2017/02/17 - AWS Direct Connect - 11 new12 updated api methods
Changes Update directconnect client to latest version
Creates a new link aggregation group (LAG) with the specified number of bundled physical connections between the customer network and a specific AWS Direct Connect location. A LAG is a logical interface that uses the Link Aggregation Control Protocol (LACP) to aggregate multiple 1 gigabit or 10 gigabit interfaces, allowing you to treat them as a single interface.
All connections in a LAG must use the same bandwidth (for example, 10 Gbps), and must terminate at the same AWS Direct Connect endpoint.
You can have up to 10 connections per LAG. Regardless of this limit, if you request more connections for the LAG than AWS Direct Connect can allocate on a single endpoint, no LAG is created.
You can specify an existing physical connection or interconnect to include in the LAG (which counts towards the total number of connections). Doing so interrupts the current physical connection or hosted connections, and re-establishes them as a member of the LAG. The LAG will be created on the same AWS Direct Connect endpoint to which the connection terminates. Any virtual interfaces associated with the connection are automatically disassociated and re-associated with the LAG. The connection ID does not change.
If the AWS account used to create a LAG is a registered AWS Direct Connect partner, the LAG is automatically enabled to host sub-connections. For a LAG owned by a partner, any associated virtual interfaces cannot be directly configured.
See also: AWS API Documentation
Request Syntax
client.create_lag(
numberOfConnections=123,
location='string',
connectionsBandwidth='string',
lagName='string',
connectionId='string'
)
integer
[REQUIRED]
The number of physical connections initially provisioned and bundled by the LAG.
Default: None
string
[REQUIRED]
The AWS Direct Connect location in which the LAG should be allocated.
Example: EqSV5
Default: None
string
[REQUIRED]
The bandwidth of the individual physical connections bundled by the LAG.
Default: None
Available values: 1Gbps, 10Gbps
string
[REQUIRED]
The name of the LAG.
Example: " 3x10G LAG to AWS"
Default: None
string
The ID of an existing connection to migrate to the LAG.
Default: None
dict
Response Syntax
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
Requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
Pending: The LAG has been approved, and is being initialized.
Available: The network link is established, and the LAG is ready for use.
Down: The network link is down.
Deleting: The LAG is in the process of being deleted.
Deleted: The LAG has been deleted.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down. This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an interconnect.
If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
See also: AWS API Documentation
Request Syntax
client.disassociate_connection_from_lag(
connectionId='string',
lagId='string'
)
string
[REQUIRED]
The ID of the connection to disassociate from the LAG.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the LAG.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group (LAG).
See also: AWS API Documentation
Request Syntax
client.describe_hosted_connections(
connectionId='string'
)
string
[REQUIRED]
The ID of the interconnect or LAG on which the hosted connections are provisioned.
Example: dxcon-abc123 or dxlag-abc123
Default: None
dict
Response Syntax
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of connections.
connections (list) --
A list of connections.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
Returns the LOA-CFA for a connection, interconnect, or link aggregation group (LAG).
The Letter of Authorization - Connecting Facility Assignment (LOA-CFA) is a document that is used when establishing your cross connect to AWS at the colocation facility. For more information, see Requesting Cross Connects at AWS Direct Connect Locations in the AWS Direct Connect user guide.
See also: AWS API Documentation
Request Syntax
client.describe_loa(
connectionId='string',
providerName='string',
loaContentType='application/pdf'
)
string
[REQUIRED]
The ID of a connection, LAG, or interconnect for which to get the LOA-CFA information.
Example: dxcon-abc123 or dxlag-abc123
Default: None
string
The name of the service provider who establishes connectivity on your behalf. If you supply this parameter, the LOA-CFA lists the provider name alongside your company name as the requester of the cross connect.
Default: None
string
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
dict
Response Syntax
{
'loaContent': b'bytes',
'loaContentType': 'application/pdf'
}
Response Structure
(dict) --
A structure containing the Letter of Authorization - Connecting Facility Assignment (LOA-CFA) for a connection.
loaContent (bytes) --
The binary contents of the LOA-CFA document.
loaContentType (string) --
A standard media type indicating the content type of the LOA-CFA document. Currently, the only supported value is "application/pdf".
Default: application/pdf
Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Virtual interfaces that are directly associated with the connection are not automatically migrated. You can delete them or associate them with the target LAG using AssociateVirtualInterface. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, hosted connections are not automatically migrated. You can delete them, or the owner of the physical connection can associate them with the target LAG using AssociateHostedConnection. After all hosted connections have been migrated, the interconnect can be migrated into the LAG. If the interconnect is already associated with a LAG, the hosted connections remain associated with the original LAG.
See also: AWS API Documentation
Request Syntax
client.associate_connection_with_lag(
connectionId='string',
lagId='string'
)
string
[REQUIRED]
The ID of the connection.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the LAG with which to associate the connection.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
Describes the link aggregation groups (LAGs) in your account.
If a LAG ID is provided, only information about the specified LAG is returned.
See also: AWS API Documentation
Request Syntax
client.describe_lags(
lagId='string'
)
string
The ID of the LAG.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'lags': [
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
],
'allowsHostedConnections': True|False
},
]
}
Response Structure
(dict) --
A structure containing a list of LAGs.
lags (list) --
A list of LAGs.
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
Requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
Pending: The LAG has been approved, and is being initialized.
Available: The network link is established, and the LAG is ready for use.
Down: The network link is down.
Deleting: The LAG is in the process of being deleted.
Deleted: The LAG has been deleted.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down. This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.
See also: AWS API Documentation
Request Syntax
client.associate_hosted_connection(
connectionId='string',
parentConnectionId='string'
)
string
[REQUIRED]
The ID of the hosted connection.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the interconnect or the LAG.
Example: dxcon-abc123 or dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
Updates the attributes of a link aggregation group (LAG).
You can update the following attributes:
The name of the LAG.
The value for the minimum number of connections that must be operational for the LAG itself to be operational.
When you create a LAG, the default value for the minimum number of operational connections is zero (0). If you update this value, and the number of operational connections falls below the specified value, the LAG will automatically go down to avoid overutilization of the remaining connections. Adjusting this value should be done with care as it could force the LAG down if the value is set higher than the current number of operational connections.
See also: AWS API Documentation
Request Syntax
client.update_lag(
lagId='string',
lagName='string',
minimumLinks=123
)
string
[REQUIRED]
The ID of the LAG to update.
Example: dxlag-abc123
Default: None
string
The name for the LAG.
Example: " 3x10G LAG to AWS"
Default: None
integer
The minimum number of physical connections that must be operational for the LAG itself to be operational.
Default: None
dict
Response Syntax
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
Requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
Pending: The LAG has been approved, and is being initialized.
Available: The network link is established, and the LAG is ready for use.
Down: The network link is down.
Deleting: The LAG is in the process of being deleted.
Deleted: The LAG has been deleted.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down. This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
Associates a virtual interface with a specified link aggregation group (LAG) or connection. Connectivity to AWS is temporarily interrupted as the virtual interface is being migrated. If the target connection or LAG has an associated virtual interface with a conflicting VLAN number or a conflicting IP address, the operation fails.
Virtual interfaces associated with a hosted connection cannot be associated with a LAG; hosted connections must be migrated along with their virtual interfaces using AssociateHostedConnection.
Hosted virtual interfaces (an interface for which the owner of the connection is not the owner of physical connection) can only be reassociated by the owner of the physical connection.
See also: AWS API Documentation
Request Syntax
client.associate_virtual_interface(
virtualInterfaceId='string',
connectionId='string'
)
string
[REQUIRED]
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
string
[REQUIRED]
The ID of the LAG or connection with which to associate the virtual interface.
Example: dxlag-abc123 or dxcon-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'virtualInterfaceId': 'string',
'location': 'string',
'connectionId': 'string',
'virtualInterfaceType': 'string',
'virtualInterfaceName': 'string',
'vlan': 123,
'asn': 123,
'authKey': 'string',
'amazonAddress': 'string',
'customerAddress': 'string',
'addressFamily': 'ipv4'|'ipv6',
'virtualInterfaceState': 'confirming'|'verifying'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'customerRouterConfig': 'string',
'virtualGatewayId': 'string',
'routeFilterPrefixes': [
{
'cidr': 'string'
},
],
'bgpPeers': [
{
'asn': 123,
'authKey': 'string',
'addressFamily': 'ipv4'|'ipv6',
'amazonAddress': 'string',
'customerAddress': 'string',
'bgpPeerState': 'verifying'|'pending'|'available'|'deleting'|'deleted',
'bgpStatus': 'up'|'down'
},
]
}
Response Structure
(dict) --
A virtual interface (VLAN) transmits the traffic between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new virtual interface.
virtualInterfaceId (string) --
The ID of the virtual interface.
Example: dxvif-123dfg56
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
virtualInterfaceType (string) --
The type of virtual interface.
Example: private (Amazon VPC) or public (Amazon S3, Amazon DynamoDB, and so on.)
virtualInterfaceName (string) --
The name of the virtual interface assigned by the customer.
Example: "My VPC"
vlan (integer) --
The VLAN ID.
Example: 101
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
addressFamily (string) --
Indicates the address family for the BGP peer.
ipv4: IPv4 address family
ipv6: IPv6 address family
virtualInterfaceState (string) --
State of the virtual interface.
Confirming: The creation of the virtual interface is pending confirmation from the virtual interface owner. If the owner of the virtual interface is different from the owner of the connection on which it is provisioned, then the virtual interface will remain in this state until it is confirmed by the virtual interface owner.
Verifying: This state only applies to public virtual interfaces. Each public virtual interface needs validation before the virtual interface can be created.
Pending: A virtual interface is in this state from the time that it is created until the virtual interface is ready to forward traffic.
Available: A virtual interface that is able to forward traffic.
Down: A virtual interface that is BGP down.
Deleting: A virtual interface is in this state immediately after calling DeleteVirtualInterface until it can no longer forward traffic.
Deleted: A virtual interface that cannot forward traffic.
Rejected: The virtual interface owner has declined creation of the virtual interface. If a virtual interface in the 'Confirming' state is deleted by the virtual interface owner, the virtual interface will enter the 'Rejected' state.
customerRouterConfig (string) --
Information for generating the customer router configuration.
virtualGatewayId (string) --
The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces.
Example: vgw-123er56
routeFilterPrefixes (list) --
A list of routes to be advertised to the AWS network in this region (public virtual interface).
(dict) --
A route filter prefix that the customer can advertise through Border Gateway Protocol (BGP) over a public virtual interface.
cidr (string) --
CIDR notation for the advertised route. Multiple routes are separated by commas.
IPv6 CIDRs must be at least a /64 or shorter
Example: 10.10.10.0/24,10.10.11.0/24,2001:db8::/64
bgpPeers (list) --
A list of the BGP peers configured on this virtual interface.
(dict) --
A structure containing information about a BGP peer.
asn (integer) --
The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
Example: 65000
authKey (string) --
The authentication key for BGP configuration.
Example: asdf34example
addressFamily (string) --
Indicates the address family for the BGP peer.
ipv4: IPv4 address family
ipv6: IPv6 address family
amazonAddress (string) --
IP address assigned to the Amazon interface.
Example: 192.168.1.1/30 or 2001:db8::1/125
customerAddress (string) --
IP address assigned to the customer interface.
Example: 192.168.1.2/30 or 2001:db8::2/125
bgpPeerState (string) --
The state of the BGP peer.
Verifying: The BGP peering addresses or ASN require validation before the BGP peer can be created. This state only applies to BGP peers on a public virtual interface.
Pending: The BGP peer has been created, and is in this state until it is ready to be established.
Available: The BGP peer can be established.
Deleting: The BGP peer is in the process of being deleted.
Deleted: The BGP peer has been deleted and cannot be established.
bgpStatus (string) --
The Up/Down state of the BGP peer.
Up: The BGP peer is established.
Down: The BGP peer is down.
Creates a hosted connection on an interconnect or a link aggregation group (LAG).
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or LAG.
See also: AWS API Documentation
Request Syntax
client.allocate_hosted_connection(
connectionId='string',
ownerAccount='string',
bandwidth='string',
connectionName='string',
vlan=123
)
string
[REQUIRED]
The ID of the interconnect or LAG on which the connection will be provisioned.
Example: dxcon-456abc78 or dxlag-abc123
Default: None
string
[REQUIRED]
The numeric account ID of the customer for whom the connection will be provisioned.
Example: 123443215678
Default: None
string
[REQUIRED]
The bandwidth of the connection.
Example: 500Mbps
Default: None
Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
string
[REQUIRED]
The name of the provisioned connection.
Example: " 500M Connection to AWS"
Default: None
integer
[REQUIRED]
The dedicated VLAN provisioned to the hosted connection.
Example: 101
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
Deletes a link aggregation group (LAG). You cannot delete a LAG if it has active virtual interfaces or hosted connections.
See also: AWS API Documentation
Request Syntax
client.delete_lag(
lagId='string'
)
string
[REQUIRED]
The ID of the LAG to delete.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'connectionsBandwidth': 'string',
'numberOfConnections': 123,
'lagId': 'string',
'ownerAccount': 'string',
'lagName': 'string',
'lagState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'location': 'string',
'region': 'string',
'minimumLinks': 123,
'awsDevice': 'string',
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
],
'allowsHostedConnections': True|False
}
Response Structure
(dict) --
Describes a link aggregation group (LAG). A LAG is a connection that uses the Link Aggregation Control Protocol (LACP) to logically aggregate a bundle of physical connections. Like an interconnect, it can host other connections. All connections in a LAG must terminate on the same physical AWS Direct Connect endpoint, and must be the same bandwidth.
connectionsBandwidth (string) --
The individual bandwidth of the physical connections bundled by the LAG.
Available values: 1Gbps, 10Gbps
numberOfConnections (integer) --
The number of physical connections bundled by the LAG, up to a maximum of 10.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
ownerAccount (string) --
The owner of the LAG.
lagName (string) --
The name of the LAG.
lagState (string) --
The state of the LAG.
Requested: The initial state of a LAG. The LAG stays in the requested state until the Letter of Authorization (LOA) is available.
Pending: The LAG has been approved, and is being initialized.
Available: The network link is established, and the LAG is ready for use.
Down: The network link is down.
Deleting: The LAG is in the process of being deleted.
Deleted: The LAG has been deleted.
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
minimumLinks (integer) --
The minimum number of physical connections that must be operational for the LAG itself to be operational. If the number of operational connections drops below this setting, the LAG state changes to down. This value can help to ensure that a LAG is not overutilized if a significant number of its bundled connections go down.
awsDevice (string) --
The AWS Direct Connection endpoint that hosts the LAG.
connections (list) --
A list of connections bundled by this LAG.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
allowsHostedConnections (boolean) --
Indicates whether the LAG can host other connections.
{'awsDevice': 'string', 'lagId': 'string'}
Deprecated in favor of AllocateHostedConnection.
Creates a hosted connection on an interconnect.
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect.
See also: AWS API Documentation
Request Syntax
client.allocate_connection_on_interconnect(
bandwidth='string',
connectionName='string',
ownerAccount='string',
interconnectId='string',
vlan=123
)
string
[REQUIRED]
Bandwidth of the connection.
Example: "500Mbps"
Default: None
Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
string
[REQUIRED]
Name of the provisioned connection.
Example: "500M Connection to AWS"
Default: None
string
[REQUIRED]
Numeric account Id of the customer for whom the connection will be provisioned.
Example: 123443215678
Default: None
string
[REQUIRED]
ID of the interconnect on which the connection will be provisioned.
Example: dxcon-456abc78
Default: None
integer
[REQUIRED]
The dedicated VLAN provisioned to the connection.
Example: 101
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'awsDevice': 'string', 'lagId': 'string'}
Creates a hosted connection on an interconnect or a link aggregation group (LAG).
Allocates a VLAN number and a specified amount of bandwidth for use by a hosted connection on the given interconnect or LAG.
See also: AWS API Documentation
Request Syntax
client.allocate_hosted_connection(
connectionId='string',
ownerAccount='string',
bandwidth='string',
connectionName='string',
vlan=123
)
string
[REQUIRED]
The ID of the interconnect or LAG on which the connection will be provisioned.
Example: dxcon-456abc78 or dxlag-abc123
Default: None
string
[REQUIRED]
The numeric account ID of the customer for whom the connection will be provisioned.
Example: 123443215678
Default: None
string
[REQUIRED]
The bandwidth of the connection.
Example: 500Mbps
Default: None
Values: 50Mbps, 100Mbps, 200Mbps, 300Mbps, 400Mbps, or 500Mbps
string
[REQUIRED]
The name of the provisioned connection.
Example: " 500M Connection to AWS"
Default: None
integer
[REQUIRED]
The dedicated VLAN provisioned to the hosted connection.
Example: 101
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'awsDevice': 'string', 'lagId': 'string'}
Associates an existing connection with a link aggregation group (LAG). The connection is interrupted and re-established as a member of the LAG (connectivity to AWS will be interrupted). The connection must be hosted on the same AWS Direct Connect endpoint as the LAG, and its bandwidth must match the bandwidth for the LAG. You can reassociate a connection that's currently associated with a different LAG; however, if removing the connection will cause the original LAG to fall below its setting for minimum number of operational connections, the request fails.
Virtual interfaces that are directly associated with the connection are not automatically migrated. You can delete them or associate them with the target LAG using AssociateVirtualInterface. If the connection was originally associated with a different LAG, the virtual interfaces remain associated with the original LAG.
For interconnects, hosted connections are not automatically migrated. You can delete them, or the owner of the physical connection can associate them with the target LAG using AssociateHostedConnection. After all hosted connections have been migrated, the interconnect can be migrated into the LAG. If the interconnect is already associated with a LAG, the hosted connections remain associated with the original LAG.
See also: AWS API Documentation
Request Syntax
client.associate_connection_with_lag(
connectionId='string',
lagId='string'
)
string
[REQUIRED]
The ID of the connection.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the LAG with which to associate the connection.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'awsDevice': 'string', 'lagId': 'string'}
Associates a hosted connection and its virtual interfaces with a link aggregation group (LAG) or interconnect. If the target interconnect or LAG has an existing hosted connection with a conflicting VLAN number or IP address, the operation fails. This action temporarily interrupts the hosted connection's connectivity to AWS as it is being migrated.
See also: AWS API Documentation
Request Syntax
client.associate_hosted_connection(
connectionId='string',
parentConnectionId='string'
)
string
[REQUIRED]
The ID of the hosted connection.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the interconnect or the LAG.
Example: dxcon-abc123 or dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'lagId': 'string'}
Response {'awsDevice': 'string', 'lagId': 'string'}
Creates a new connection between the customer network and a specific AWS Direct Connect location.
A connection links your internal network to an AWS Direct Connect location over a standard 1 gigabit or 10 gigabit Ethernet fiber-optic cable. One end of the cable is connected to your router, the other to an AWS Direct Connect router. An AWS Direct Connect location provides access to Amazon Web Services in the region it is associated with. You can establish connections with AWS Direct Connect locations in multiple regions, but a connection in one region does not provide connectivity to other regions.
You can automatically add the new connection to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new connection is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no connection will be created.
See also: AWS API Documentation
Request Syntax
client.create_connection(
location='string',
bandwidth='string',
connectionName='string',
lagId='string'
)
string
[REQUIRED]
Where the connection is located.
Example: EqSV5
Default: None
string
[REQUIRED]
Bandwidth of the connection.
Example: 1Gbps
Default: None
string
[REQUIRED]
The name of the connection.
Example: "My Connection to AWS"
Default: None
string
The ID of the LAG.
Example: dxlag-fg5678gh
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'lagId': 'string'}
Response {'awsDevice': 'string', 'lagId': 'string'}
Creates a new interconnect between a AWS Direct Connect partner's network and a specific AWS Direct Connect location.
An interconnect is a connection which is capable of hosting other connections. The AWS Direct Connect partner can use an interconnect to provide sub-1Gbps AWS Direct Connect service to tier 2 customers who do not have their own connections. Like a standard connection, an interconnect links the AWS Direct Connect partner's network to an AWS Direct Connect location over a standard 1 Gbps or 10 Gbps Ethernet fiber-optic cable. One end is connected to the partner's router, the other to an AWS Direct Connect router.
You can automatically add the new interconnect to a link aggregation group (LAG) by specifying a LAG ID in the request. This ensures that the new interconnect is allocated on the same AWS Direct Connect endpoint that hosts the specified LAG. If there are no available ports on the endpoint, the request fails and no interconnect will be created.
For each end customer, the AWS Direct Connect partner provisions a connection on their interconnect by calling AllocateConnectionOnInterconnect. The end customer can then connect to AWS resources by creating a virtual interface on their connection, using the VLAN assigned to them by the AWS Direct Connect partner.
See also: AWS API Documentation
Request Syntax
client.create_interconnect(
interconnectName='string',
bandwidth='string',
location='string',
lagId='string'
)
string
[REQUIRED]
The name of the interconnect.
Example: "1G Interconnect to AWS"
Default: None
string
[REQUIRED]
The port bandwidth
Example: 1Gbps
Default: None
Available values: 1Gbps,10Gbps
string
[REQUIRED]
Where the interconnect is located
Example: EqSV5
Default: None
string
The ID of the LAG.
Example: dxlag-fg5678gh
dict
Response Syntax
{
'interconnectId': 'string',
'interconnectName': 'string',
'interconnectState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
An interconnect is a connection that can host other connections.
Like a standard AWS Direct Connect connection, an interconnect represents the physical connection between an AWS Direct Connect partner's network and a specific Direct Connect location. An AWS Direct Connect partner who owns an interconnect can provision hosted connections on the interconnect for their end customers, thereby providing the end customers with connectivity to AWS services.
The resources of the interconnect, including bandwidth and VLAN numbers, are shared by all of the hosted connections on the interconnect, and the owner of the interconnect determines how these resources are assigned.
interconnectId (string) --
The ID of the interconnect.
Example: dxcon-abc123
interconnectName (string) --
The name of the interconnect.
Example: "1G Interconnect to AWS"
interconnectState (string) --
State of the interconnect.
Requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The interconnect has been approved, and is being initialized.
Available: The network link is up, and the interconnect is ready for use.
Down: The network link is down.
Deleting: The interconnect is in the process of being deleted.
Deleted: The interconnect has been deleted.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps
Default: None
loaIssueTime (datetime) --
The time of the most recent call to DescribeInterconnectLoa for this Interconnect.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'awsDevice': 'string', 'lagId': 'string'}
Deletes the connection.
Deleting a connection only stops the AWS Direct Connect port hour and data transfer charges. You need to cancel separately with the providers any services or charges for cross-connects or network circuits that connect you to the AWS Direct Connect location.
See also: AWS API Documentation
Request Syntax
client.delete_connection(
connectionId='string'
)
string
[REQUIRED]
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'connections': {'awsDevice': 'string', 'lagId': 'string'}}
Displays all connections in this region.
If a connection ID is provided, the call returns only that particular connection.
See also: AWS API Documentation
Request Syntax
client.describe_connections(
connectionId='string'
)
string
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
dict
Response Syntax
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of connections.
connections (list) --
A list of connections.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'connections': {'awsDevice': 'string', 'lagId': 'string'}}
Deprecated in favor of DescribeHostedConnections.
Returns a list of connections that have been provisioned on the given interconnect.
See also: AWS API Documentation
Request Syntax
client.describe_connections_on_interconnect(
interconnectId='string'
)
string
[REQUIRED]
ID of the interconnect on which a list of connection is provisioned.
Example: dxcon-abc123
Default: None
dict
Response Syntax
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of connections.
connections (list) --
A list of connections.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'connections': {'awsDevice': 'string', 'lagId': 'string'}}
Returns a list of hosted connections that have been provisioned on the given interconnect or link aggregation group (LAG).
See also: AWS API Documentation
Request Syntax
client.describe_hosted_connections(
connectionId='string'
)
string
[REQUIRED]
The ID of the interconnect or LAG on which the hosted connections are provisioned.
Example: dxcon-abc123 or dxlag-abc123
Default: None
dict
Response Syntax
{
'connections': [
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of connections.
connections (list) --
A list of connections.
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'interconnects': {'awsDevice': 'string', 'lagId': 'string'}}
Returns a list of interconnects owned by the AWS account.
If an interconnect ID is provided, it will only return this particular interconnect.
See also: AWS API Documentation
Request Syntax
client.describe_interconnects(
interconnectId='string'
)
string
The ID of the interconnect.
Example: dxcon-abc123
dict
Response Syntax
{
'interconnects': [
{
'interconnectId': 'string',
'interconnectName': 'string',
'interconnectState': 'requested'|'pending'|'available'|'down'|'deleting'|'deleted',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
},
]
}
Response Structure
(dict) --
A structure containing a list of interconnects.
interconnects (list) --
A list of interconnects.
(dict) --
An interconnect is a connection that can host other connections.
Like a standard AWS Direct Connect connection, an interconnect represents the physical connection between an AWS Direct Connect partner's network and a specific Direct Connect location. An AWS Direct Connect partner who owns an interconnect can provision hosted connections on the interconnect for their end customers, thereby providing the end customers with connectivity to AWS services.
The resources of the interconnect, including bandwidth and VLAN numbers, are shared by all of the hosted connections on the interconnect, and the owner of the interconnect determines how these resources are assigned.
interconnectId (string) --
The ID of the interconnect.
Example: dxcon-abc123
interconnectName (string) --
The name of the interconnect.
Example: "1G Interconnect to AWS"
interconnectState (string) --
State of the interconnect.
Requested: The initial state of an interconnect. The interconnect stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The interconnect has been approved, and is being initialized.
Available: The network link is up, and the interconnect is ready for use.
Down: The network link is down.
Deleting: The interconnect is in the process of being deleted.
Deleted: The interconnect has been deleted.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps
Default: None
loaIssueTime (datetime) --
The time of the most recent call to DescribeInterconnectLoa for this Interconnect.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.
{'awsDevice': 'string', 'lagId': 'string'}
Disassociates a connection from a link aggregation group (LAG). The connection is interrupted and re-established as a standalone connection (the connection is not deleted; to delete the connection, use the DeleteConnection request). If the LAG has associated virtual interfaces or hosted connections, they remain associated with the LAG. A disassociated connection owned by an AWS Direct Connect partner is automatically converted to an interconnect.
If disassociating the connection will cause the LAG to fall below its setting for minimum number of operational connections, the request fails, except when it's the last member of the LAG. If all connections are disassociated, the LAG continues to exist as an empty LAG with no physical connections.
See also: AWS API Documentation
Request Syntax
client.disassociate_connection_from_lag(
connectionId='string',
lagId='string'
)
string
[REQUIRED]
The ID of the connection to disassociate from the LAG.
Example: dxcon-abc123
Default: None
string
[REQUIRED]
The ID of the LAG.
Example: dxlag-abc123
Default: None
dict
Response Syntax
{
'ownerAccount': 'string',
'connectionId': 'string',
'connectionName': 'string',
'connectionState': 'ordering'|'requested'|'pending'|'available'|'down'|'deleting'|'deleted'|'rejected',
'region': 'string',
'location': 'string',
'bandwidth': 'string',
'vlan': 123,
'partnerName': 'string',
'loaIssueTime': datetime(2015, 1, 1),
'lagId': 'string',
'awsDevice': 'string'
}
Response Structure
(dict) --
A connection represents the physical network connection between the AWS Direct Connect location and the customer.
ownerAccount (string) --
The AWS account that will own the new connection.
connectionId (string) --
The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection).
Example: dxcon-fg5678gh
Default: None
connectionName (string) --
The name of the connection.
Example: "My Connection to AWS"
Default: None
connectionState (string) --
State of the connection.
Ordering: The initial state of a hosted connection provisioned on an interconnect. The connection stays in the ordering state until the owner of the hosted connection confirms or declines the connection order.
Requested: The initial state of a standard connection. The connection stays in the requested state until the Letter of Authorization (LOA) is sent to the customer.
Pending: The connection has been approved, and is being initialized.
Available: The network link is up, and the connection is ready for use.
Down: The network link is down.
Deleting: The connection is in the process of being deleted.
Deleted: The connection has been deleted.
Rejected: A hosted connection in the 'Ordering' state will enter the 'Rejected' state if it is deleted by the end customer.
region (string) --
The AWS region where the connection is located.
Example: us-east-1
Default: None
location (string) --
Where the connection is located.
Example: EqSV5
Default: None
bandwidth (string) --
Bandwidth of the connection.
Example: 1Gbps (for regular connections), or 500Mbps (for hosted connections)
Default: None
vlan (integer) --
The VLAN ID.
Example: 101
partnerName (string) --
The name of the AWS Direct Connect service provider associated with the connection.
loaIssueTime (datetime) --
The time of the most recent call to DescribeLoa for this connection.
lagId (string) --
The ID of the LAG.
Example: dxlag-fg5678gh
awsDevice (string) --
The Direct Connection endpoint which the physical connection terminates on.