2022/11/07 - AWS CloudTrail - 2 new 4 updated api methods
Changes This release includes support for configuring a delegated administrator to manage an AWS Organizations organization CloudTrail trails and event data stores, and AWS Key Management Service encryption of CloudTrail Lake event data stores.
Removes CloudTrail delegated administrator permissions from a member account in an organization.
See also: AWS API Documentation
Request Syntax
client.deregister_organization_delegated_admin(
DelegatedAdminAccountId='string'
)
string
[REQUIRED]
A delegated administrator account ID. This is a member account in an organization that is currently designated as a delegated administrator.
dict
Response Syntax
{}
Response Structure
(dict) --
Returns the following response if successful. Otherwise, returns an error.
Registers an organization’s member account as the CloudTrail delegated administrator.
See also: AWS API Documentation
Request Syntax
client.register_organization_delegated_admin(
MemberAccountId='string'
)
string
[REQUIRED]
An organization member account ID that you want to designate as a delegated administrator.
dict
Response Syntax
{}
Response Structure
(dict) --
Returns the following response if successful. Otherwise, returns an error.
{'KmsKeyId': 'string'}
Creates a new event data store.
See also: AWS API Documentation
Request Syntax
client.create_event_data_store(
Name='string',
AdvancedEventSelectors=[
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
MultiRegionEnabled=True|False,
OrganizationEnabled=True|False,
RetentionPeriod=123,
TerminationProtectionEnabled=True|False,
TagsList=[
{
'Key': 'string',
'Value': 'string'
},
],
KmsKeyId='string'
)
string
[REQUIRED]
The name of the event data store.
list
The advanced event selectors to use to select the events for the data store. For more information about how to use advanced event selectors, see Log events by using advanced event selectors in the CloudTrail User Guide.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) -- [REQUIRED]
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) -- [REQUIRED]
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
boolean
Specifies whether the event data store includes events from all regions, or only from the region in which the event data store is created.
boolean
Specifies whether an event data store collects events logged for an organization in Organizations.
integer
The retention period of the event data store, in days. You can set a retention period of up to 2557 days, the equivalent of seven years.
boolean
Specifies whether termination protection is enabled for the event data store. If termination protection is enabled, you cannot delete the event data store until termination protection is disabled.
list
A list of tags.
(dict) --
A custom key-value pair associated with a resource such as a CloudTrail trail.
Key (string) -- [REQUIRED]
The key in a key-value pair. The key must be must be no longer than 128 Unicode characters. The key must be unique for the resource to which it applies.
Value (string) --
The value in a key-value pair of a tag. The value must be no longer than 256 Unicode characters.
string
Specifies the KMS key ID to use to encrypt the events delivered by CloudTrail. The value can be an alias name prefixed by alias/ , a fully specified ARN to an alias, a fully specified ARN to a key, or a globally unique identifier.
Warning
Disabling or deleting the KMS key, or removing CloudTrail permissions on the key, prevents CloudTrail from logging events to the event data store, and prevents users from querying the data in the event data store that was encrypted with the key. After you associate an event data store with a KMS key, the KMS key cannot be removed or changed. Before you disable or delete a KMS key that you are using with an event data store, delete or back up your event data store.
CloudTrail also supports KMS multi-Region keys. For more information about multi-Region keys, see Using multi-Region keys in the Key Management Service Developer Guide .
Examples:
alias/MyAliasName
arn:aws:kms:us-east-2:123456789012:alias/MyAliasName
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
12345678-1234-1234-1234-123456789012
dict
Response Syntax
{
'EventDataStoreArn': 'string',
'Name': 'string',
'Status': 'CREATED'|'ENABLED'|'PENDING_DELETION',
'AdvancedEventSelectors': [
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
'MultiRegionEnabled': True|False,
'OrganizationEnabled': True|False,
'RetentionPeriod': 123,
'TerminationProtectionEnabled': True|False,
'TagsList': [
{
'Key': 'string',
'Value': 'string'
},
],
'CreatedTimestamp': datetime(2015, 1, 1),
'UpdatedTimestamp': datetime(2015, 1, 1),
'KmsKeyId': 'string'
}
Response Structure
(dict) --
EventDataStoreArn (string) --
The ARN of the event data store.
Name (string) --
The name of the event data store.
Status (string) --
The status of event data store creation.
AdvancedEventSelectors (list) --
The advanced event selectors that were used to select the events for the data store.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) --
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) --
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
MultiRegionEnabled (boolean) --
Indicates whether the event data store collects events from all regions, or only from the region in which it was created.
OrganizationEnabled (boolean) --
Indicates whether an event data store is collecting logged events for an organization in Organizations.
RetentionPeriod (integer) --
The retention period of an event data store, in days.
TerminationProtectionEnabled (boolean) --
Indicates whether termination protection is enabled for the event data store.
TagsList (list) --
A list of tags.
(dict) --
A custom key-value pair associated with a resource such as a CloudTrail trail.
Key (string) --
The key in a key-value pair. The key must be must be no longer than 128 Unicode characters. The key must be unique for the resource to which it applies.
Value (string) --
The value in a key-value pair of a tag. The value must be no longer than 256 Unicode characters.
CreatedTimestamp (datetime) --
The timestamp that shows when the event data store was created.
UpdatedTimestamp (datetime) --
The timestamp that shows when an event data store was updated, if applicable. UpdatedTimestamp is always either the same or newer than the time shown in CreatedTimestamp .
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the events delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the following format.
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
{'KmsKeyId': 'string'}
Returns information about an event data store specified as either an ARN or the ID portion of the ARN.
See also: AWS API Documentation
Request Syntax
client.get_event_data_store(
EventDataStore='string'
)
string
[REQUIRED]
The ARN (or ID suffix of the ARN) of the event data store about which you want information.
dict
Response Syntax
{
'EventDataStoreArn': 'string',
'Name': 'string',
'Status': 'CREATED'|'ENABLED'|'PENDING_DELETION',
'AdvancedEventSelectors': [
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
'MultiRegionEnabled': True|False,
'OrganizationEnabled': True|False,
'RetentionPeriod': 123,
'TerminationProtectionEnabled': True|False,
'CreatedTimestamp': datetime(2015, 1, 1),
'UpdatedTimestamp': datetime(2015, 1, 1),
'KmsKeyId': 'string'
}
Response Structure
(dict) --
EventDataStoreArn (string) --
The event data store Amazon Resource Number (ARN).
Name (string) --
The name of the event data store.
Status (string) --
The status of an event data store. Values can be ENABLED and PENDING_DELETION .
AdvancedEventSelectors (list) --
The advanced event selectors used to select events for the data store.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) --
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) --
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
MultiRegionEnabled (boolean) --
Indicates whether the event data store includes events from all regions, or only from the region in which it was created.
OrganizationEnabled (boolean) --
Indicates whether an event data store is collecting logged events for an organization in Organizations.
RetentionPeriod (integer) --
The retention period of the event data store, in days.
TerminationProtectionEnabled (boolean) --
Indicates that termination protection is enabled.
CreatedTimestamp (datetime) --
The timestamp of the event data store's creation.
UpdatedTimestamp (datetime) --
Shows the time that an event data store was updated, if applicable. UpdatedTimestamp is always either the same or newer than the time shown in CreatedTimestamp .
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the events delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the following format.
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
{'KmsKeyId': 'string'}
Restores a deleted event data store specified by EventDataStore , which accepts an event data store ARN. You can only restore a deleted event data store within the seven-day wait period after deletion. Restoring an event data store can take several minutes, depending on the size of the event data store.
See also: AWS API Documentation
Request Syntax
client.restore_event_data_store(
EventDataStore='string'
)
string
[REQUIRED]
The ARN (or the ID suffix of the ARN) of the event data store that you want to restore.
dict
Response Syntax
{
'EventDataStoreArn': 'string',
'Name': 'string',
'Status': 'CREATED'|'ENABLED'|'PENDING_DELETION',
'AdvancedEventSelectors': [
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
'MultiRegionEnabled': True|False,
'OrganizationEnabled': True|False,
'RetentionPeriod': 123,
'TerminationProtectionEnabled': True|False,
'CreatedTimestamp': datetime(2015, 1, 1),
'UpdatedTimestamp': datetime(2015, 1, 1),
'KmsKeyId': 'string'
}
Response Structure
(dict) --
EventDataStoreArn (string) --
The event data store ARN.
Name (string) --
The name of the event data store.
Status (string) --
The status of the event data store.
AdvancedEventSelectors (list) --
The advanced event selectors that were used to select events.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) --
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) --
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
MultiRegionEnabled (boolean) --
Indicates whether the event data store is collecting events from all regions, or only from the region in which the event data store was created.
OrganizationEnabled (boolean) --
Indicates whether an event data store is collecting logged events for an organization in Organizations.
RetentionPeriod (integer) --
The retention period, in days.
TerminationProtectionEnabled (boolean) --
Indicates that termination protection is enabled and the event data store cannot be automatically deleted.
CreatedTimestamp (datetime) --
The timestamp of an event data store's creation.
UpdatedTimestamp (datetime) --
The timestamp that shows when an event data store was updated, if applicable. UpdatedTimestamp is always either the same or newer than the time shown in CreatedTimestamp .
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the events delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the following format.
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
{'KmsKeyId': 'string'}
Updates an event data store. The required EventDataStore value is an ARN or the ID portion of the ARN. Other parameters are optional, but at least one optional parameter must be specified, or CloudTrail throws an error. RetentionPeriod is in days, and valid values are integers between 90 and 2557. By default, TerminationProtection is enabled. AdvancedEventSelectors includes or excludes management and data events in your event data store; for more information about AdvancedEventSelectors , see PutEventSelectorsRequest$AdvancedEventSelectors.
See also: AWS API Documentation
Request Syntax
client.update_event_data_store(
EventDataStore='string',
Name='string',
AdvancedEventSelectors=[
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
MultiRegionEnabled=True|False,
OrganizationEnabled=True|False,
RetentionPeriod=123,
TerminationProtectionEnabled=True|False,
KmsKeyId='string'
)
string
[REQUIRED]
The ARN (or the ID suffix of the ARN) of the event data store that you want to update.
string
The event data store name.
list
The advanced event selectors used to select events for the event data store. You can configure up to five advanced event selectors for each event data store.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) -- [REQUIRED]
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) -- [REQUIRED]
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
boolean
Specifies whether an event data store collects events from all regions, or only from the region in which it was created.
boolean
Specifies whether an event data store collects events logged for an organization in Organizations.
integer
The retention period, in days.
boolean
Indicates that termination protection is enabled and the event data store cannot be automatically deleted.
string
Specifies the KMS key ID to use to encrypt the events delivered by CloudTrail. The value can be an alias name prefixed by alias/ , a fully specified ARN to an alias, a fully specified ARN to a key, or a globally unique identifier.
Warning
Disabling or deleting the KMS key, or removing CloudTrail permissions on the key, prevents CloudTrail from logging events to the event data store, and prevents users from querying the data in the event data store that was encrypted with the key. After you associate an event data store with a KMS key, the KMS key cannot be removed or changed. Before you disable or delete a KMS key that you are using with an event data store, delete or back up your event data store.
CloudTrail also supports KMS multi-Region keys. For more information about multi-Region keys, see Using multi-Region keys in the Key Management Service Developer Guide .
Examples:
alias/MyAliasName
arn:aws:kms:us-east-2:123456789012:alias/MyAliasName
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012
12345678-1234-1234-1234-123456789012
dict
Response Syntax
{
'EventDataStoreArn': 'string',
'Name': 'string',
'Status': 'CREATED'|'ENABLED'|'PENDING_DELETION',
'AdvancedEventSelectors': [
{
'Name': 'string',
'FieldSelectors': [
{
'Field': 'string',
'Equals': [
'string',
],
'StartsWith': [
'string',
],
'EndsWith': [
'string',
],
'NotEquals': [
'string',
],
'NotStartsWith': [
'string',
],
'NotEndsWith': [
'string',
]
},
]
},
],
'MultiRegionEnabled': True|False,
'OrganizationEnabled': True|False,
'RetentionPeriod': 123,
'TerminationProtectionEnabled': True|False,
'CreatedTimestamp': datetime(2015, 1, 1),
'UpdatedTimestamp': datetime(2015, 1, 1),
'KmsKeyId': 'string'
}
Response Structure
(dict) --
EventDataStoreArn (string) --
The ARN of the event data store.
Name (string) --
The name of the event data store.
Status (string) --
The status of an event data store. Values can be ENABLED and PENDING_DELETION .
AdvancedEventSelectors (list) --
The advanced event selectors that are applied to the event data store.
(dict) --
Advanced event selectors let you create fine-grained selectors for the following CloudTrail event record fields. They help you control costs by logging only those events that are important to you. For more information about advanced event selectors, see Logging data events for trails in the CloudTrail User Guide .
readOnly
eventSource
eventName
eventCategory
resources.type
resources.ARN
You cannot apply both event selectors and advanced event selectors to a trail.
Name (string) --
An optional, descriptive name for an advanced event selector, such as "Log data events for only two S3 buckets".
FieldSelectors (list) --
Contains all selector statements in an advanced event selector.
(dict) --
A single selector statement in an advanced event selector.
Field (string) --
A field in an event record on which to filter events to be logged. Supported fields include readOnly , eventCategory , eventSource (for management events), eventName , resources.type , and resources.ARN .
readOnly - Optional. Can be set to Equals a value of true or false . If you do not add this field, CloudTrail logs both read and write events. A value of true logs only read events. A value of false logs only write events.
eventSource - For filtering management events only. This can be set only to NotEquals kms.amazonaws.com .
eventName - Can use any operator. You can use it to filter in or filter out any data event logged to CloudTrail, such as PutBucket or GetSnapshotBlock . You can have multiple values for this field, separated by commas.
eventCategory - This is required. It must be set to Equals , and the value must be Management or Data .
resources.type - This field is required. resources.type can only use the Equals operator, and the value can be one of the following:
AWS::S3::Object
AWS::Lambda::Function
AWS::DynamoDB::Table
AWS::S3Outposts::Object
AWS::ManagedBlockchain::Node
AWS::S3ObjectLambda::AccessPoint
AWS::EC2::Snapshot
AWS::S3::AccessPoint
AWS::DynamoDB::Stream
AWS::Glue::Table
You can have only one resources.type field per selector. To log data events on more than one resource type, add another selector.
resources.ARN - You can use any operator with resources.ARN , but if you use Equals or NotEquals , the value must exactly match the ARN of a valid resource of the type you've specified in the template as the value of resources.type. For example, if resources.type equals AWS::S3::Object , the ARN must be in one of the following formats. To log all data events for all objects in a specific S3 bucket, use the StartsWith operator, and include only the bucket ARN as the matching value. The trailing slash is intentional; do not exclude it. Replace the text between less than and greater than symbols (<>) with resource-specific information.
arn:<partition>:s3:::<bucket_name>/
arn:<partition>:s3:::<bucket_name>/<object_path>/
When resources.type equals AWS::S3::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in one of the following formats. To log events on all objects in an S3 access point, we recommend that you use only the access point ARN, don’t include the object path, and use the StartsWith or NotStartsWith operators.
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>
arn:<partition>:s3:<region>:<account_ID>:accesspoint/<access_point_name>/object/<object_path>
When resources.type equals AWS::Lambda::Function , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:lambda:<region>:<account_ID>:function:<function_name>
When resources.type equals AWS::DynamoDB::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>
When resources.type equals AWS::S3Outposts::Object , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-outposts:<region>:<account_ID>:<object_path>
When resources.type equals AWS::ManagedBlockchain::Node , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:managedblockchain:<region>:<account_ID>:nodes/<node_ID>
When resources.type equals AWS::S3ObjectLambda::AccessPoint , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:s3-object-lambda:<region>:<account_ID>:accesspoint/<access_point_name>
When resources.type equals AWS::EC2::Snapshot , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:ec2:<region>::snapshot/<snapshot_ID>
When resources.type equals AWS::DynamoDB::Stream , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:dynamodb:<region>:<account_ID>:table/<table_name>/stream/<date_time>
When resources.type equals AWS::Glue::Table , and the operator is set to Equals or NotEquals , the ARN must be in the following format:
arn:<partition>:glue:<region>:<account_ID>:table/<database_name>/<table_name>
Equals (list) --
An operator that includes events that match the exact value of the event record field specified as the value of Field . This is the only valid operator that you can use with the readOnly , eventCategory , and resources.type fields.
(string) --
StartsWith (list) --
An operator that includes events that match the first few characters of the event record field specified as the value of Field .
(string) --
EndsWith (list) --
An operator that includes events that match the last few characters of the event record field specified as the value of Field .
(string) --
NotEquals (list) --
An operator that excludes events that match the exact value of the event record field specified as the value of Field .
(string) --
NotStartsWith (list) --
An operator that excludes events that match the first few characters of the event record field specified as the value of Field .
(string) --
NotEndsWith (list) --
An operator that excludes events that match the last few characters of the event record field specified as the value of Field .
(string) --
MultiRegionEnabled (boolean) --
Indicates whether the event data store includes events from all regions, or only from the region in which it was created.
OrganizationEnabled (boolean) --
Indicates whether an event data store is collecting logged events for an organization in Organizations.
RetentionPeriod (integer) --
The retention period, in days.
TerminationProtectionEnabled (boolean) --
Indicates whether termination protection is enabled for the event data store.
CreatedTimestamp (datetime) --
The timestamp that shows when an event data store was first created.
UpdatedTimestamp (datetime) --
The timestamp that shows when the event data store was last updated. UpdatedTimestamp is always either the same or newer than the time shown in CreatedTimestamp .
KmsKeyId (string) --
Specifies the KMS key ID that encrypts the events delivered by CloudTrail. The value is a fully specified ARN to a KMS key in the following format.
arn:aws:kms:us-east-2:123456789012:key/12345678-1234-1234-1234-123456789012