the request/reply chain.
ContentDisposition (string) --
Specifies presentational information for the object.
ContentEncoding (string) --
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
ContentLanguage (string) --
The language the content is in.
ContentType (string) --
A standard MIME type describing the format of the object data.
Expires (datetime) --
The date and time at which the object is no longer cacheable.
WebsiteRedirectLocation (string) --
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.
ServerSideEncryption (string) --
If the object is stored using server-side encryption either with an Amazon Web Services KMS key or an Amazon S3-managed encryption key, the response includes this header with the value of the server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
Metadata (dict) --
A map of metadata to store with the object in S3.
(string) --
(string) --
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
BucketKeyEnabled (boolean) --
Indicates whether the object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
StorageClass (string) --
Provides storage class information of the object. Amazon S3 returns this header for all objects except for S3 Standard storage class objects.
For more information, see Storage Classes.
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
ReplicationStatus (string) --
Amazon S3 can return this header if your request involves a bucket that is either a source or a destination in a replication rule.
In replication, you have a source bucket on which you configure replication and destination bucket or buckets where Amazon S3 stores object replicas. When you request an object ( GetObject) or object metadata ( HeadObject) from these buckets, Amazon S3 will return the x-amz-replication-status header in the response as follows:
If requesting an object from the source bucket — Amazon S3 will return the x-amz-replication-status header if the object in your request is eligible for replication. For example, suppose that in your replication configuration, you specify object prefix TaxDocs requesting Amazon S3 to replicate objects with key prefix TaxDocs. Any objects you upload with this key name prefix, for example TaxDocs/document1.pdf, are eligible for replication. For any object request with this key name prefix, Amazon S3 will return the x-amz-replication-status header with value PENDING, COMPLETED or FAILED indicating object replication status.
If requesting an object from a destination bucket — Amazon S3 will return the x-amz-replication-status header with value REPLICA if the object in your request is a replica that Amazon S3 created and there is no replica modification replication in progress.
When replicating objects to multiple destination buckets the x-amz-replication-status header acts differently. The header of the source object will only return a value of COMPLETED when replication is successful to all destinations. The header will remain at value PENDING until replication has completed for all destinations. If one or more destinations fails replication the header will return FAILED.
For more information, see Replication.
PartsCount (integer) --
The count of parts this object has.
ObjectLockMode (string) --
The Object Lock mode, if any, that's in effect for this object. This header is only returned if the requester has the s3:GetObjectRetention permission. For more information about S3 Object Lock, see Object Lock.
ObjectLockRetainUntilDate (datetime) --
The date and time when the Object Lock retention period expires. This header is only returned if the requester has the s3:GetObjectRetention permission.
ObjectLockLegalHoldStatus (string) --
Specifies whether a legal hold is in effect for this object. This header is only returned if the requester has the s3:GetObjectLegalHold permission. This header is not returned if the specified version of this object has never had a legal hold applied. For more information about S3 Object Lock, see Object Lock.
{'Uploads': {'StorageClass': {'GLACIER_IR'}}}
This action lists in-progress multipart uploads. An in-progress multipart upload is a multipart upload that has been initiated using the Initiate Multipart Upload request, but has not yet been completed or aborted.
This action returns at most 1,000 multipart uploads in the response. 1,000 multipart uploads is the maximum number of uploads a response can include, which is also the default value. You can further limit the number of uploads in a response by specifying the max-uploads parameter in the response. If additional multipart uploads satisfy the list criteria, the response will contain an IsTruncated element with the value true. To list the additional multipart uploads, use the key-marker and upload-id-marker request parameters.
In the response, the uploads are sorted by key. If your application has initiated more than one multipart upload using the same object key, then uploads in the response are first sorted by key. Additionally, uploads are sorted in ascending order within each key by the upload initiation time.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload and Permissions.
The following operations are related to ListMultipartUploads:
See also: AWS API Documentation
Request Syntax
client.list_multipart_uploads(
Bucket='string',
Delimiter='string',
EncodingType='url',
KeyMarker='string',
MaxUploads=123,
Prefix='string',
UploadIdMarker='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket to which the multipart upload was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Character you use to group keys.
All keys that contain the same string between the prefix, if specified, and the first occurrence of the delimiter after the prefix are grouped under a single result element, CommonPrefixes. If you don't specify the prefix parameter, then the substring starts at the beginning of the key. The keys that are grouped under CommonPrefixes result element are not returned elsewhere in the response.
string
Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key may contain any Unicode character; however, XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.
string
Together with upload-id-marker, this parameter specifies the multipart upload after which listing should begin.
If upload-id-marker is not specified, only the keys lexicographically greater than the specified key-marker will be included in the list.
If upload-id-marker is specified, any multipart uploads for a key equal to the key-marker might also be included, provided those multipart uploads have upload IDs lexicographically greater than the specified upload-id-marker.
integer
Sets the maximum number of multipart uploads, from 1 to 1,000, to return in the response body. 1,000 is the maximum number of uploads that can be returned in a response.
string
Lists in-progress uploads only for those keys that begin with the specified prefix. You can use prefixes to separate a bucket into different grouping of keys. (You can think of using prefix to make groups in the same way you'd use a folder in a file system.)
string
Together with key-marker, specifies the multipart upload after which listing should begin. If key-marker is not specified, the upload-id-marker parameter is ignored. Otherwise, any multipart uploads for a key equal to the key-marker might be included in the list only if they have an upload ID lexicographically greater than the specified upload-id-marker.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'Bucket': 'string',
'KeyMarker': 'string',
'UploadIdMarker': 'string',
'NextKeyMarker': 'string',
'Prefix': 'string',
'Delimiter': 'string',
'NextUploadIdMarker': 'string',
'MaxUploads': 123,
'IsTruncated': True|False,
'Uploads': [
{
'UploadId': 'string',
'Key': 'string',
'Initiated': datetime(2015, 1, 1),
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'Owner': {
'DisplayName': 'string',
'ID': 'string'
},
'Initiator': {
'ID': 'string',
'DisplayName': 'string'
}
},
],
'CommonPrefixes': [
{
'Prefix': 'string'
},
],
'EncodingType': 'url'
}
Response Structure
(dict) --
Bucket (string) --
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
KeyMarker (string) --
The key at or after which the listing began.
UploadIdMarker (string) --
Upload ID after which listing began.
NextKeyMarker (string) --
When a list is truncated, this element specifies the value that should be used for the key-marker request parameter in a subsequent request.
Prefix (string) --
When a prefix is provided in the request, this field contains the specified prefix. The result contains only keys starting with the specified prefix.
Delimiter (string) --
Contains the delimiter you specified in the request. If you don't specify a delimiter in your request, this element is absent from the response.
NextUploadIdMarker (string) --
When a list is truncated, this element specifies the value that should be used for the upload-id-marker request parameter in a subsequent request.
MaxUploads (integer) --
Maximum number of multipart uploads that could have been included in the response.
IsTruncated (boolean) --
Indicates whether the returned list of multipart uploads is truncated. A value of true indicates that the list was truncated. The list can be truncated if the number of multipart uploads exceeds the limit allowed or specified by max uploads.
Uploads (list) --
Container for elements related to a particular multipart upload. A response can contain zero or more Upload elements.
(dict) --
Container for the MultipartUpload for the Amazon S3 object.
UploadId (string) --
Upload ID that identifies the multipart upload.
Key (string) --
Key of the object for which the multipart upload was initiated.
Initiated (datetime) --
Date and time at which the multipart upload was initiated.
StorageClass (string) --
The class of storage used to store the object.
Owner (dict) --
Specifies the owner of the object that is part of the multipart upload.
DisplayName (string) --
Container for the display name of the owner.
ID (string) --
Container for the ID of the owner.
Initiator (dict) --
Identifies who initiated the multipart upload.
ID (string) --
If the principal is an Amazon Web Services account, it provides the Canonical User ID. If the principal is an IAM User, it provides a user ARN value.
DisplayName (string) --
Name of the Principal.
CommonPrefixes (list) --
If you specify a delimiter in the request, then the result returns each distinct key prefix containing the delimiter in a CommonPrefixes element. The distinct key prefixes are returned in the Prefix child element.
(dict) --
Container for all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter. CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix. For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/.
Prefix (string) --
Container for the specified common prefix.
EncodingType (string) --
Encoding type used by Amazon S3 to encode object keys in the response.
If you specify encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:
Delimiter, KeyMarker, Prefix, NextKeyMarker, Key.
{'Contents': {'StorageClass': {'GLACIER_IR'}}}
Returns some or all (up to 1,000) of the objects in a bucket. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Be sure to design your application to parse the contents of the response and handle it appropriately.
The following operations are related to ListObjects:
See also: AWS API Documentation
Request Syntax
client.list_objects(
Bucket='string',
Delimiter='string',
EncodingType='url',
Marker='string',
MaxKeys=123,
Prefix='string',
RequestPayer='requester',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket containing the objects.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
A delimiter is a character you use to group keys.
string
Requests Amazon S3 to encode the object keys in the response and specifies the encoding method to use. An object key may contain any Unicode character; however, XML 1.0 parser cannot parse some characters, such as characters with an ASCII value from 0 to 10. For characters that are not supported in XML 1.0, you can add this parameter to request that Amazon S3 encode the keys in the response.
string
Marker is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. Marker can be any key in the bucket.
integer
Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
string
Limits the response to keys that begin with the specified prefix.
string
Confirms that the requester knows that she or he will be charged for the list objects request. Bucket owners need not specify this parameter in their requests.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'IsTruncated': True|False,
'Marker': 'string',
'NextMarker': 'string',
'Contents': [
{
'Key': 'string',
'LastModified': datetime(2015, 1, 1),
'ETag': 'string',
'Size': 123,
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'Owner': {
'DisplayName': 'string',
'ID': 'string'
}
},
],
'Name': 'string',
'Prefix': 'string',
'Delimiter': 'string',
'MaxKeys': 123,
'CommonPrefixes': [
{
'Prefix': 'string'
},
],
'EncodingType': 'url'
}
Response Structure
(dict) --
IsTruncated (boolean) --
A flag that indicates whether Amazon S3 returned all of the results that satisfied the search criteria.
Marker (string) --
Indicates where in the bucket listing begins. Marker is included in the response if it was sent with the request.
NextMarker (string) --
When response is truncated (the IsTruncated element value in the response is true), you can use the key name in this field as marker in the subsequent request to get next set of objects. Amazon S3 lists objects in alphabetical order Note: This element is returned only if you have delimiter request parameter specified. If response does not include the NextMarker and it is truncated, you can use the value of the last Key in the response as the marker in the subsequent request to get the next set of object keys.
Contents (list) --
Metadata about each object returned.
(dict) --
An object consists of data and its descriptive metadata.
Key (string) --
The name that you assign to an object. You use the object key to retrieve the object.
LastModified (datetime) --
Creation date of the object.
ETag (string) --
The entity tag is a hash of the object. The ETag reflects changes only to the contents of an object, not its metadata. The ETag may or may not be an MD5 digest of the object data. Whether or not it is depends on how the object was created and how it is encrypted as described below:
Objects created by the PUT Object, POST Object, or Copy operation, or through the Amazon Web Services Management Console, and are encrypted by SSE-S3 or plaintext, have ETags that are an MD5 digest of their object data.
Objects created by the PUT Object, POST Object, or Copy operation, or through the Amazon Web Services Management Console, and are encrypted by SSE-C or SSE-KMS, have ETags that are not an MD5 digest of their object data.
If an object is created by either the Multipart Upload or Part Copy operation, the ETag is not an MD5 digest, regardless of the method of encryption.
Size (integer) --
Size in bytes of the object
StorageClass (string) --
The class of storage used to store the object.
Owner (dict) --
The owner of the object
DisplayName (string) --
Container for the display name of the owner.
ID (string) --
Container for the ID of the owner.
Name (string) --
The bucket name.
Prefix (string) --
Keys that begin with the indicated prefix.
Delimiter (string) --
Causes keys that contain the same string between the prefix and the first occurrence of the delimiter to be rolled up into a single result element in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere in the response. Each rolled-up result counts as only one return against the MaxKeys value.
MaxKeys (integer) --
The maximum number of keys returned in the response body.
CommonPrefixes (list) --
All of the keys (up to 1,000) rolled up in a common prefix count as a single return when calculating the number of returns.
A response can contain CommonPrefixes only if you specify a delimiter.
CommonPrefixes contains all (if there are any) keys between Prefix and the next occurrence of the string specified by the delimiter.
CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix.
For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/. All of the keys that roll up into a common prefix count as a single return when calculating the number of returns.
(dict) --
Container for all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter. CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix. For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/.
Prefix (string) --
Container for the specified common prefix.
EncodingType (string) --
Encoding type used by Amazon S3 to encode object keys in the response.
{'Contents': {'StorageClass': {'GLACIER_IR'}}}
Returns some or all (up to 1,000) of the objects in a bucket with each request. You can use the request parameters as selection criteria to return a subset of the objects in a bucket. A 200 OK response can contain valid or invalid XML. Make sure to design your application to parse the contents of the response and handle it appropriately. Objects are returned sorted in an ascending order of the respective key names in the list. For more information about listing objects, see Listing object keys programmatically
To use this operation, you must have READ access to the bucket.
To use this action in an Identity and Access Management (IAM) policy, you must have permissions to perform the s3:ListBucket action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources.
To get a list of your buckets, see ListBuckets.
The following operations are related to ListObjectsV2:
See also: AWS API Documentation
Request Syntax
client.list_objects_v2(
Bucket='string',
Delimiter='string',
EncodingType='url',
MaxKeys=123,
Prefix='string',
ContinuationToken='string',
FetchOwner=True|False,
StartAfter='string',
RequestPayer='requester',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
Bucket name to list.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
A delimiter is a character you use to group keys.
string
Encoding type used by Amazon S3 to encode object keys in the response.
integer
Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
string
Limits the response to keys that begin with the specified prefix.
string
ContinuationToken indicates Amazon S3 that the list is being continued on this bucket with a token. ContinuationToken is obfuscated and is not a real key.
boolean
The owner field is not present in listV2 by default, if you want to return owner field with each key in the result then set the fetch owner field to true.
string
StartAfter is where you want Amazon S3 to start listing from. Amazon S3 starts listing after this specified key. StartAfter can be any key in the bucket.
string
Confirms that the requester knows that she or he will be charged for the list objects request in V2 style. Bucket owners need not specify this parameter in their requests.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'IsTruncated': True|False,
'Contents': [
{
'Key': 'string',
'LastModified': datetime(2015, 1, 1),
'ETag': 'string',
'Size': 123,
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'Owner': {
'DisplayName': 'string',
'ID': 'string'
}
},
],
'Name': 'string',
'Prefix': 'string',
'Delimiter': 'string',
'MaxKeys': 123,
'CommonPrefixes': [
{
'Prefix': 'string'
},
],
'EncodingType': 'url',
'KeyCount': 123,
'ContinuationToken': 'string',
'NextContinuationToken': 'string',
'StartAfter': 'string'
}
Response Structure
(dict) --
IsTruncated (boolean) --
Set to false if all of the results were returned. Set to true if more keys are available to return. If the number of results exceeds that specified by MaxKeys, all of the results might not be returned.
Contents (list) --
Metadata about each object returned.
(dict) --
An object consists of data and its descriptive metadata.
Key (string) --
The name that you assign to an object. You use the object key to retrieve the object.
LastModified (datetime) --
Creation date of the object.
ETag (string) --
The entity tag is a hash of the object. The ETag reflects changes only to the contents of an object, not its metadata. The ETag may or may not be an MD5 digest of the object data. Whether or not it is depends on how the object was created and how it is encrypted as described below:
Objects created by the PUT Object, POST Object, or Copy operation, or through the Amazon Web Services Management Console, and are encrypted by SSE-S3 or plaintext, have ETags that are an MD5 digest of their object data.
Objects created by the PUT Object, POST Object, or Copy operation, or through the Amazon Web Services Management Console, and are encrypted by SSE-C or SSE-KMS, have ETags that are not an MD5 digest of their object data.
If an object is created by either the Multipart Upload or Part Copy operation, the ETag is not an MD5 digest, regardless of the method of encryption.
Size (integer) --
Size in bytes of the object
StorageClass (string) --
The class of storage used to store the object.
Owner (dict) --
The owner of the object
DisplayName (string) --
Container for the display name of the owner.
ID (string) --
Container for the ID of the owner.
Name (string) --
The bucket name.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
Prefix (string) --
Keys that begin with the indicated prefix.
Delimiter (string) --
Causes keys that contain the same string between the prefix and the first occurrence of the delimiter to be rolled up into a single result element in the CommonPrefixes collection. These rolled-up keys are not returned elsewhere in the response. Each rolled-up result counts as only one return against the MaxKeys value.
MaxKeys (integer) --
Sets the maximum number of keys returned in the response. By default the action returns up to 1,000 key names. The response might contain fewer keys but will never contain more.
CommonPrefixes (list) --
All of the keys (up to 1,000) rolled up into a common prefix count as a single return when calculating the number of returns.
A response can contain CommonPrefixes only if you specify a delimiter.
CommonPrefixes contains all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter.
CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix.
For example, if the prefix is notes/ and the delimiter is a slash ( /) as in notes/summer/july, the common prefix is notes/summer/. All of the keys that roll up into a common prefix count as a single return when calculating the number of returns.
(dict) --
Container for all (if there are any) keys between Prefix and the next occurrence of the string specified by a delimiter. CommonPrefixes lists keys that act like subdirectories in the directory specified by Prefix. For example, if the prefix is notes/ and the delimiter is a slash (/) as in notes/summer/july, the common prefix is notes/summer/.
Prefix (string) --
Container for the specified common prefix.
EncodingType (string) --
Encoding type used by Amazon S3 to encode object key names in the XML response.
If you specify the encoding-type request parameter, Amazon S3 includes this element in the response, and returns encoded key name values in the following response elements:
Delimiter, Prefix, Key, and StartAfter.
KeyCount (integer) --
KeyCount is the number of keys returned with this request. KeyCount will always be less than or equals to MaxKeys field. Say you ask for 50 keys, your result will include less than equals 50 keys
ContinuationToken (string) --
If ContinuationToken was sent with the request, it is included in the response.
NextContinuationToken (string) --
NextContinuationToken is sent when isTruncated is true, which means there are more keys in the bucket that can be listed. The next list requests to Amazon S3 can be continued with this NextContinuationToken. NextContinuationToken is obfuscated and is not a real key
StartAfter (string) --
If StartAfter was sent with the request, it is included in the response.
{'StorageClass': {'GLACIER_IR'}}
Lists the parts that have been uploaded for a specific multipart upload. This operation must include the upload ID, which you obtain by sending the initiate multipart upload request (see CreateMultipartUpload). This request returns a maximum of 1,000 uploaded parts. The default number of parts returned is 1,000 parts. You can restrict the number of parts returned by specifying the max-parts request parameter. If your multipart upload consists of more than 1,000 parts, the response returns an IsTruncated field with the value of true, and a NextPartNumberMarker element. In subsequent ListParts requests you can include the part-number-marker query string parameter and set its value to the NextPartNumberMarker field value from the previous response.
For more information on multipart uploads, see Uploading Objects Using Multipart Upload.
For information on permissions required to use the multipart upload API, see Multipart Upload and Permissions.
The following operations are related to ListParts:
See also: AWS API Documentation
Request Syntax
client.list_parts(
Bucket='string',
Key='string',
MaxParts=123,
PartNumberMarker=123,
UploadId='string',
RequestPayer='requester',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket to which the parts are being uploaded.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
[REQUIRED]
Object key for which the multipart upload was initiated.
integer
Sets the maximum number of parts to return.
integer
Specifies the part after which listing should begin. Only parts with higher part numbers will be listed.
string
[REQUIRED]
Upload ID identifying the multipart upload whose parts are being listed.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'AbortDate': datetime(2015, 1, 1),
'AbortRuleId': 'string',
'Bucket': 'string',
'Key': 'string',
'UploadId': 'string',
'PartNumberMarker': 123,
'NextPartNumberMarker': 123,
'MaxParts': 123,
'IsTruncated': True|False,
'Parts': [
{
'PartNumber': 123,
'LastModified': datetime(2015, 1, 1),
'ETag': 'string',
'Size': 123
},
],
'Initiator': {
'ID': 'string',
'DisplayName': 'string'
},
'Owner': {
'DisplayName': 'string',
'ID': 'string'
},
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'RequestCharged': 'requester'
}
Response Structure
(dict) --
AbortDate (datetime) --
If the bucket has a lifecycle rule configured with an action to abort incomplete multipart uploads and the prefix in the lifecycle rule matches the object name in the request, then the response includes this header indicating when the initiated multipart upload will become eligible for abort operation. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy.
The response will also include the x-amz-abort-rule-id header that will provide the ID of the lifecycle configuration rule that defines this action.
AbortRuleId (string) --
This header is returned along with the x-amz-abort-date header. It identifies applicable lifecycle configuration rule that defines the action to abort incomplete multipart uploads.
Bucket (string) --
The name of the bucket to which the multipart upload was initiated. Does not return the access point ARN or access point alias if used.
Key (string) --
Object key for which the multipart upload was initiated.
UploadId (string) --
Upload ID identifying the multipart upload whose parts are being listed.
PartNumberMarker (integer) --
When a list is truncated, this element specifies the last part in the list, as well as the value to use for the part-number-marker request parameter in a subsequent request.
NextPartNumberMarker (integer) --
When a list is truncated, this element specifies the last part in the list, as well as the value to use for the part-number-marker request parameter in a subsequent request.
MaxParts (integer) --
Maximum number of parts that were allowed in the response.
IsTruncated (boolean) --
Indicates whether the returned list of parts is truncated. A true value indicates that the list was truncated. A list can be truncated if the number of parts exceeds the limit returned in the MaxParts element.
Parts (list) --
Container for elements related to a particular part. A response can contain zero or more Part elements.
(dict) --
Container for elements related to a part.
PartNumber (integer) --
Part number identifying the part. This is a positive integer between 1 and 10,000.
LastModified (datetime) --
Date and time at which the part was uploaded.
ETag (string) --
Entity tag returned when the part was uploaded.
Size (integer) --
Size in bytes of the uploaded part data.
Initiator (dict) --
Container element that identifies who initiated the multipart upload. If the initiator is an Amazon Web Services account, this element provides the same information as the Owner element. If the initiator is an IAM User, this element provides the user ARN and display name.
ID (string) --
If the principal is an Amazon Web Services account, it provides the Canonical User ID. If the principal is an IAM User, it provides a user ARN value.
DisplayName (string) --
Name of the Principal.
Owner (dict) --
Container element that identifies the object owner, after the object is created. If multipart upload is initiated by an IAM user, this element provides the parent account ID and display name.
DisplayName (string) --
Container for the display name of the owner.
ID (string) --
Container for the ID of the owner.
StorageClass (string) --
Class of storage (STANDARD or REDUCED_REDUNDANCY) used to store the uploaded object.
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
{'LifecycleConfiguration': {'Rules': {'NoncurrentVersionTransition': {'StorageClass': {'GLACIER_IR'}},
'Transition': {'StorageClass': {'GLACIER_IR'}}}}}
Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. For information about lifecycle configuration, see Object Lifecycle Management in the Amazon S3 User Guide.
By default, all Amazon S3 resources, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration) are private. Only the resource owner, the Amazon Web Services account that created the resource, can access it. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, users must get the s3:PutLifecycleConfiguration permission.
You can also explicitly deny permissions. Explicit denial also supersedes any other permissions. If you want to prevent users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:
s3:DeleteObject
s3:DeleteObjectVersion
s3:PutLifecycleConfiguration
For more information about permissions, see Managing Access Permissions to your Amazon S3 Resources in the Amazon S3 User Guide.
For more examples of transitioning objects to storage classes such as STANDARD_IA or ONEZONE_IA, see Examples of Lifecycle Configuration.
Related Resources
`GetBucketLifecycle <https://docs.aws.amazon.com/AmazonS3/latest/API/API_GetBucketLifecycle.html>`__(Deprecated)
By default, a resource owner—in this case, a bucket owner, which is the Amazon Web Services account that created the bucket—can perform any of the operations. A resource owner can also grant others permission to perform the operation. For more information, see the following topics in the Amazon S3 User Guide:
See also: AWS API Documentation
Request Syntax
client.put_bucket_lifecycle(
Bucket='string',
ContentMD5='string',
LifecycleConfiguration={
'Rules': [
{
'Expiration': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'ExpiredObjectDeleteMarker': True|False
},
'ID': 'string',
'Prefix': 'string',
'Status': 'Enabled'|'Disabled',
'Transition': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR'
},
'NoncurrentVersionTransition': {
'NoncurrentDays': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR',
'NewerNoncurrentVersions': 123
},
'NoncurrentVersionExpiration': {
'NoncurrentDays': 123,
'NewerNoncurrentVersions': 123
},
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
}
},
]
},
ExpectedBucketOwner='string'
)
string
[REQUIRED]
string
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
dict
Rules (list) -- [REQUIRED]
Specifies lifecycle configuration rules for an Amazon S3 bucket.
(dict) --
Specifies lifecycle rules for an Amazon S3 bucket. For more information, see Put Bucket Lifecycle Configuration in the Amazon S3 API Reference. For examples, see Put Bucket Lifecycle Configuration Examples.
Expiration (dict) --
Specifies the expiration for the lifecycle of the object.
Date (datetime) --
Indicates at what date the object is to be moved or deleted. Should be in GMT ISO 8601 Format.
Days (integer) --
Indicates the lifetime, in days, of the objects that are subject to the rule. The value must be a non-zero positive integer.
ExpiredObjectDeleteMarker (boolean) --
Indicates whether Amazon S3 will remove a delete marker with no noncurrent versions. If set to true, the delete marker will be expired; if set to false the policy takes no action. This cannot be specified with Days or Date in a Lifecycle Expiration Policy.
ID (string) --
Unique identifier for the rule. The value can't be longer than 255 characters.
Prefix (string) -- [REQUIRED]
Object key prefix that identifies one or more objects to which this rule applies.
Status (string) -- [REQUIRED]
If Enabled, the rule is currently being applied. If Disabled, the rule is not currently being applied.
Transition (dict) --
Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon S3 User Guide.
Date (datetime) --
Indicates when objects are transitioned to the specified storage class. The date value must be in ISO 8601 format. The time is always midnight UTC.
Days (integer) --
Indicates the number of days after creation when objects are transitioned to the specified storage class. The value must be a positive integer.
StorageClass (string) --
The storage class to which you want the object to transition.
NoncurrentVersionTransition (dict) --
Container for the transition rule that describes when noncurrent objects transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates How Long an Object Has Been Noncurrent in the Amazon S3 User Guide.
StorageClass (string) --
The class of storage used to store the object.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
NoncurrentVersionExpiration (dict) --
Specifies when noncurrent object versions expire. Upon expiration, Amazon S3 permanently deletes the noncurrent object versions. You set this lifecycle configuration action on a bucket that has versioning enabled (or suspended) to request that Amazon S3 delete noncurrent object versions at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates When an Object Became Noncurrent in the Amazon S3 User Guide.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
AbortIncompleteMultipartUpload (dict) --
Specifies the days since the initiation of an incomplete multipart upload that Amazon S3 will wait before permanently removing all parts of the upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy in the Amazon S3 User Guide.
DaysAfterInitiation (integer) --
Specifies the number of days after which Amazon S3 aborts an incomplete multipart upload.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
None
{'LifecycleConfiguration': {'Rules': {'NoncurrentVersionTransitions': {'StorageClass': {'GLACIER_IR'}},
'Transitions': {'StorageClass': {'GLACIER_IR'}}}}}
Creates a new lifecycle configuration for the bucket or replaces an existing lifecycle configuration. For information about lifecycle configuration, see Managing your storage lifecycle.
Rules
You specify the lifecycle configuration in your request body. The lifecycle configuration is specified as XML consisting of one or more rules. Each rule consists of the following:
Filter identifying a subset of objects to which the rule applies. The filter can be based on a key name prefix, object tags, or a combination of both.
Status whether the rule is in effect.
One or more lifecycle transition and expiration actions that you want Amazon S3 to perform on the objects identified by the filter. If the state of your bucket is versioning-enabled or versioning-suspended, you can have many versions of the same object (one current version and zero or more noncurrent versions). Amazon S3 provides predefined actions that you can specify for current and noncurrent object versions.
For more information, see Object Lifecycle Management and Lifecycle Configuration Elements.
Permissions
By default, all Amazon S3 resources are private, including buckets, objects, and related subresources (for example, lifecycle configuration and website configuration). Only the resource owner (that is, the Amazon Web Services account that created it) can access the resource. The resource owner can optionally grant access permissions to others by writing an access policy. For this operation, a user must get the s3:PutLifecycleConfiguration permission.
You can also explicitly deny permissions. Explicit deny also supersedes any other permissions. If you want to block users or accounts from removing or deleting objects from your bucket, you must deny them permissions for the following actions:
s3:DeleteObject
s3:DeleteObjectVersion
s3:PutLifecycleConfiguration
For more information about permissions, see Managing Access Permissions to Your Amazon S3 Resources.
The following are related to PutBucketLifecycleConfiguration:
See also: AWS API Documentation
Request Syntax
client.put_bucket_lifecycle_configuration(
Bucket='string',
LifecycleConfiguration={
'Rules': [
{
'Expiration': {
'Date': datetime(2015, 1, 1),
'Days': 123,
'ExpiredObjectDeleteMarker': True|False
},
'ID': 'string',
'Prefix': 'string',
'Filter': {
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'ObjectSizeGreaterThan': 123,
'ObjectSizeLessThan': 123,
'And': {
'Prefix': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ObjectSizeGreaterThan': 123,
'ObjectSizeLessThan': 123
}
},
'Status': 'Enabled'|'Disabled',
'Transitions': [
{
'Date': datetime(2015, 1, 1),
'Days': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR'
},
],
'NoncurrentVersionTransitions': [
{
'NoncurrentDays': 123,
'StorageClass': 'GLACIER'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'DEEP_ARCHIVE'|'GLACIER_IR',
'NewerNoncurrentVersions': 123
},
],
'NoncurrentVersionExpiration': {
'NoncurrentDays': 123,
'NewerNoncurrentVersions': 123
},
'AbortIncompleteMultipartUpload': {
'DaysAfterInitiation': 123
}
},
]
},
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket for which to set the configuration.
dict
Container for lifecycle rules. You can add as many as 1,000 rules.
Rules (list) -- [REQUIRED]
A lifecycle rule for individual objects in an Amazon S3 bucket.
(dict) --
A lifecycle rule for individual objects in an Amazon S3 bucket.
Expiration (dict) --
Specifies the expiration for the lifecycle of the object in the form of date, days and, whether the object has a delete marker.
Date (datetime) --
Indicates at what date the object is to be moved or deleted. Should be in GMT ISO 8601 Format.
Days (integer) --
Indicates the lifetime, in days, of the objects that are subject to the rule. The value must be a non-zero positive integer.
ExpiredObjectDeleteMarker (boolean) --
Indicates whether Amazon S3 will remove a delete marker with no noncurrent versions. If set to true, the delete marker will be expired; if set to false the policy takes no action. This cannot be specified with Days or Date in a Lifecycle Expiration Policy.
ID (string) --
Unique identifier for the rule. The value cannot be longer than 255 characters.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies. This is no longer used; use Filter instead.
Filter (dict) --
The Filter is used to identify objects that a Lifecycle Rule applies to. A Filter must have exactly one of Prefix, Tag, or And specified. Filter is required if the LifecycleRule does not containt a Prefix element.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies.
Tag (dict) --
This tag must exist in the object's tag set in order for the rule to apply.
Key (string) -- [REQUIRED]
Name of the object key.
Value (string) -- [REQUIRED]
Value of the tag.
ObjectSizeGreaterThan (integer) --
Minimum object size to which the rule applies.
ObjectSizeLessThan (integer) --
Maximum object size to which the rule applies.
And (dict) --
This is used in a Lifecycle Rule Filter to apply a logical AND to two or more predicates. The Lifecycle Rule will apply to any object matching all of the predicates configured inside the And operator.
Prefix (string) --
Prefix identifying one or more objects to which the rule applies.
Tags (list) --
All of these tags must exist in the object's tag set in order for the rule to apply.
(dict) --
A container of a key value name pair.
Key (string) -- [REQUIRED]
Name of the object key.
Value (string) -- [REQUIRED]
Value of the tag.
ObjectSizeGreaterThan (integer) --
Minimum object size to which the rule applies.
ObjectSizeLessThan (integer) --
Maximum object size to which the rule applies.
Status (string) -- [REQUIRED]
If 'Enabled', the rule is currently being applied. If 'Disabled', the rule is not currently being applied.
Transitions (list) --
Specifies when an Amazon S3 object transitions to a specified storage class.
(dict) --
Specifies when an object transitions to a specified storage class. For more information about Amazon S3 lifecycle configuration rules, see Transitioning Objects Using Amazon S3 Lifecycle in the Amazon S3 User Guide.
Date (datetime) --
Indicates when objects are transitioned to the specified storage class. The date value must be in ISO 8601 format. The time is always midnight UTC.
Days (integer) --
Indicates the number of days after creation when objects are transitioned to the specified storage class. The value must be a positive integer.
StorageClass (string) --
The storage class to which you want the object to transition.
NoncurrentVersionTransitions (list) --
Specifies the transition rule for the lifecycle rule that describes when noncurrent objects transition to a specific storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to a specific storage class at a set period in the object's lifetime.
(dict) --
Container for the transition rule that describes when noncurrent objects transition to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class. If your bucket is versioning-enabled (or versioning is suspended), you can set this action to request that Amazon S3 transition noncurrent object versions to the STANDARD_IA, ONEZONE_IA, INTELLIGENT_TIERING, GLACIER_IR, GLACIER, or DEEP_ARCHIVE storage class at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates How Long an Object Has Been Noncurrent in the Amazon S3 User Guide.
StorageClass (string) --
The class of storage used to store the object.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
NoncurrentVersionExpiration (dict) --
Specifies when noncurrent object versions expire. Upon expiration, Amazon S3 permanently deletes the noncurrent object versions. You set this lifecycle configuration action on a bucket that has versioning enabled (or suspended) to request that Amazon S3 delete noncurrent object versions at a specific period in the object's lifetime.
NoncurrentDays (integer) --
Specifies the number of days an object is noncurrent before Amazon S3 can perform the associated action. For information about the noncurrent days calculations, see How Amazon S3 Calculates When an Object Became Noncurrent in the Amazon S3 User Guide.
NewerNoncurrentVersions (integer) --
Specifies how many noncurrent versions Amazon S3 will retain. If there are this many more recent noncurrent versions, Amazon S3 will take the associated action. For more information about noncurrent versions, see Lifecycle configuration elements in the Amazon S3 User Guide.
AbortIncompleteMultipartUpload (dict) --
Specifies the days since the initiation of an incomplete multipart upload that Amazon S3 will wait before permanently removing all parts of the upload. For more information, see Aborting Incomplete Multipart Uploads Using a Bucket Lifecycle Policy in the Amazon S3 User Guide.
DaysAfterInitiation (integer) --
Specifies the number of days after which Amazon S3 aborts an incomplete multipart upload.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
None
{'OwnershipControls': {'Rules': {'ObjectOwnership': {'BucketOwnerEnforced'}}}}
Creates or modifies OwnershipControls for an Amazon S3 bucket. To use this operation, you must have the s3:PutBucketOwnershipControls permission. For more information about Amazon S3 permissions, see Specifying permissions in a policy.
For information about Amazon S3 Object Ownership, see Using object ownership.
The following operations are related to PutBucketOwnershipControls:
GetBucketOwnershipControls
DeleteBucketOwnershipControls
See also: AWS API Documentation
Request Syntax
client.put_bucket_ownership_controls(
Bucket='string',
ContentMD5='string',
ExpectedBucketOwner='string',
OwnershipControls={
'Rules': [
{
'ObjectOwnership': 'BucketOwnerPreferred'|'ObjectWriter'|'BucketOwnerEnforced'
},
]
}
)
string
[REQUIRED]
The name of the Amazon S3 bucket whose OwnershipControls you want to set.
string
The MD5 hash of the OwnershipControls request body.
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
[REQUIRED]
The OwnershipControls (BucketOwnerEnforced, BucketOwnerPreferred, or ObjectWriter) that you want to apply to this Amazon S3 bucket.
Rules (list) -- [REQUIRED]
The container element for an ownership control rule.
(dict) --
The container element for an ownership control rule.
ObjectOwnership (string) -- [REQUIRED]
The container element for object ownership for a bucket's ownership controls.
BucketOwnerPreferred - Objects uploaded to the bucket change ownership to the bucket owner if the objects are uploaded with the bucket-owner-full-control canned ACL.
ObjectWriter - The uploading account will own the object if the object is uploaded with the bucket-owner-full-control canned ACL.
BucketOwnerEnforced - Access control lists (ACLs) are disabled and no longer affect permissions. The bucket owner automatically owns and has full control over every object in the bucket. The bucket only accepts PUT requests that don't specify an ACL or bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format.
None
{'ReplicationConfiguration': {'Rules': {'Destination': {'StorageClass': {'GLACIER_IR'}}}}}
Creates a replication configuration or replaces an existing one. For more information, see Replication in the Amazon S3 User Guide.
Specify the replication configuration in the request body. In the replication configuration, you provide the name of the destination bucket or buckets where you want Amazon S3 to replicate objects, the IAM role that Amazon S3 can assume to replicate objects on your behalf, and other relevant information.
A replication configuration must include at least one rule, and can contain a maximum of 1,000. Each rule identifies a subset of objects to replicate by filtering the objects in the source bucket. To choose additional subsets of objects to replicate, add a rule for each subset.
To specify a subset of the objects in the source bucket to apply a replication rule to, add the Filter element as a child of the Rule element. You can filter objects based on an object key prefix, one or more object tags, or both. When you add the Filter element in the configuration, you must also add the following elements: DeleteMarkerReplication, Status, and Priority.
For information about enabling versioning on a bucket, see Using Versioning.
Handling Replication of Encrypted Objects
By default, Amazon S3 doesn't replicate objects that are stored at rest using server-side encryption with KMS keys. To replicate Amazon Web Services KMS-encrypted objects, add the following: SourceSelectionCriteria, SseKmsEncryptedObjects, Status, EncryptionConfiguration, and ReplicaKmsKeyID. For information about replication configuration, see Replicating Objects Created with SSE Using KMS keys.
For information on PutBucketReplication errors, see List of replication-related error codes
Permissions
To create a PutBucketReplication request, you must have s3:PutReplicationConfiguration permissions for the bucket.
By default, a resource owner, in this case the Amazon Web Services account that created the bucket, can perform this operation. The resource owner can also grant others permissions to perform the operation. For more information about permissions, see Specifying Permissions in a Policy and Managing Access Permissions to Your Amazon S3 Resources.
The following operations are related to PutBucketReplication:
See also: AWS API Documentation
Request Syntax
client.put_bucket_replication(
Bucket='string',
ContentMD5='string',
ReplicationConfiguration={
'Role': 'string',
'Rules': [
{
'ID': 'string',
'Priority': 123,
'Prefix': 'string',
'Filter': {
'Prefix': 'string',
'Tag': {
'Key': 'string',
'Value': 'string'
},
'And': {
'Prefix': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
},
'Status': 'Enabled'|'Disabled',
'SourceSelectionCriteria': {
'SseKmsEncryptedObjects': {
'Status': 'Enabled'|'Disabled'
},
'ReplicaModifications': {
'Status': 'Enabled'|'Disabled'
}
},
'ExistingObjectReplication': {
'Status': 'Enabled'|'Disabled'
},
'Destination': {
'Bucket': 'string',
'Account': 'string',
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
'AccessControlTranslation': {
'Owner': 'Destination'
},
'EncryptionConfiguration': {
'ReplicaKmsKeyID': 'string'
},
'ReplicationTime': {
'Status': 'Enabled'|'Disabled',
'Time': {
'Minutes': 123
}
},
'Metrics': {
'Status': 'Enabled'|'Disabled',
'EventThreshold': {
'Minutes': 123
}
}
},
'DeleteMarkerReplication': {
'Status': 'Enabled'|'Disabled'
}
},
]
},
Token='string',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The name of the bucket
string
The base64-encoded 128-bit MD5 digest of the data. You must use this header as a message integrity check to verify that the request body was not corrupted in transit. For more information, see RFC 1864.
For requests made using the Amazon Web Services Command Line Interface (CLI) or Amazon Web Services SDKs, this field is calculated automatically.
dict
[REQUIRED]
A container for replication rules. You can add up to 1,000 rules. The maximum size of a replication configuration is 2 MB.
Role (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that Amazon S3 assumes when replicating objects. For more information, see How to Set Up Replication in the Amazon S3 User Guide.
Rules (list) -- [REQUIRED]
A container for one or more replication rules. A replication configuration must have at least one rule and can contain a maximum of 1,000 rules.
(dict) --
Specifies which Amazon S3 objects to replicate and where to store the replicas.
ID (string) --
A unique identifier for the rule. The maximum value is 255 characters.
Priority (integer) --
The priority indicates which rule has precedence whenever two or more replication rules conflict. Amazon S3 will attempt to replicate objects according to all replication rules. However, if there are two or more rules with the same destination bucket, then objects will be replicated according to the rule with the highest priority. The higher the number, the higher the priority.
For more information, see Replication in the Amazon S3 User Guide.
Prefix (string) --
An object key name prefix that identifies the object or objects to which the rule applies. The maximum prefix length is 1,024 characters. To include all objects in a bucket, specify an empty string.
Filter (dict) --
A filter that identifies the subset of objects to which the replication rule applies. A Filter must specify exactly one Prefix, Tag, or an And child element.
Prefix (string) --
An object key name prefix that identifies the subset of objects to which the rule applies.
Tag (dict) --
A container for specifying a tag key and value.
The rule applies only to objects that have the tag in their tag set.
Key (string) -- [REQUIRED]
Name of the object key.
Value (string) -- [REQUIRED]
Value of the tag.
And (dict) --
A container for specifying rule filters. The filters determine the subset of objects to which the rule applies. This element is required only if you specify more than one filter. For example:
If you specify both a Prefix and a Tag filter, wrap these filters in an And tag.
If you specify a filter based on multiple tags, wrap the Tag elements in an And tag.
Prefix (string) --
An object key name prefix that identifies the subset of objects to which the rule applies.
Tags (list) --
An array of tags containing key and value pairs.
(dict) --
A container of a key value name pair.
Key (string) -- [REQUIRED]
Name of the object key.
Value (string) -- [REQUIRED]
Value of the tag.
Status (string) -- [REQUIRED]
Specifies whether the rule is enabled.
SourceSelectionCriteria (dict) --
A container that describes additional filters for identifying the source objects that you want to replicate. You can choose to enable or disable the replication of these objects. Currently, Amazon S3 supports only the filter that you can specify for objects created with server-side encryption using a customer managed key stored in Amazon Web Services Key Management Service (SSE-KMS).
SseKmsEncryptedObjects (dict) --
A container for filter information for the selection of Amazon S3 objects encrypted with Amazon Web Services KMS. If you include SourceSelectionCriteria in the replication configuration, this element is required.
Status (string) -- [REQUIRED]
Specifies whether Amazon S3 replicates objects created with server-side encryption using an Amazon Web Services KMS key stored in Amazon Web Services Key Management Service.
ReplicaModifications (dict) --
A filter that you can specify for selections for modifications on replicas. Amazon S3 doesn't replicate replica modifications by default. In the latest version of replication configuration (when Filter is specified), you can specify this element and set the status to Enabled to replicate modifications on replicas.
Status (string) -- [REQUIRED]
Specifies whether Amazon S3 replicates modifications on replicas.
ExistingObjectReplication (dict) --
Status (string) -- [REQUIRED]
Destination (dict) -- [REQUIRED]
A container for information about the replication destination and its configurations including enabling the S3 Replication Time Control (S3 RTC).
Bucket (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the bucket where you want Amazon S3 to store the results.
Account (string) --
Destination bucket owner account ID. In a cross-account scenario, if you direct Amazon S3 to change replica ownership to the Amazon Web Services account that owns the destination bucket by specifying the AccessControlTranslation property, this is the account ID of the destination bucket owner. For more information, see Replication Additional Configuration: Changing the Replica Owner in the Amazon S3 User Guide.
StorageClass (string) --
The storage class to use when replicating objects, such as S3 Standard or reduced redundancy. By default, Amazon S3 uses the storage class of the source object to create the object replica.
For valid values, see the StorageClass element of the PUT Bucket replication action in the Amazon S3 API Reference.
AccessControlTranslation (dict) --
Specify this only in a cross-account scenario (where source and destination bucket owners are not the same), and you want to change replica ownership to the Amazon Web Services account that owns the destination bucket. If this is not specified in the replication configuration, the replicas are owned by same Amazon Web Services account that owns the source object.
Owner (string) -- [REQUIRED]
Specifies the replica ownership. For default and valid values, see PUT bucket replication in the Amazon S3 API Reference.
EncryptionConfiguration (dict) --
A container that provides information about encryption. If SourceSelectionCriteria is specified, you must specify this element.
ReplicaKmsKeyID (string) --
Specifies the ID (Key ARN or Alias ARN) of the customer managed Amazon Web Services KMS key stored in Amazon Web Services Key Management Service (KMS) for the destination bucket. Amazon S3 uses this key to encrypt replica objects. Amazon S3 only supports symmetric, customer managed KMS keys. For more information, see Using symmetric and asymmetric keys in the Amazon Web Services Key Management Service Developer Guide.
ReplicationTime (dict) --
A container specifying S3 Replication Time Control (S3 RTC), including whether S3 RTC is enabled and the time when all objects and operations on objects must be replicated. Must be specified together with a Metrics block.
Status (string) -- [REQUIRED]
Specifies whether the replication time is enabled.
Time (dict) -- [REQUIRED]
A container specifying the time by which replication should be complete for all objects and operations on objects.
Minutes (integer) --
Contains an integer specifying time in minutes.
Valid value: 15
Metrics (dict) --
A container specifying replication metrics-related settings enabling replication metrics and events.
Status (string) -- [REQUIRED]
Specifies whether the replication metrics are enabled.
EventThreshold (dict) --
A container specifying the time threshold for emitting the s3:Replication:OperationMissedThreshold event.
Minutes (integer) --
Contains an integer specifying time in minutes.
Valid value: 15
DeleteMarkerReplication (dict) --
Specifies whether Amazon S3 replicates delete markers. If you specify a Filter in your replication configuration, you must also include a DeleteMarkerReplication element. If your Filter includes a Tag element, the DeleteMarkerReplication Status must be set to Disabled, because Amazon S3 does not support replicating delete markers for tag-based rules. For an example configuration, see Basic Rule Configuration.
For more information about delete marker replication, see Basic Rule Configuration.
Status (string) --
Indicates whether to replicate delete markers.
string
A token to allow Object Lock to be enabled for an existing bucket.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
None
{'StorageClass': {'GLACIER_IR'}}
Adds an object to a bucket. You must have WRITE permissions on a bucket to add an object to it.
Amazon S3 never adds partial objects; if you receive a success response, Amazon S3 added the entire object to the bucket.
Amazon S3 is a distributed system. If it receives multiple write requests for the same object simultaneously, it overwrites all but the last object written. Amazon S3 does not provide object locking; if you need this, make sure to build it into your application layer or use versioning instead.
To ensure that data is not corrupted traversing the network, use the Content-MD5 header. When you use this header, Amazon S3 checks the object against the provided MD5 value and, if they do not match, returns an error. Additionally, you can calculate the MD5 while putting an object to Amazon S3 and compare the returned ETag to the calculated MD5 value.
Server-side Encryption
You can optionally request server-side encryption. With server-side encryption, Amazon S3 encrypts your data as it writes it to disks in its data centers and decrypts the data when you access it. You have the option to provide your own encryption key or use Amazon Web Services managed encryption keys (SSE-S3 or SSE-KMS). For more information, see Using Server-Side Encryption.
If you request server-side encryption using Amazon Web Services Key Management Service (SSE-KMS), you can enable an S3 Bucket Key at the object-level. For more information, see Amazon S3 Bucket Keys in the Amazon S3 User Guide.
Access Control List (ACL)-Specific Request Headers
You can use headers to grant ACL- based permissions. By default, all objects are private. Only the owner has full access control. When adding a new object, you can grant permissions to individual Amazon Web Services accounts or to predefined groups defined by Amazon S3. These permissions are then added to the ACL on the object. For more information, see Access Control List (ACL) Overview and Managing ACLs Using the REST API.
If the bucket that you're uploading objects to uses the bucket owner enforced setting for S3 Object Ownership, ACLs are disabled and no longer affect permissions. Buckets that use this setting only accept PUT requests that don't specify an ACL or PUT requests that specify bucket owner full control ACLs, such as the bucket-owner-full-control canned ACL or an equivalent form of this ACL expressed in the XML format. PUT requests that contain other ACLs (for example, custom grants to certain Amazon Web Services accounts) fail and return a 400 error with the error code AccessControlListNotSupported.
For more information, see Controlling ownership of objects and disabling ACLs in the Amazon S3 User Guide.
Storage Class Options
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
Versioning
If you enable versioning for a bucket, Amazon S3 automatically generates a unique version ID for the object being stored. Amazon S3 returns this ID in the response. When you enable versioning for a bucket, if Amazon S3 receives multiple write requests for the same object simultaneously, it stores all of the objects.
For more information about versioning, see Adding Objects to Versioning Enabled Buckets. For information about returning the versioning state of a bucket, see GetBucketVersioning.
Related Resources
See also: AWS API Documentation
Request Syntax
client.put_object(
ACL='private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
Body=b'bytes'|file,
Bucket='string',
CacheControl='string',
ContentDisposition='string',
ContentEncoding='string',
ContentLanguage='string',
ContentLength=123,
ContentMD5='string',
ContentType='string',
Expires=datetime(2015, 1, 1),
GrantFullControl='string',
GrantRead='string',
GrantReadACP='string',
GrantWriteACP='string',
Key='string',
Metadata={
'string': 'string'
},
ServerSideEncryption='AES256'|'aws:kms',
StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
WebsiteRedirectLocation='string',
SSECustomerAlgorithm='string',
SSECustomerKey='string',
SSECustomerKeyMD5='string',
SSEKMSKeyId='string',
SSEKMSEncryptionContext='string',
BucketKeyEnabled=True|False,
RequestPayer='requester',
Tagging='string',
ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
ObjectLockRetainUntilDate=datetime(2015, 1, 1),
ObjectLockLegalHoldStatus='ON'|'OFF',
ExpectedBucketOwner='string'
)
string
The canned ACL to apply to the object. For more information, see Canned ACL.
This action is not supported by Amazon S3 on Outposts.
bytes or seekable file-like object
Object data.
string
[REQUIRED]
The bucket name to which the PUT action was initiated.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
Can be used to specify caching behavior along the request/reply chain. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.9.
string
Specifies presentational information for the object. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec19.html#sec19.5.1.
string
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.11.
string
The language the content is in.
integer
Size of the body in bytes. This parameter is useful when the size of the body cannot be determined automatically. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13.
string
The base64-encoded 128-bit MD5 digest of the message (without the headers) according to RFC 1864. This header can be used as a message integrity check to verify that the data is the same data that was originally sent. Although it is optional, we recommend using the Content-MD5 mechanism as an end-to-end integrity check. For more information about REST request authentication, see REST Authentication.
string
A standard MIME type describing the format of the contents. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.17.
datetime
The date and time at which the object is no longer cacheable. For more information, see http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.21.
string
Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object data and its metadata.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to read the object ACL.
This action is not supported by Amazon S3 on Outposts.
string
Allows grantee to write the ACL for the applicable object.
This action is not supported by Amazon S3 on Outposts.
string
[REQUIRED]
Object key for which the PUT action was initiated.
dict
A map of metadata to store with the object in S3.
(string) --
(string) --
string
The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).
string
By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.
string
If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata. For information about object metadata, see Object Key and Metadata.
In the following example, the request header sets the redirect to an object (anotherPage.html) in the same bucket:
x-amz-website-redirect-location: /anotherPage.html
In the following example, the request header sets the object redirect to another website:
x-amz-website-redirect-location: http://www.example.com/
For more information about website hosting in Amazon S3, see Hosting Websites on Amazon S3 and How to Configure Website Page Redirects.
string
Specifies the algorithm to use to when encrypting the object (for example, AES256).
string
Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.
string
Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.
string
If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetrical customer managed key that was used for the object. If you specify x-amz-server-side-encryption:aws:kms, but do not provide `` x-amz-server-side-encryption-aws-kms-key-id``, Amazon S3 uses the Amazon Web Services managed key to protect the data. If the KMS key does not exist in the same account issuing the command, you must use the full ARN and not just the ID.
string
Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
boolean
Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.
Specifying this header with a PUT action doesn’t affect bucket-level settings for S3 Bucket Key.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
string
The tag-set for the object. The tag-set must be encoded as URL Query parameters. (For example, "Key1=Value1")
string
The Object Lock mode that you want to apply to this object.
datetime
The date and time when you want this object's Object Lock to expire. Must be formatted as a timestamp parameter.
string
Specifies whether a legal hold will be applied to this object. For more information about S3 Object Lock, see Object Lock.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'Expiration': 'string',
'ETag': 'string',
'ServerSideEncryption': 'AES256'|'aws:kms',
'VersionId': 'string',
'SSECustomerAlgorithm': 'string',
'SSECustomerKeyMD5': 'string',
'SSEKMSKeyId': 'string',
'SSEKMSEncryptionContext': 'string',
'BucketKeyEnabled': True|False,
'RequestCharged': 'requester'
}
Response Structure
(dict) --
Expiration (string) --
If the expiration is configured for the object (see PutBucketLifecycleConfiguration), the response includes this header. It includes the expiry-date and rule-id key-value pairs that provide information about object expiration. The value of the rule-id is URL encoded.
ETag (string) --
Entity tag for the uploaded object.
ServerSideEncryption (string) --
If you specified server-side encryption either with an Amazon Web Services KMS key or Amazon S3-managed encryption key in your PUT request, the response includes this header. It confirms the encryption algorithm that Amazon S3 used to encrypt the object.
VersionId (string) --
Version of the object.
SSECustomerAlgorithm (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header confirming the encryption algorithm used.
SSECustomerKeyMD5 (string) --
If server-side encryption with a customer-provided encryption key was requested, the response will include this header to provide round-trip message integrity verification of the customer-provided encryption key.
SSEKMSKeyId (string) --
If x-amz-server-side-encryption is present and has the value of aws:kms, this header specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for the object.
SSEKMSEncryptionContext (string) --
If present, specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.
BucketKeyEnabled (boolean) --
Indicates whether the uploaded object uses an S3 Bucket Key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
{'RestoreRequest': {'OutputLocation': {'S3': {'StorageClass': {'GLACIER_IR'}}}}}
Restores an archived copy of an object back into Amazon S3
This action is not supported by Amazon S3 on Outposts.
This action performs the following types of requests:
select - Perform a select query on an archived object
restore an archive - Restore an archived object
To use this operation, you must have permissions to perform the s3:RestoreObject action. The bucket owner has this permission by default and can grant this permission to others. For more information about permissions, see Permissions Related to Bucket Subresource Operations and Managing Access Permissions to Your Amazon S3 Resources in the Amazon S3 User Guide.
Querying Archives with Select Requests
You use a select type of request to perform SQL queries on archived objects. The archived objects that are being queried by the select request must be formatted as uncompressed comma-separated values (CSV) files. You can run queries and custom analytics on your archived data without having to restore your data to a hotter Amazon S3 tier. For an overview about select requests, see Querying Archived Objects in the Amazon S3 User Guide.
When making a select request, do the following:
Define an output location for the select query's output. This must be an Amazon S3 bucket in the same Amazon Web Services Region as the bucket that contains the archive object that is being queried. The Amazon Web Services account that initiates the job must have permissions to write to the S3 bucket. You can specify the storage class and encryption for the output objects stored in the bucket. For more information about output, see Querying Archived Objects in the Amazon S3 User Guide. For more information about the S3 structure in the request body, see the following:
Managing Access with ACLs in the Amazon S3 User Guide
Protecting Data Using Server-Side Encryption in the Amazon S3 User Guide
Define the SQL expression for the SELECT type of restoration for your query in the request body's SelectParameters structure. You can use expressions like the following examples.
The following expression returns all records from the specified object. SELECT * FROM Object
Assuming that you are not using any headers for data stored in the object, you can specify columns with positional headers. SELECT s._1, s._2 FROM Object s WHERE s._3 > 100
If you have headers and you set the fileHeaderInfo in the CSV structure in the request body to USE, you can specify headers in the query. (If you set the fileHeaderInfo field to IGNORE, the first row is skipped for the query.) You cannot mix ordinal positions with header column names. SELECT s.Id, s.FirstName, s.SSN FROM S3Object s
For more information about using SQL with S3 Glacier Select restore, see SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide.
When making a select request, you can also do the following:
To expedite your queries, specify the Expedited tier. For more information about tiers, see "Restoring Archives," later in this topic.
Specify details about the data serialization format of both the input object that is being queried and the serialization of the CSV-encoded query results.
The following are additional important facts about the select feature:
The output results are new Amazon S3 objects. Unlike archive retrievals, they are stored until explicitly deleted-manually or through a lifecycle policy.
You can issue more than one select request on the same Amazon S3 object. Amazon S3 doesn't deduplicate requests, so avoid issuing duplicate requests.
Amazon S3 accepts a select request even if the object has already been restored. A select request doesn’t return error response 409.
Restoring objects
Objects that you archive to the S3 Glacier or S3 Glacier Deep Archive storage class, and S3 Intelligent-Tiering Archive or S3 Intelligent-Tiering Deep Archive tiers are not accessible in real time. For objects in Archive Access or Deep Archive Access tiers you must first initiate a restore request, and then wait until the object is moved into the Frequent Access tier. For objects in S3 Glacier or S3 Glacier Deep Archive storage classes you must first initiate a restore request, and then wait until a temporary copy of the object is available. To access an archived object, you must restore the object for the duration (number of days) that you specify.
To restore a specific object version, you can provide a version ID. If you don't provide a version ID, Amazon S3 restores the current version.
When restoring an archived object (or using a select request), you can specify one of the following data access tier options in the Tier element of the request body:
Expedited - Expedited retrievals allow you to quickly access your data stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier when occasional urgent requests for a subset of archives are required. For all but the largest archived objects (250 MB+), data accessed using Expedited retrievals is typically made available within 1–5 minutes. Provisioned capacity ensures that retrieval capacity for Expedited retrievals is available when you need it. Expedited retrievals and provisioned capacity are not available for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier.
Standard - Standard retrievals allow you to access any of your archived objects within several hours. This is the default option for retrieval requests that do not specify the retrieval option. Standard retrievals typically finish within 3–5 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 12 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Standard retrievals are free for objects stored in S3 Intelligent-Tiering.
Bulk - Bulk retrievals are the lowest-cost retrieval option in S3 Glacier, enabling you to retrieve large amounts, even petabytes, of data inexpensively. Bulk retrievals typically finish within 5–12 hours for objects stored in the S3 Glacier storage class or S3 Intelligent-Tiering Archive tier. They typically finish within 48 hours for objects stored in the S3 Glacier Deep Archive storage class or S3 Intelligent-Tiering Deep Archive tier. Bulk retrievals are free for objects stored in S3 Intelligent-Tiering.
For more information about archive retrieval options and provisioned capacity for Expedited data access, see Restoring Archived Objects in the Amazon S3 User Guide.
You can use Amazon S3 restore speed upgrade to change the restore speed to a faster speed while it is in progress. For more information, see Upgrading the speed of an in-progress restore in the Amazon S3 User Guide.
To get the status of object restoration, you can send a HEAD request. Operations return the x-amz-restore header, which provides information about the restoration status, in the response. You can use Amazon S3 event notifications to notify you when a restore is initiated or completed. For more information, see Configuring Amazon S3 Event Notifications in the Amazon S3 User Guide.
After restoring an archived object, you can update the restoration period by reissuing the request with a new period. Amazon S3 updates the restoration period relative to the current time and charges only for the request-there are no data transfer charges. You cannot update the restoration period when Amazon S3 is actively processing your current restore request for the object.
If your bucket has a lifecycle configuration with a rule that includes an expiration action, the object expiration overrides the life span that you specify in a restore request. For example, if you restore an object copy for 10 days, but the object is scheduled to expire in 3 days, Amazon S3 deletes the object in 3 days. For more information about lifecycle configuration, see PutBucketLifecycleConfiguration and Object Lifecycle Management in Amazon S3 User Guide.
Responses
A successful action returns either the 200 OK or 202 Accepted status code.
If the object is not previously restored, then Amazon S3 returns 202 Accepted in the response.
If the object is previously restored, Amazon S3 returns 200 OK in the response.
Special Errors
Code: RestoreAlreadyInProgress
Cause: Object restore is already in progress. (This error does not apply to SELECT type requests.)
HTTP Status Code: 409 Conflict
SOAP Fault Code Prefix: Client
Code: GlacierExpeditedRetrievalNotAvailable
Cause: expedited retrievals are currently not available. Try again later. (Returned if there is insufficient capacity to process the Expedited request. This error applies only to Expedited retrievals and not to S3 Standard or Bulk retrievals.)
HTTP Status Code: 503
SOAP Fault Code Prefix: N/A
Related Resources
SQL Reference for Amazon S3 Select and S3 Glacier Select in the Amazon S3 User Guide
See also: AWS API Documentation
Request Syntax
client.restore_object(
Bucket='string',
Key='string',
VersionId='string',
RestoreRequest={
'Days': 123,
'GlacierJobParameters': {
'Tier': 'Standard'|'Bulk'|'Expedited'
},
'Type': 'SELECT',
'Tier': 'Standard'|'Bulk'|'Expedited',
'Description': 'string',
'SelectParameters': {
'InputSerialization': {
'CSV': {
'FileHeaderInfo': 'USE'|'IGNORE'|'NONE',
'Comments': 'string',
'QuoteEscapeCharacter': 'string',
'RecordDelimiter': 'string',
'FieldDelimiter': 'string',
'QuoteCharacter': 'string',
'AllowQuotedRecordDelimiter': True|False
},
'CompressionType': 'NONE'|'GZIP'|'BZIP2',
'JSON': {
'Type': 'DOCUMENT'|'LINES'
},
'Parquet': {}
},
'ExpressionType': 'SQL',
'Expression': 'string',
'OutputSerialization': {
'CSV': {
'QuoteFields': 'ALWAYS'|'ASNEEDED',
'QuoteEscapeCharacter': 'string',
'RecordDelimiter': 'string',
'FieldDelimiter': 'string',
'QuoteCharacter': 'string'
},
'JSON': {
'RecordDelimiter': 'string'
}
}
},
'OutputLocation': {
'S3': {
'BucketName': 'string',
'Prefix': 'string',
'Encryption': {
'EncryptionType': 'AES256'|'aws:kms',
'KMSKeyId': 'string',
'KMSContext': 'string'
},
'CannedACL': 'private'|'public-read'|'public-read-write'|'authenticated-read'|'aws-exec-read'|'bucket-owner-read'|'bucket-owner-full-control',
'AccessControlList': [
{
'Grantee': {
'DisplayName': 'string',
'EmailAddress': 'string',
'ID': 'string',
'Type': 'CanonicalUser'|'AmazonCustomerByEmail'|'Group',
'URI': 'string'
},
'Permission': 'FULL_CONTROL'|'WRITE'|'WRITE_ACP'|'READ'|'READ_ACP'
},
],
'Tagging': {
'TagSet': [
{
'Key': 'string',
'Value': 'string'
},
]
},
'UserMetadata': [
{
'Name': 'string',
'Value': 'string'
},
],
'StorageClass': 'STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR'
}
}
},
RequestPayer='requester',
ExpectedBucketOwner='string'
)
string
[REQUIRED]
The bucket name containing the object to restore.
When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.*Region*.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.
When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.*outpostID*.s3-outposts.*Region*.amazonaws.com. When using this action using S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using S3 on Outposts in the Amazon S3 User Guide.
string
[REQUIRED]
Object key for which the action was initiated.
string
VersionId used to reference a specific version of the object.
dict
Container for restore job parameters.
Days (integer) --
Lifetime of the active copy in days. Do not use with restores that specify OutputLocation.
The Days element is required for regular restores, and must not be provided for select requests.
GlacierJobParameters (dict) --
S3 Glacier related parameters pertaining to this job. Do not use with restores that specify OutputLocation.
Tier (string) -- [REQUIRED]
Retrieval tier at which the restore will be processed.
Type (string) --
Type of restore request.
Tier (string) --
Retrieval tier at which the restore will be processed.
Description (string) --
The optional description for the job.
SelectParameters (dict) --
Describes the parameters for Select job types.
InputSerialization (dict) -- [REQUIRED]
Describes the serialization format of the object.
CSV (dict) --
Describes the serialization of a CSV-encoded object.
FileHeaderInfo (string) --
Describes the first line of input. Valid values are:
NONE: First line is not a header.
IGNORE: First line is a header, but you can't use the header values to indicate the column in an expression. You can use column position (such as _1, _2, …) to indicate the column ( SELECT s._1 FROM OBJECT s).
Use: First line is a header, and you can use the header value to identify a column in an expression ( SELECT "name" FROM OBJECT).
Comments (string) --
A single character used to indicate that a row should be ignored when the character is present at the start of that row. You can specify any character to indicate a comment line.
QuoteEscapeCharacter (string) --
A single character used for escaping the quotation mark character inside an already escaped value. For example, the value """ a , b """ is parsed as " a , b ".
RecordDelimiter (string) --
A single character used to separate individual records in the input. Instead of the default value, you can specify an arbitrary delimiter.
FieldDelimiter (string) --
A single character used to separate individual fields in a record. You can specify an arbitrary delimiter.
QuoteCharacter (string) --
A single character used for escaping when the field delimiter is part of the value. For example, if the value is a, b, Amazon S3 wraps this field value in quotation marks, as follows: " a , b ".
Type: String
Default: "
Ancestors: CSV
AllowQuotedRecordDelimiter (boolean) --
Specifies that CSV field values may contain quoted record delimiters and such records should be allowed. Default value is FALSE. Setting this value to TRUE may lower performance.
CompressionType (string) --
Specifies object's compression format. Valid values: NONE, GZIP, BZIP2. Default Value: NONE.
JSON (dict) --
Specifies JSON as object's input serialization format.
Type (string) --
The type of JSON. Valid values: Document, Lines.
Parquet (dict) --
Specifies Parquet as object's input serialization format.
ExpressionType (string) -- [REQUIRED]
The type of the provided expression (for example, SQL).
Expression (string) -- [REQUIRED]
The expression that is used to query the object.
OutputSerialization (dict) -- [REQUIRED]
Describes how the results of the Select job are serialized.
CSV (dict) --
Describes the serialization of CSV-encoded Select results.
QuoteFields (string) --
Indicates whether to use quotation marks around output fields.
ALWAYS: Always use quotation marks for output fields.
ASNEEDED: Use quotation marks for output fields when needed.
QuoteEscapeCharacter (string) --
The single character used for escaping the quote character inside an already escaped value.
RecordDelimiter (string) --
A single character used to separate individual records in the output. Instead of the default value, you can specify an arbitrary delimiter.
FieldDelimiter (string) --
The value used to separate individual fields in a record. You can specify an arbitrary delimiter.
QuoteCharacter (string) --
A single character used for escaping when the field delimiter is part of the value. For example, if the value is a, b, Amazon S3 wraps this field value in quotation marks, as follows: " a , b ".
JSON (dict) --
Specifies JSON as request's output serialization format.
RecordDelimiter (string) --
The value used to separate individual records in the output. If no value is specified, Amazon S3 uses a newline character ('n').
OutputLocation (dict) --
Describes the location where the restore job's output is stored.
S3 (dict) --
Describes an S3 location that will receive the results of the restore request.
BucketName (string) -- [REQUIRED]
The name of the bucket where the restore results will be placed.
Prefix (string) -- [REQUIRED]
The prefix that is prepended to the restore results for this request.
Encryption (dict) --
Contains the type of server-side encryption used.
EncryptionType (string) -- [REQUIRED]
The server-side encryption algorithm used when storing job results in Amazon S3 (for example, AES256, aws:kms).
KMSKeyId (string) --
If the encryption type is aws:kms, this optional value specifies the ID of the symmetric customer managed key to use for encryption of job results. Amazon S3 only supports symmetric keys. For more information, see Using symmetric and asymmetric keys in the Amazon Web Services Key Management Service Developer Guide.
KMSContext (string) --
If the encryption type is aws:kms, this optional value can be used to specify the encryption context for the restore results.
CannedACL (string) --
The canned ACL to apply to the restore results.
AccessControlList (list) --
A list of grants that control access to the staged results.
(dict) --
Container for grant information.
Grantee (dict) --
The person being granted permissions.
DisplayName (string) --
Screen name of the grantee.
EmailAddress (string) --
Email address of the grantee.
ID (string) --
The canonical user ID of the grantee.
Type (string) -- [REQUIRED]
Type of grantee
URI (string) --
URI of the grantee group.
Permission (string) --
Specifies the permission given to the grantee.
Tagging (dict) --
The tag-set that is applied to the restore results.
TagSet (list) -- [REQUIRED]
A collection for a set of tags
(dict) --
A container of a key value name pair.
Key (string) -- [REQUIRED]
Name of the object key.
Value (string) -- [REQUIRED]
Value of the tag.
UserMetadata (list) --
A list of metadata to store with the restore results in S3.
(dict) --
A metadata key-value pair to store with an object.
Name (string) --
Name of the Object.
Value (string) --
Value of the Object.
StorageClass (string) --
The class of storage used to store the restore results.
string
Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from requester pays buckets, see Downloading Objects in Requestor Pays Buckets in the Amazon S3 User Guide.
string
The account ID of the expected bucket owner. If the bucket is owned by a different account, the request will fail with an HTTP 403 (Access Denied) error.
dict
Response Syntax
{
'RequestCharged': 'requester',
'RestoreOutputPath': 'string'
}
Response Structure
(dict) --
RequestCharged (string) --
If present, indicates that the requester was successfully charged for the request.
RestoreOutputPath (string) --
Indicates the path in the provided S3 output location where Select results will be restored to.
{'StorageClass': {'GLACIER_IR'}}
Passes transformed objects to a GetObject operation when using Object Lambda access points. For information about Object Lambda access points, see Transforming objects with Object Lambda access points in the Amazon S3 User Guide.
This operation supports metadata that can be returned by GetObject, in addition to RequestRoute, RequestToken, StatusCode, ErrorCode, and ErrorMessage. The GetObject response metadata is supported so that the WriteGetObjectResponse caller, typically an Lambda function, can provide the same metadata when it internally invokes GetObject. When WriteGetObjectResponse is called by a customer-owned Lambda function, the metadata returned to the end user GetObject call might differ from what Amazon S3 would normally return.
You can include any number of metadata headers. When including a metadata header, it should be prefaced with x-amz-meta. For example, x-amz-meta-my-custom-header: MyCustomValue. The primary use case for this is to forward GetObject metadata.
Amazon Web Services provides some prebuilt Lambda functions that you can use with S3 Object Lambda to detect and redact personally identifiable information (PII) and decompress S3 objects. These Lambda functions are available in the Amazon Web Services Serverless Application Repository, and can be selected through the Amazon Web Services Management Console when you create your Object Lambda access point.
Example 1: PII Access Control - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically detects personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.
Example 2: PII Redaction - This Lambda function uses Amazon Comprehend, a natural language processing (NLP) service using machine learning to find insights and relationships in text. It automatically redacts personally identifiable information (PII) such as names, addresses, dates, credit card numbers, and social security numbers from documents in your Amazon S3 bucket.
Example 3: Decompression - The Lambda function S3ObjectLambdaDecompression, is equipped to decompress objects stored in S3 in one of six compressed file formats including bzip2, gzip, snappy, zlib, zstandard and ZIP.
For information on how to view and use these functions, see Using Amazon Web Services built Lambda functions in the Amazon S3 User Guide.
See also: AWS API Documentation
Request Syntax
client.write_get_object_response(
RequestRoute='string',
RequestToken='string',
Body=b'bytes'|file,
StatusCode=123,
ErrorCode='string',
ErrorMessage='string',
AcceptRanges='string',
CacheControl='string',
ContentDisposition='string',
ContentEncoding='string',
ContentLanguage='string',
ContentLength=123,
ContentRange='string',
ContentType='string',
DeleteMarker=True|False,
ETag='string',
Expires=datetime(2015, 1, 1),
Expiration='string',
LastModified=datetime(2015, 1, 1),
MissingMeta=123,
Metadata={
'string': 'string'
},
ObjectLockMode='GOVERNANCE'|'COMPLIANCE',
ObjectLockLegalHoldStatus='ON'|'OFF',
ObjectLockRetainUntilDate=datetime(2015, 1, 1),
PartsCount=123,
ReplicationStatus='COMPLETE'|'PENDING'|'FAILED'|'REPLICA',
RequestCharged='requester',
Restore='string',
ServerSideEncryption='AES256'|'aws:kms',
SSECustomerAlgorithm='string',
SSEKMSKeyId='string',
SSECustomerKeyMD5='string',
StorageClass='STANDARD'|'REDUCED_REDUNDANCY'|'STANDARD_IA'|'ONEZONE_IA'|'INTELLIGENT_TIERING'|'GLACIER'|'DEEP_ARCHIVE'|'OUTPOSTS'|'GLACIER_IR',
TagCount=123,
VersionId='string',
BucketKeyEnabled=True|False
)
string
[REQUIRED]
Route prefix to the HTTP URL generated.
string
[REQUIRED]
A single use encrypted token that maps WriteGetObjectResponse to the end user GetObject request.
bytes or seekable file-like object
The object data.
integer
The integer status code for an HTTP response of a corresponding GetObject request.
Status Codes
200 - OK
206 - Partial Content
304 - Not Modified
400 - Bad Request
401 - Unauthorized
403 - Forbidden
404 - Not Found
405 - Method Not Allowed
409 - Conflict
411 - Length Required
412 - Precondition Failed
416 - Range Not Satisfiable
500 - Internal Server Error
503 - Service Unavailable
string
A string that uniquely identifies an error condition. Returned in the <Code> tag of the error XML response for a corresponding GetObject call. Cannot be used with a successful StatusCode header or when the transformed object is provided in the body. All error codes from S3 are sentence-cased. Regex value is "^[A-Z][a-zA-Z]+$".
string
Contains a generic description of the error condition. Returned in the <Message> tag of the error XML response for a corresponding GetObject call. Cannot be used with a successful StatusCode header or when the transformed object is provided in body.
string
Indicates that a range of bytes was specified.
string
Specifies caching behavior along the request/reply chain.
string
Specifies presentational information for the object.
string
Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.
string
The language the content is in.
integer
The size of the content body in bytes.
string
The portion of the object returned in the response.
string
A standard MIME type describing the format of the object data.
boolean
Specifies whether an object stored in Amazon S3 is ( true) or is not ( false) a delete marker.
string
An opaque identifier assigned by a web server to a specific version of a resource found at a URL.
datetime
The date and time at which the object is no longer cacheable.
string
If object stored in Amazon S3 expiration is configured (see PUT Bucket lifecycle) it includes expiry-date and rule-id key-value pairs providing object expiration information. The value of the rule-id is URL encoded.
datetime
The date and time that the object was last modified.
integer
Set to the number of metadata entries not returned in x-amz-meta headers. This can happen if you create metadata using an API like SOAP that supports more flexible metadata than the REST API. For example, using SOAP, you can create metadata whose values are not legal HTTP headers.
dict
A map of metadata to store with the object in S3.
(string) --
(string) --
string
Indicates whether an object stored in Amazon S3 has Object Lock enabled. For more information about S3 Object Lock, see Object Lock.
string
Indicates whether an object stored in Amazon S3 has an active legal hold.
datetime
The date and time when Object Lock is configured to expire.
integer
The count of parts this object has.
string
Indicates if request involves bucket that is either a source or destination in a Replication rule. For more information about S3 Replication, see Replication.
string
If present, indicates that the requester was successfully charged for the request.
string
Provides information about object restoration operation and expiration time of the restored object copy.
string
The server-side encryption algorithm used when storing requested object in Amazon S3 (for example, AES256, aws:kms).
string
Encryption algorithm used if server-side encryption with a customer-provided encryption key was specified for object stored in Amazon S3.
string
If present, specifies the ID of the Amazon Web Services Key Management Service (Amazon Web Services KMS) symmetric customer managed key that was used for stored in Amazon S3 object.
string
128-bit MD5 digest of customer-provided encryption key used in Amazon S3 to encrypt data stored in S3. For more information, see Protecting data using server-side encryption with customer-provided encryption keys (SSE-C).
string
The class of storage used to store object in Amazon S3.
integer
The number of tags, if any, on the object.
string
An ID used to reference a specific version of the object.
boolean
Indicates whether the object stored in Amazon S3 uses an S3 bucket key for server-side encryption with Amazon Web Services KMS (SSE-KMS).
None