2016/09/27 - AWS CloudFormation - 6 updated api methods
Changes Adds support for specifying an IAM service role for CloudFormation stack operations.
{'RoleARN': 'string'}
For a specified stack that is in the UPDATE_ROLLBACK_FAILED state, continues rolling it back to the UPDATE_ROLLBACK_COMPLETE state. Depending on the cause of the failure, you can manually fix the error and continue the rollback. By continuing the rollback, you can return your stack to a working state (the UPDATE_ROLLBACK_COMPLETE state), and then try to update the stack again.
A stack goes into the UPDATE_ROLLBACK_FAILED state when AWS CloudFormation cannot roll back all changes after a failed stack update. For example, you might have a stack that is rolling back to an old database instance that was deleted outside of AWS CloudFormation. Because AWS CloudFormation doesn't know the database was deleted, it assumes that the database instance still exists and attempts to roll back to it, causing the update rollback to fail.
Request Syntax
client.continue_update_rollback(
StackName='string',
RoleARN='string'
)
string
[REQUIRED]
The name or the unique ID of the stack that you want to continue rolling back.
string
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to roll back the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
dict
Response Syntax
{}
Response Structure
(dict) --
The output for a ContinueUpdateRollback action.
{'RoleARN': 'string'}
Creates a list of changes for a stack. AWS CloudFormation generates the change set by comparing the stack's information with the information that you submit. A change set can help you understand which resources AWS CloudFormation will change and how it will change them before you update your stack. Change sets allow you to check before you make a change so that you don't delete or replace critical resources.
AWS CloudFormation doesn't make any changes to the stack when you create a change set. To make the specified changes, you must execute the change set by using the ExecuteChangeSet action.
After the call successfully completes, AWS CloudFormation starts creating the change set. To check the status of the change set, use the DescribeChangeSet action.
Request Syntax
client.create_change_set(
StackName='string',
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM',
],
ResourceTypes=[
'string',
],
RoleARN='string',
NotificationARNs=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
ChangeSetName='string',
ClientToken='string',
Description='string'
)
string
[REQUIRED]
The name or the unique ID of the stack for which you are creating a change set. AWS CloudFormation generates the change set by comparing this stack's information with the information that you submit, such as a modified template or different parameter input values.
string
A structure that contains the body of the revised template, with a minimum length of 1 byte and a maximum length of 51,200 bytes. AWS CloudFormation generates the change set by comparing this template with the template of the stack that you specified.
Conditional: You must specify only TemplateBody or TemplateURL .
string
The location of the file that contains the revised template. The URL must point to a template (max size: 460,800 bytes) that is located in an S3 bucket. AWS CloudFormation generates the change set by comparing this template with the stack that you specified.
Conditional: You must specify only TemplateBody or TemplateURL .
boolean
Whether to reuse the template that is associated with the stack to create the change set.
list
A list of Parameter structures that specify input parameters for the change set. For more information, see the Parameter data type.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
list
A list of values that you must specify before AWS CloudFormation can update certain stacks. Some stack templates might include resources that can affect permissions in your AWS account, for example, by creating new AWS Identity and Access Management (IAM) users. For those stacks, you must explicitly acknowledge their capabilities by specifying this parameter.
The only valid values are CAPABILITY_IAM and CAPABILITY_NAMED_IAM . The following resources require you to specify this parameter: AWS::IAM::AccessKey, AWS::IAM::Group, AWS::IAM::InstanceProfile, AWS::IAM::Policy, AWS::IAM::Role, AWS::IAM::User, and AWS::IAM::UserToGroupAddition. If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
If you have IAM resources, you can specify either capability. If you have IAM resources with custom names, you must specify CAPABILITY_NAMED_IAM . If you don't specify this parameter, this action returns an InsufficientCapabilities error.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates.
(string) --
list
The template resource types that you have permissions to work with if you execute this change set, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .
If the list of resource types doesn't include a resource type that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for condition keys in IAM policies for AWS CloudFormation. For more information, see Controlling Access with AWS Identity and Access Management in the AWS CloudFormation User Guide.
(string) --
string
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes when executing the change set. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
list
The Amazon Resource Names (ARNs) of Amazon Simple Notification Service (Amazon SNS) topics that AWS CloudFormation associates with the stack. To remove all associated notification topics, specify an empty list.
(string) --
list
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to resources in the stack. You can specify a maximum of 10 tags.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
string
[REQUIRED]
The name of the change set. The name must be unique among all change sets that are associated with the specified stack.
A change set name can contain only alphanumeric, case sensitive characters and hyphens. It must start with an alphabetic character and cannot exceed 128 characters.
string
A unique identifier for this CreateChangeSet request. Specify this token if you plan to retry requests so that AWS CloudFormation knows that you're not attempting to create another change set with the same name. You might retry CreateChangeSet requests to ensure that AWS CloudFormation successfully received them.
string
A description to help you identify this change set.
dict
Response Syntax
{
'Id': 'string'
}
Response Structure
(dict) --
The output for the CreateChangeSet action.
Id (string) --
The Amazon Resource Name (ARN) of the change set.
{'RoleARN': 'string'}
Creates a stack as specified in the template. After the call completes successfully, the stack creation starts. You can check the status of the stack via the DescribeStacks API.
Request Syntax
client.create_stack(
StackName='string',
TemplateBody='string',
TemplateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False
},
],
DisableRollback=True|False,
TimeoutInMinutes=123,
NotificationARNs=[
'string',
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM',
],
ResourceTypes=[
'string',
],
RoleARN='string',
OnFailure='DO_NOTHING'|'ROLLBACK'|'DELETE',
StackPolicyBody='string',
StackPolicyURL='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
string
[REQUIRED]
The name that is associated with the stack. The name must be unique in the region in which you are creating the stack.
Note
A stack name can contain only alphanumeric characters (case sensitive) and hyphens. It must start with an alphabetic character and cannot be longer than 128 characters.
string
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
string
Location of file containing the template body. The URL must point to a template (max size: 460,800 bytes) that is located in an Amazon S3 bucket. For more information, go to the Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
list
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
boolean
Set to true to disable rollback of the stack if stack creation failed. You can specify either DisableRollback or OnFailure , but not both.
Default: false
integer
The amount of time that can pass before the stack status becomes CREATE_FAILED; if DisableRollback is not set or is set to false , the stack will be rolled back.
list
The Simple Notification Service (SNS) topic ARNs to publish stack related events. You can find your SNS topic ARNs using the SNS console or your Command Line Interface (CLI).
(string) --
list
A list of values that you must specify before AWS CloudFormation can create certain stacks. Some stack templates might include resources that can affect permissions in your AWS account, for example, by creating new AWS Identity and Access Management (IAM) users. For those stacks, you must explicitly acknowledge their capabilities by specifying this parameter.
The only valid values are CAPABILITY_IAM and CAPABILITY_NAMED_IAM . The following resources require you to specify this parameter: AWS::IAM::AccessKey, AWS::IAM::Group, AWS::IAM::InstanceProfile, AWS::IAM::Policy, AWS::IAM::Role, AWS::IAM::User, and AWS::IAM::UserToGroupAddition. If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
If you have IAM resources, you can specify either capability. If you have IAM resources with custom names, you must specify CAPABILITY_NAMED_IAM . If you don't specify this parameter, this action returns an InsufficientCapabilities error.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates.
(string) --
list
The template resource types that you have permissions to work with for this create stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance . Use the following syntax to describe template resource types: AWS::* (for all AWS resource), Custom::* (for all custom resources), Custom::logical_ID (for a specific custom resource), AWS::service_name::* (for all resources of a particular AWS service), and AWS::service_name::resource_logical_ID (for a specific AWS resource).
If the list of resource types doesn't include a resource that you're creating, the stack creation fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management.
(string) --
string
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to create the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
string
Determines what action will be taken if stack creation fails. This must be one of: DO_NOTHING, ROLLBACK, or DELETE. You can specify either OnFailure or DisableRollback , but not both.
Default: ROLLBACK
string
Structure containing the stack policy body. For more information, go to Prevent Updates to Stack Resources in the AWS CloudFormation User Guide . You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
string
Location of a file containing the stack policy. The URL must point to a policy (maximum size: 16 KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
list
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to the resources created in the stack. A maximum number of 10 tags can be specified.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
The output for a CreateStack action.
StackId (string) --
Unique identifier of the stack.
{'RoleARN': 'string'}
Deletes a specified stack. Once the call completes successfully, stack deletion starts. Deleted stacks do not show up in the DescribeStacks API if the deletion has been completed successfully.
Request Syntax
client.delete_stack(
StackName='string',
RetainResources=[
'string',
],
RoleARN='string'
)
string
[REQUIRED]
The name or the unique stack ID that is associated with the stack.
list
For stacks in the DELETE_FAILED state, a list of resource logical IDs that are associated with the resources you want to retain. During deletion, AWS CloudFormation deletes the stack but does not delete the retained resources.
Retaining resources is useful when you cannot delete a resource, such as a non-empty S3 bucket, but you want to delete the stack.
(string) --
string
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to delete the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
None
{'Stacks': {'RoleARN': 'string'}}
Returns the description for the specified stack; if no stack name was specified, then it returns the description for all the stacks created.
Note
If the stack does not exist, an AmazonCloudFormationException is returned.
Request Syntax
client.describe_stacks(
StackName='string',
NextToken='string'
)
string
The name or the unique stack ID that is associated with the stack, which are not always interchangeable:
Running stacks: You can specify either the stack's name or its unique stack ID.
Deleted stacks: You must specify the unique stack ID.
Default: There is no default value.
string
A string that identifies the next page of stacks that you want to retrieve.
dict
Response Syntax
{
'Stacks': [
{
'StackId': 'string',
'StackName': 'string',
'Description': 'string',
'Parameters': [
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False
},
],
'CreationTime': datetime(2015, 1, 1),
'LastUpdatedTime': datetime(2015, 1, 1),
'StackStatus': 'CREATE_IN_PROGRESS'|'CREATE_FAILED'|'CREATE_COMPLETE'|'ROLLBACK_IN_PROGRESS'|'ROLLBACK_FAILED'|'ROLLBACK_COMPLETE'|'DELETE_IN_PROGRESS'|'DELETE_FAILED'|'DELETE_COMPLETE'|'UPDATE_IN_PROGRESS'|'UPDATE_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_COMPLETE'|'UPDATE_ROLLBACK_IN_PROGRESS'|'UPDATE_ROLLBACK_FAILED'|'UPDATE_ROLLBACK_COMPLETE_CLEANUP_IN_PROGRESS'|'UPDATE_ROLLBACK_COMPLETE',
'StackStatusReason': 'string',
'DisableRollback': True|False,
'NotificationARNs': [
'string',
],
'TimeoutInMinutes': 123,
'Capabilities': [
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM',
],
'Outputs': [
{
'OutputKey': 'string',
'OutputValue': 'string',
'Description': 'string'
},
],
'RoleARN': 'string',
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
The output for a DescribeStacks action.
Stacks (list) --
A list of stack structures.
(dict) --
The Stack data type.
StackId (string) --
Unique identifier of the stack.
StackName (string) --
The name associated with the stack.
Description (string) --
A user-defined description associated with the stack.
Parameters (list) --
A list of Parameter structures.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
CreationTime (datetime) --
The time at which the stack was created.
LastUpdatedTime (datetime) --
The time the stack was last updated. This field will only be returned if the stack has been updated at least once.
StackStatus (string) --
Current status of the stack.
StackStatusReason (string) --
Success/failure message associated with the stack status.
DisableRollback (boolean) --
Boolean to enable or disable rollback on stack creation failures:
true : disable rollback
false : enable rollback
NotificationARNs (list) --
SNS topic ARNs to which stack related events are published.
(string) --
TimeoutInMinutes (integer) --
The amount of time within which stack creation should complete.
Capabilities (list) --
The capabilities allowed in the stack.
(string) --
Outputs (list) --
A list of output structures.
(dict) --
The Output data type.
OutputKey (string) --
The key associated with the output.
OutputValue (string) --
The value associated with the output.
Description (string) --
User defined description associated with the output.
RoleARN (string) --
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that is associated with the stack. During a stack operation, AWS CloudFormation uses this role's credentials to make calls on your behalf.
Tags (list) --
A list of Tag s that specify information about the stack.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
NextToken (string) --
If the output exceeds 1 MB in size, a string that identifies the next page of stacks. If no additional page exists, this value is null.
{'RoleARN': 'string'}
Updates a stack as specified in the template. After the call completes successfully, the stack update starts. You can check the status of the stack via the DescribeStacks action.
To get a copy of the template for an existing stack, you can use the GetTemplate action.
For more information about creating an update template, updating a stack, and monitoring the progress of the update, see Updating a Stack.
Request Syntax
client.update_stack(
StackName='string',
TemplateBody='string',
TemplateURL='string',
UsePreviousTemplate=True|False,
StackPolicyDuringUpdateBody='string',
StackPolicyDuringUpdateURL='string',
Parameters=[
{
'ParameterKey': 'string',
'ParameterValue': 'string',
'UsePreviousValue': True|False
},
],
Capabilities=[
'CAPABILITY_IAM'|'CAPABILITY_NAMED_IAM',
],
ResourceTypes=[
'string',
],
RoleARN='string',
StackPolicyBody='string',
StackPolicyURL='string',
NotificationARNs=[
'string',
],
Tags=[
{
'Key': 'string',
'Value': 'string'
},
]
)
string
[REQUIRED]
The name or unique stack ID of the stack to update.
string
Structure containing the template body with a minimum length of 1 byte and a maximum length of 51,200 bytes. (For more information, go to Template Anatomy in the AWS CloudFormation User Guide.)
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
string
Location of file containing the template body. The URL must point to a template that is located in an Amazon S3 bucket. For more information, go to Template Anatomy in the AWS CloudFormation User Guide.
Conditional: You must specify either the TemplateBody or the TemplateURL parameter, but not both.
boolean
Reuse the existing template that is associated with the stack that you are updating.
string
Structure containing the temporary overriding stack policy body. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
string
Location of a file containing the temporary overriding stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyDuringUpdateBody or the StackPolicyDuringUpdateURL parameter, but not both.
If you want to update protected resources, specify a temporary overriding stack policy during this update. If you do not specify a stack policy, the current policy that is associated with the stack will be used.
list
A list of Parameter structures that specify input parameters for the stack. For more information, see the Parameter data type.
(dict) --
The Parameter data type.
ParameterKey (string) --
The key associated with the parameter. If you don't specify a key and value for a particular parameter, AWS CloudFormation uses the default value that is specified in your template.
ParameterValue (string) --
The value associated with the parameter.
UsePreviousValue (boolean) --
During a stack update, use the existing parameter value that the stack is using for a given parameter key. If you specify true , do not specify a parameter value.
list
A list of values that you must specify before AWS CloudFormation can update certain stacks. Some stack templates might include resources that can affect permissions in your AWS account, for example, by creating new AWS Identity and Access Management (IAM) users. For those stacks, you must explicitly acknowledge their capabilities by specifying this parameter.
The only valid values are CAPABILITY_IAM and CAPABILITY_NAMED_IAM . The following resources require you to specify this parameter: AWS::IAM::AccessKey, AWS::IAM::Group, AWS::IAM::InstanceProfile, AWS::IAM::Policy, AWS::IAM::Role, AWS::IAM::User, and AWS::IAM::UserToGroupAddition. If your stack template contains these resources, we recommend that you review all permissions associated with them and edit their permissions if necessary.
If you have IAM resources, you can specify either capability. If you have IAM resources with custom names, you must specify CAPABILITY_NAMED_IAM . If you don't specify this parameter, this action returns an InsufficientCapabilities error.
For more information, see Acknowledging IAM Resources in AWS CloudFormation Templates.
(string) --
list
The template resource types that you have permissions to work with for this update stack action, such as AWS::EC2::Instance , AWS::EC2::* , or Custom::MyCustomInstance .
If the list of resource types doesn't include a resource that you're updating, the stack update fails. By default, AWS CloudFormation grants permissions to all resource types. AWS Identity and Access Management (IAM) uses this parameter for AWS CloudFormation-specific condition keys in IAM policies. For more information, see Controlling Access with AWS Identity and Access Management.
(string) --
string
The Amazon Resource Name (ARN) of an AWS Identity and Access Management (IAM) role that AWS CloudFormation assumes to update the stack. AWS CloudFormation uses the role's credentials to make calls on your behalf. AWS CloudFormation always uses this role for all future operations on the stack. As long as users have permission to operate on the stack, AWS CloudFormation uses this role even if the users don't have permission to pass it. Ensure that the role grants least privilege.
If you don't specify a value, AWS CloudFormation uses the role that was previously associated with the stack. If no role is available, AWS CloudFormation uses a temporary session that is generated from your user credentials.
string
Structure containing a new stack policy body. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
string
Location of a file containing the updated stack policy. The URL must point to a policy (max size: 16KB) located in an S3 bucket in the same region as the stack. You can specify either the StackPolicyBody or the StackPolicyURL parameter, but not both.
You might update the stack policy, for example, in order to protect a new resource that you created during a stack update. If you do not specify a stack policy, the current policy that is associated with the stack is unchanged.
list
Amazon Simple Notification Service topic Amazon Resource Names (ARNs) that AWS CloudFormation associates with the stack. Specify an empty list to remove all notification topics.
(string) --
list
Key-value pairs to associate with this stack. AWS CloudFormation also propagates these tags to supported resources in the stack. You can specify a maximum number of 10 tags.
If you don't specify this parameter, AWS CloudFormation doesn't modify the stack's tags. If you specify an empty value, AWS CloudFormation removes all associated tags.
(dict) --
The Tag type enables you to specify a key-value pair that can be used to store information about an AWS CloudFormation stack.
Key (string) --
Required . A string used to identify this tag. You can specify a maximum of 128 characters for a tag key. Tags owned by Amazon Web Services (AWS) have the reserved prefix: aws: .
Value (string) --
Required . A string containing the value for this tag. You can specify a maximum of 256 characters for a tag value.
dict
Response Syntax
{
'StackId': 'string'
}
Response Structure
(dict) --
The output for an UpdateStack action.
StackId (string) --
Unique identifier of the stack.