2024/04/25 - Firewall Management Service - 8 updated api methods
Changes AWS Firewall Manager adds support for network ACL policies to manage Amazon Virtual Private Cloud (VPC) network access control lists (ACLs) for accounts in your organization.
{'AdminScope': {'PolicyTypeScope': {'PolicyTypes': {'NETWORK_ACL_COMMON'}}}}
Returns information about the specified account's administrative scope. The administrative scope defines the resources that an Firewall Manager administrator can manage.
See also: AWS API Documentation
Request Syntax
client.get_admin_scope(
AdminAccount='string'
)
string
[REQUIRED]
The administrator account that you want to get the details for.
dict
Response Syntax
{
'AdminScope': {
'AccountScope': {
'Accounts': [
'string',
],
'AllAccountsEnabled': True|False,
'ExcludeSpecifiedAccounts': True|False
},
'OrganizationalUnitScope': {
'OrganizationalUnits': [
'string',
],
'AllOrganizationalUnitsEnabled': True|False,
'ExcludeSpecifiedOrganizationalUnits': True|False
},
'RegionScope': {
'Regions': [
'string',
],
'AllRegionsEnabled': True|False
},
'PolicyTypeScope': {
'PolicyTypes': [
'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
],
'AllPolicyTypesEnabled': True|False
}
},
'Status': 'ONBOARDING'|'ONBOARDING_COMPLETE'|'OFFBOARDING'|'OFFBOARDING_COMPLETE'
}
Response Structure
(dict) --
AdminScope (dict) --
Contains details about the administrative scope of the requested account.
AccountScope (dict) --
Defines the accounts that the specified Firewall Manager administrator can apply policies to.
Accounts (list) --
The list of accounts within the organization that the specified Firewall Manager administrator either can or cannot apply policies to, based on the value of ExcludeSpecifiedAccounts. If ExcludeSpecifiedAccounts is set to true, then the Firewall Manager administrator can apply policies to all members of the organization except for the accounts in this list. If ExcludeSpecifiedAccounts is set to false, then the Firewall Manager administrator can only apply policies to the accounts in this list.
(string) --
AllAccountsEnabled (boolean) --
A boolean value that indicates if the administrator can apply policies to all accounts within an organization. If true, the administrator can apply policies to all accounts within the organization. You can either enable management of all accounts through this operation, or you can specify a list of accounts to manage in AccountScope$Accounts. You cannot specify both.
ExcludeSpecifiedAccounts (boolean) --
A boolean value that excludes the accounts in AccountScope$Accounts from the administrator's scope. If true, the Firewall Manager administrator can apply policies to all members of the organization except for the accounts listed in AccountScope$Accounts. You can either specify a list of accounts to exclude by AccountScope$Accounts, or you can enable management of all accounts by AccountScope$AllAccountsEnabled. You cannot specify both.
OrganizationalUnitScope (dict) --
Defines the Organizations organizational units that the specified Firewall Manager administrator can apply policies to. For more information about OUs in Organizations, see Managing organizational units (OUs) in the Organizations User Guide.
OrganizationalUnits (list) --
The list of OUs within the organization that the specified Firewall Manager administrator either can or cannot apply policies to, based on the value of OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits. If OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits is set to true, then the Firewall Manager administrator can apply policies to all OUs in the organization except for the OUs in this list. If OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits is set to false, then the Firewall Manager administrator can only apply policies to the OUs in this list.
(string) --
AllOrganizationalUnitsEnabled (boolean) --
A boolean value that indicates if the administrator can apply policies to all OUs within an organization. If true, the administrator can manage all OUs within the organization. You can either enable management of all OUs through this operation, or you can specify OUs to manage in OrganizationalUnitScope$OrganizationalUnits. You cannot specify both.
ExcludeSpecifiedOrganizationalUnits (boolean) --
A boolean value that excludes the OUs in OrganizationalUnitScope$OrganizationalUnits from the administrator's scope. If true, the Firewall Manager administrator can apply policies to all OUs in the organization except for the OUs listed in OrganizationalUnitScope$OrganizationalUnits. You can either specify a list of OUs to exclude by OrganizationalUnitScope$OrganizationalUnits, or you can enable management of all OUs by OrganizationalUnitScope$AllOrganizationalUnitsEnabled. You cannot specify both.
RegionScope (dict) --
Defines the Amazon Web Services Regions that the specified Firewall Manager administrator can perform actions in.
Regions (list) --
The Amazon Web Services Regions that the specified Firewall Manager administrator can perform actions in.
(string) --
AllRegionsEnabled (boolean) --
Allows the specified Firewall Manager administrator to manage all Amazon Web Services Regions.
PolicyTypeScope (dict) --
Defines the Firewall Manager policy types that the specified Firewall Manager administrator can create and manage.
PolicyTypes (list) --
The list of policy types that the specified Firewall Manager administrator can manage.
(string) --
AllPolicyTypesEnabled (boolean) --
Allows the specified Firewall Manager administrator to manage all Firewall Manager policy types, except for third-party policy types. Third-party policy types can only be managed by the Firewall Manager default administrator.
Status (string) --
The current status of the request to onboard a member account as an Firewall Manager administrator.
ONBOARDING - The account is onboarding to Firewall Manager as an administrator.
ONBOARDING_COMPLETE - Firewall Manager The account is onboarded to Firewall Manager as an administrator, and can perform actions on the resources defined in their AdminScope.
OFFBOARDING - The account is being removed as an Firewall Manager administrator.
OFFBOARDING_COMPLETE - The account has been removed as an Firewall Manager administrator.
{'PolicyComplianceDetail': {'Violators': {'ViolationReason': {'INVALID_NETWORK_ACL_ENTRY'}}}}
Returns detailed compliance information about the specified member account. Details include resources that are in and out of compliance with the specified policy.
The reasons for resources being considered compliant depend on the Firewall Manager policy type.
See also: AWS API Documentation
Request Syntax
client.get_compliance_detail(
PolicyId='string',
MemberAccount='string'
)
string
[REQUIRED]
The ID of the policy that you want to get the details for. PolicyId is returned by PutPolicy and by ListPolicies.
string
[REQUIRED]
The Amazon Web Services account that owns the resources that you want to get the details for.
dict
Response Syntax
{
'PolicyComplianceDetail': {
'PolicyOwner': 'string',
'PolicyId': 'string',
'MemberAccount': 'string',
'Violators': [
{
'ResourceId': 'string',
'ViolationReason': 'WEB_ACL_MISSING_RULE_GROUP'|'RESOURCE_MISSING_WEB_ACL'|'RESOURCE_INCORRECT_WEB_ACL'|'RESOURCE_MISSING_SHIELD_PROTECTION'|'RESOURCE_MISSING_WEB_ACL_OR_SHIELD_PROTECTION'|'RESOURCE_MISSING_SECURITY_GROUP'|'RESOURCE_VIOLATES_AUDIT_SECURITY_GROUP'|'SECURITY_GROUP_UNUSED'|'SECURITY_GROUP_REDUNDANT'|'FMS_CREATED_SECURITY_GROUP_EDITED'|'MISSING_FIREWALL'|'MISSING_FIREWALL_SUBNET_IN_AZ'|'MISSING_EXPECTED_ROUTE_TABLE'|'NETWORK_FIREWALL_POLICY_MODIFIED'|'FIREWALL_SUBNET_IS_OUT_OF_SCOPE'|'INTERNET_GATEWAY_MISSING_EXPECTED_ROUTE'|'FIREWALL_SUBNET_MISSING_EXPECTED_ROUTE'|'UNEXPECTED_FIREWALL_ROUTES'|'UNEXPECTED_TARGET_GATEWAY_ROUTES'|'TRAFFIC_INSPECTION_CROSSES_AZ_BOUNDARY'|'INVALID_ROUTE_CONFIGURATION'|'MISSING_TARGET_GATEWAY'|'INTERNET_TRAFFIC_NOT_INSPECTED'|'BLACK_HOLE_ROUTE_DETECTED'|'BLACK_HOLE_ROUTE_DETECTED_IN_FIREWALL_SUBNET'|'RESOURCE_MISSING_DNS_FIREWALL'|'ROUTE_HAS_OUT_OF_SCOPE_ENDPOINT'|'FIREWALL_SUBNET_MISSING_VPCE_ENDPOINT'|'INVALID_NETWORK_ACL_ENTRY',
'ResourceType': 'string',
'Metadata': {
'string': 'string'
}
},
],
'EvaluationLimitExceeded': True|False,
'ExpiredAt': datetime(2015, 1, 1),
'IssueInfoMap': {
'string': 'string'
}
}
}
Response Structure
(dict) --
PolicyComplianceDetail (dict) --
Information about the resources and the policy that you specified in the GetComplianceDetail request.
PolicyOwner (string) --
The Amazon Web Services account that created the Firewall Manager policy.
PolicyId (string) --
The ID of the Firewall Manager policy.
MemberAccount (string) --
The Amazon Web Services account ID.
Violators (list) --
An array of resources that aren't protected by the WAF or Shield Advanced policy or that aren't in compliance with the security group policy.
(dict) --
Details of the resource that is not protected by the policy.
ResourceId (string) --
The resource ID.
ViolationReason (string) --
The reason that the resource is not protected by the policy.
ResourceType (string) --
The resource type. This is in the format shown in the Amazon Web Services Resource Types Reference. For example: AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::CloudFront::Distribution, or AWS::NetworkFirewall::FirewallPolicy.
Metadata (dict) --
Metadata about the resource that doesn't comply with the policy scope.
(string) --
(string) --
EvaluationLimitExceeded (boolean) --
Indicates if over 100 resources are noncompliant with the Firewall Manager policy.
ExpiredAt (datetime) --
A timestamp that indicates when the returned information should be considered out of date.
IssueInfoMap (dict) --
Details about problems with dependent services, such as WAF or Config, and the error message received that indicates the problem with the service.
(string) --
(string) --
{'Policy': {'SecurityServicePolicyData': {'PolicyOption': {'NetworkAclCommonPolicy': {'NetworkAclEntrySet': {'FirstEntries': [{'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'}],
'ForceRemediateForFirstEntries': 'boolean',
'ForceRemediateForLastEntries': 'boolean',
'LastEntries': [{'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'}]}}},
'Type': {'NETWORK_ACL_COMMON'}}}}
Returns information about the specified Firewall Manager policy.
See also: AWS API Documentation
Request Syntax
client.get_policy(
PolicyId='string'
)
string
[REQUIRED]
The ID of the Firewall Manager policy that you want the details for.
dict
Response Syntax
{
'Policy': {
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyUpdateToken': 'string',
'SecurityServicePolicyData': {
'Type': 'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
'ManagedServiceData': 'string',
'PolicyOption': {
'NetworkFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'ThirdPartyFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'NetworkAclCommonPolicy': {
'NetworkAclEntrySet': {
'FirstEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForFirstEntries': True|False,
'LastEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForLastEntries': True|False
}
}
}
},
'ResourceType': 'string',
'ResourceTypeList': [
'string',
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ExcludeResourceTags': True|False,
'RemediationEnabled': True|False,
'DeleteUnusedFMManagedResources': True|False,
'IncludeMap': {
'string': [
'string',
]
},
'ExcludeMap': {
'string': [
'string',
]
},
'ResourceSetIds': [
'string',
],
'PolicyDescription': 'string',
'PolicyStatus': 'ACTIVE'|'OUT_OF_ADMIN_SCOPE'
},
'PolicyArn': 'string'
}
Response Structure
(dict) --
Policy (dict) --
Information about the specified Firewall Manager policy.
PolicyId (string) --
The ID of the Firewall Manager policy.
PolicyName (string) --
The name of the Firewall Manager policy.
PolicyUpdateToken (string) --
A unique identifier for each update to the policy. When issuing a PutPolicy request, the PolicyUpdateToken in the request must match the PolicyUpdateToken of the current policy version. To get the PolicyUpdateToken of the current policy version, use a GetPolicy request.
SecurityServicePolicyData (dict) --
Details about the security service that is being used to protect the resources.
Type (string) --
The service that the policy is using to protect the resources. This specifies the type of policy that is created, either an WAF policy, a Shield Advanced policy, or a security group policy. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting Amazon Web Services Support.
ManagedServiceData (string) --
Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: IMPORT_NETWORK_FIREWALL "{\"type\":\"IMPORT_NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:000000000000:stateless-rulegroup\/rg1\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:drop\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:pass\"],\"networkFirewallStatelessCustomActions\":[],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:aws-managed:stateful-rulegroup\/ThreatSignaturesEmergingEventsStrictOrder\",\"priority\":8}],\"networkFirewallStatefulEngineOptions\":{\"ruleOrder\":\"STRICT_ORDER\"},\"networkFirewallStatefulDefaultActions\":[\"aws:drop_strict\"]}}" "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: NETWORK_FIREWALL - Centralized deployment model "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}" To use the centralized deployment model, you must set PolicyOption to CENTRALIZED.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig. To configure the Availability Zones in firewallCreationConfig, specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: SECURITY_GROUPS_COMMON "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_COMMON - Security group tag distribution ""{\"type\":\"SECURITY_GROUPS_COMMON\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"revertManualSecurityGroupChanges\":true,\"exclusiveResourceSecurityGroupManagement\":false,\"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":false,\"enableTagDistribution\":true}"" Firewall Manager automatically distributes tags from the primary group to the security groups created by this policy. To use security group tag distribution, you must also set revertManualSecurityGroupChanges to true, otherwise Firewall Manager won't be able to create the policy. When you enable revertManualSecurityGroupChanges, Firewall Manager identifies and reports when the security groups created by this policy become non-compliant. Firewall Manager won't distribute system tags added by Amazon Web Services services into the replica security groups. System tags begin with the aws: prefix.
Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_CONTENT_AUDIT "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}" The security group action for content audit can be ALLOW or DENY. For ALLOW, all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY, all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.
Example: SECURITY_GROUPS_USAGE_AUDIT "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"
Example: SHIELD_ADVANCED with web ACL management "{\"type\":\"SHIELD_ADVANCED\",\"optimizeUnassociatedWebACL\":true}" If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager doesn't disassociate the resource from the web ACL. If you want Firewall Manager to clean up the web ACL, you must first manually disassociate the resources from the web ACL, and then enable the manage unused web ACLs option in your policy. If you set optimizeUnassociatedWebACL to false, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Specification for SHIELD_ADVANCED for Amazon CloudFront distributions "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false, \"optimizeUnassociatedWebACL\":true|false}" For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}" The default value for automaticResponseStatus is IGNORED. The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED. The default value for overrideCustomerWebaclClassic is false. For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.
Example: THIRD_PARTY_FIREWALL Replace THIRD_PARTY_FIREWALL_NAME with the name of the third-party firewall. "{ "type":"THIRD_PARTY_FIREWALL", "thirdPartyFirewall":"THIRD_PARTY_FIREWALL_NAME", "thirdPartyFirewallConfig":{ "thirdPartyFirewallPolicyList":["global-1"] }, "firewallDeploymentModel":{ "distributedFirewallDeploymentModel":{ "distributedFirewallOrchestrationConfig":{ "firewallCreationConfig":{ "endpointLocation":{ "availabilityZoneConfigList":[ { "availabilityZoneName":"${AvailabilityZone}" } ] } }, "allowedIPV4CidrList":[ ] } } } }"
Example: WAFV2 - Account takeover prevention, Bot Control managed rule groups, optimize unassociated web ACL, and rule action override "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesATPRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesATPRuleSet\":{\"loginPath\":\"/loginpath\",\"requestInspection\":{\"payloadType\":\"FORM_ENCODED|JSON\",\"usernameField\":{\"identifier\":\"/form/username\"},\"passwordField\":{\"identifier\":\"/form/password\"}}}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true},{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesBotControlRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesBotControlRuleSet\":{\"inspectionLevel\":\"TARGETED|COMMON\"}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true,\"ruleActionOverrides\":[{\"name\":\"Rule1\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}},{\"name\":\"Rule2\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"optimizeUnassociatedWebACL\":true}"
Bot Control - For information about AWSManagedRulesBotControlRuleSet managed rule groups, see AWSManagedRulesBotControlRuleSet in the WAF API Reference.
Fraud Control account takeover prevention (ATP) - For information about the properties available for AWSManagedRulesATPRuleSet managed rule groups, see AWSManagedRulesATPRuleSet in the WAF API Reference.
Optimize unassociated web ACL - If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager disassociates the resource from the web ACL, but won't clean up the unused web ACL. Firewall Manager only cleans up unused web ACLs when you first enable management of unused web ACLs in a policy. If you set optimizeUnassociatedWebACL to false Firewall Manager doesn't manage unused web ACLs, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Rule action overrides - Firewall Manager supports rule action overrides only for managed rule groups. To configure a RuleActionOverrides add the Name of the rule to override, and ActionToUse, which is the new action to use for the rule. For information about using rule action override, see RuleActionOverride in the WAF API Reference.
Example: WAFV2 - CAPTCHA and Challenge configs "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"captchaConfig\":{\"immunityTimeProperty\":{\"immunityTime\":500}},\"challengeConfig\":{\"immunityTimeProperty\":{\"immunityTime\":800}},\"tokenDomains\":[\"google.com\",\"amazon.com\"],\"associationConfig\":{\"requestBody\":{\"CLOUDFRONT\":{\"defaultSizeInspectionLimit\":\"KB_16\"}}}}"
CAPTCHA and Challenge configs - If you update the policy's values for associationConfig, captchaConfig, challengeConfig, or tokenDomains, Firewall Manager will overwrite your local web ACLs to contain the new value(s). However, if you don't update the policy's associationConfig, captchaConfig, challengeConfig, or tokenDomains values, the values in your local web ACLs will remain unchanged. For information about association configs, see AssociationConfig. For information about CAPTCHA and Challenge configs, see CaptchaConfig and ChallengeConfig in the WAF API Reference.
defaultSizeInspectionLimit - Specifies the maximum size of the web request body component that an associated Amazon CloudFront distribution should send to WAF for inspection. For more information, see DefaultSizeInspectionLimit in the WAF API Reference.
Example: WAFV2 - Firewall Manager support for WAF managed rule group versioning "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}" To use a specific version of a WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true, and set version to the version you'd like to use. If you don't set versionEnabled to true, or if you omit versionEnabled, then Firewall Manager uses the default version of the WAF managed rule group.
Example: WAFV2 - Logging configurations "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null, \"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\": {\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\", \"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"} ,\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[], \"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[], \"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\" :null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\" :false,\"loggingConfiguration\":{\"logDestinationConfigs\": [\"arn:aws:s3:::aws-waf-logs-example-bucket\"] ,\"redactedFields\":[],\"loggingFilterConfigs\":{\"defaultBehavior\":\"KEEP\", \"filters\":[{\"behavior\":\"KEEP\",\"requirement\":\"MEETS_ALL\", \"conditions\":[{\"actionCondition\":\"CAPTCHA\"},{\"actionCondition\": \"CHALLENGE\"}, {\"actionCondition\":\"EXCLUDED_AS_COUNT\"}]}]}},\"sampledRequestsEnabledForDefaultActions\":true}" Firewall Manager supports Amazon Kinesis Data Firehose and Amazon S3 as the logDestinationConfigs in your loggingConfiguration. For information about WAF logging configurations, see LoggingConfiguration in the WAF API Reference In the loggingConfiguration, you can specify one logDestinationConfigs. Optionally provide as many as 20 redactedFields. The RedactedFieldType must be one of URI, QUERY_STRING, HEADER, or METHOD.
Example: WAF Classic "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"
PolicyOption (dict) --
Contains the settings to configure a network ACL policy, a Network Firewall firewall policy deployment model, or a third-party firewall policy.
NetworkFirewallPolicy (dict) --
Defines the deployment model to use for the firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the firewall policy. To use a distributed model, set PolicyOption to NULL.
ThirdPartyFirewallPolicy (dict) --
Defines the policy options for a third-party firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the third-party firewall policy.
NetworkAclCommonPolicy (dict) --
Defines a Firewall Manager network ACL policy.
NetworkAclEntrySet (dict) --
The definition of the first and last rules for the network ACL policy.
FirstEntries (list) --
The rules that you want to run first in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForFirstEntries (boolean) --
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
LastEntries (list) --
The rules that you want to run last in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForLastEntries (boolean) --
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
ResourceType (string) --
The type of resource protected by or in scope of the policy. This is in the format shown in the Amazon Web Services Resource Types Reference. To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList.
The following are valid resource types for each Firewall Manager policy type:
Amazon Web Services WAF Classic - AWS::ApiGateway::Stage, AWS::CloudFront::Distribution, and AWS::ElasticLoadBalancingV2::LoadBalancer.
WAF - AWS::ApiGateway::Stage, AWS::ElasticLoadBalancingV2::LoadBalancer, and AWS::CloudFront::Distribution.
Shield Advanced - AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::ElasticLoadBalancing::LoadBalancer, AWS::EC2::EIP, and AWS::CloudFront::Distribution.
Network ACL - AWS::EC2::Subnet.
Security group usage audit - AWS::EC2::SecurityGroup.
Security group content audit - AWS::EC2::SecurityGroup, AWS::EC2::NetworkInterface, and AWS::EC2::Instance.
DNS Firewall, Network Firewall, and third-party firewall - AWS::EC2::VPC.
ResourceTypeList (list) --
An array of ResourceType objects. Use this only to specify multiple resource types. To specify a single resource type, use ResourceType.
(string) --
ResourceTags (list) --
An array of ResourceTag objects.
(dict) --
The resource tags that Firewall Manager uses to determine if a particular resource should be included or excluded from the Firewall Manager policy. Tags enable you to categorize your Amazon Web Services resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value. Firewall Manager combines the tags with "AND" so that, if you add more than one tag to a policy scope, a resource must have all the specified tags to be included or excluded. For more information, see Working with Tag Editor.
Key (string) --
The resource tag key.
Value (string) --
The resource tag value.
ExcludeResourceTags (boolean) --
If set to True, resources with the tags that are specified in the ResourceTag array are not in scope of the policy. If set to False, and the ResourceTag array is not null, only resources with the specified tags are in scope of the policy.
RemediationEnabled (boolean) --
Indicates if the policy should be automatically applied to new resources.
DeleteUnusedFMManagedResources (boolean) --
Indicates whether Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope. For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.
By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.
This option is not available for Shield Advanced or WAF Classic policies.
IncludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to include in the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ExcludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to exclude from the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ResourceSetIds (list) --
The unique identifiers of the resource sets used by the policy.
(string) --
PolicyDescription (string) --
The definition of the Network Firewall firewall policy.
PolicyStatus (string) --
Indicates whether the policy is in or out of an admin's policy or Region scope.
ACTIVE - The administrator can manage and delete the policy.
OUT_OF_ADMIN_SCOPE - The administrator can view the policy, but they can't edit or delete the policy. Existing policy protections stay in place. Any new resources that come into scope of the policy won't be protected.
PolicyArn (string) --
The Amazon Resource Name (ARN) of the specified policy.
{'ServiceType': {'NETWORK_ACL_COMMON'}}
If you created a Shield Advanced policy, returns policy-level attack summary information in the event of a potential DDoS attack. Other policy types are currently unsupported.
See also: AWS API Documentation
Request Syntax
client.get_protection_status(
PolicyId='string',
MemberAccountId='string',
StartTime=datetime(2015, 1, 1),
EndTime=datetime(2015, 1, 1),
NextToken='string',
MaxResults=123
)
string
[REQUIRED]
The ID of the policy for which you want to get the attack information.
string
The Amazon Web Services account that is in scope of the policy that you want to get the details for.
datetime
The start of the time period to query for the attacks. This is a timestamp type. The request syntax listing indicates a number type because the default used by Firewall Manager is Unix time in seconds. However, any valid timestamp format is allowed.
datetime
The end of the time period to query for the attacks. This is a timestamp type. The request syntax listing indicates a number type because the default used by Firewall Manager is Unix time in seconds. However, any valid timestamp format is allowed.
string
If you specify a value for MaxResults and you have more objects than the number that you specify for MaxResults, Firewall Manager returns a NextToken value in the response, which you can use to retrieve another group of objects. For the second and subsequent GetProtectionStatus requests, specify the value of NextToken from the previous response to get information about another batch of objects.
integer
Specifies the number of objects that you want Firewall Manager to return for this request. If you have more objects than the number that you specify for MaxResults, the response includes a NextToken value that you can use to get another batch of objects.
dict
Response Syntax
{
'AdminAccountId': 'string',
'ServiceType': 'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
'Data': 'string',
'NextToken': 'string'
}
Response Structure
(dict) --
AdminAccountId (string) --
The ID of the Firewall Manager administrator account for this policy.
ServiceType (string) --
The service type that is protected by the policy. Currently, this is always SHIELD_ADVANCED.
Data (string) --
Details about the attack, including the following:
Attack type
Account ID
ARN of the resource attacked
Start time of the attack
End time of the attack (ongoing attacks will not have an end time)
The details are in JSON format.
NextToken (string) --
If you have more objects than the number that you specified for MaxResults in the request, the response includes a NextToken value. To list more objects, submit another GetProtectionStatus request, and specify the NextToken value from the response in the NextToken value in the next request.
Amazon Web Services SDKs provide auto-pagination that identify NextToken in a response and make subsequent request calls automatically on your behalf. However, this feature is not supported by GetProtectionStatus. You must submit subsequent requests with NextToken using your own processes.
{'ViolationDetail': {'ResourceViolations': {'InvalidNetworkAclEntriesViolation': {'CurrentAssociatedNetworkAcl': 'string',
'EntryViolations': [{'ActualEvaluationOrder': 'string',
'EntriesWithConflicts': [{'EntryDetail': {'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'},
'EntryRuleNumber': 'integer',
'EntryType': 'FMS_MANAGED_FIRST_ENTRY '
'| '
'FMS_MANAGED_LAST_ENTRY '
'| '
'CUSTOM_ENTRY'}],
'EntryAtExpectedEvaluationOrder': {'EntryDetail': {'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'},
'EntryRuleNumber': 'integer',
'EntryType': 'FMS_MANAGED_FIRST_ENTRY '
'| '
'FMS_MANAGED_LAST_ENTRY '
'| '
'CUSTOM_ENTRY'},
'EntryViolationReasons': ['MISSING_EXPECTED_ENTRY '
'| '
'INCORRECT_ENTRY_ORDER '
'| '
'ENTRY_CONFLICT'],
'ExpectedEntry': {'EntryDetail': {'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'},
'EntryRuleNumber': 'integer',
'EntryType': 'FMS_MANAGED_FIRST_ENTRY '
'| '
'FMS_MANAGED_LAST_ENTRY '
'| '
'CUSTOM_ENTRY'},
'ExpectedEvaluationOrder': 'string'}],
'Subnet': 'string',
'SubnetAvailabilityZone': 'string',
'Vpc': 'string'},
'PossibleRemediationActions': {'Actions': {'OrderedRemediationActions': {'RemediationAction': {'CreateNetworkAclAction': {'Description': 'string',
'FMSCanRemediate': 'boolean',
'Vpc': {'Description': 'string',
'ResourceId': 'string'}},
'CreateNetworkAclEntriesAction': {'Description': 'string',
'FMSCanRemediate': 'boolean',
'NetworkAclEntriesToBeCreated': [{'EntryDetail': {'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'},
'EntryRuleNumber': 'integer',
'EntryType': 'FMS_MANAGED_FIRST_ENTRY '
'| '
'FMS_MANAGED_LAST_ENTRY '
'| '
'CUSTOM_ENTRY'}],
'NetworkAclId': {'Description': 'string',
'ResourceId': 'string'}},
'DeleteNetworkAclEntriesAction': {'Description': 'string',
'FMSCanRemediate': 'boolean',
'NetworkAclEntriesToBeDeleted': [{'EntryDetail': {'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'},
'EntryRuleNumber': 'integer',
'EntryType': 'FMS_MANAGED_FIRST_ENTRY '
'| '
'FMS_MANAGED_LAST_ENTRY '
'| '
'CUSTOM_ENTRY'}],
'NetworkAclId': {'Description': 'string',
'ResourceId': 'string'}},
'ReplaceNetworkAclAssociationAction': {'AssociationId': {'Description': 'string',
'ResourceId': 'string'},
'Description': 'string',
'FMSCanRemediate': 'boolean',
'NetworkAclId': {'Description': 'string',
'ResourceId': 'string'}}}}}}}}}
Retrieves violations for a resource based on the specified Firewall Manager policy and Amazon Web Services account.
See also: AWS API Documentation
Request Syntax
client.get_violation_details(
PolicyId='string',
MemberAccount='string',
ResourceId='string',
ResourceType='string'
)
string
[REQUIRED]
The ID of the Firewall Manager policy that you want the details for. You can get violation details for the following policy types:
DNS Firewall
Imported Network Firewall
Network Firewall
Security group content audit
Network ACL
Third-party firewall
string
[REQUIRED]
The Amazon Web Services account ID that you want the details for.
string
[REQUIRED]
The ID of the resource that has violations.
string
[REQUIRED]
The resource type. This is in the format shown in the Amazon Web Services Resource Types Reference. Supported resource types are: AWS::EC2::Instance, AWS::EC2::NetworkInterface, AWS::EC2::SecurityGroup, AWS::NetworkFirewall::FirewallPolicy, and AWS::EC2::Subnet.
dict
Response Syntax
{
'ViolationDetail': {
'PolicyId': 'string',
'MemberAccount': 'string',
'ResourceId': 'string',
'ResourceType': 'string',
'ResourceViolations': [
{
'AwsVPCSecurityGroupViolation': {
'ViolationTarget': 'string',
'ViolationTargetDescription': 'string',
'PartialMatches': [
{
'Reference': 'string',
'TargetViolationReasons': [
'string',
]
},
],
'PossibleSecurityGroupRemediationActions': [
{
'RemediationActionType': 'REMOVE'|'MODIFY',
'Description': 'string',
'RemediationResult': {
'IPV4Range': 'string',
'IPV6Range': 'string',
'PrefixListId': 'string',
'Protocol': 'string',
'FromPort': 123,
'ToPort': 123
},
'IsDefaultAction': True|False
},
]
},
'AwsEc2NetworkInterfaceViolation': {
'ViolationTarget': 'string',
'ViolatingSecurityGroups': [
'string',
]
},
'AwsEc2InstanceViolation': {
'ViolationTarget': 'string',
'AwsEc2NetworkInterfaceViolations': [
{
'ViolationTarget': 'string',
'ViolatingSecurityGroups': [
'string',
]
},
]
},
'NetworkFirewallMissingFirewallViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'TargetViolationReason': 'string'
},
'NetworkFirewallMissingSubnetViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'TargetViolationReason': 'string'
},
'NetworkFirewallMissingExpectedRTViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'CurrentRouteTable': 'string',
'ExpectedRouteTable': 'string'
},
'NetworkFirewallPolicyModifiedViolation': {
'ViolationTarget': 'string',
'CurrentPolicyDescription': {
'StatelessRuleGroups': [
{
'RuleGroupName': 'string',
'ResourceId': 'string',
'Priority': 123
},
],
'StatelessDefaultActions': [
'string',
],
'StatelessFragmentDefaultActions': [
'string',
],
'StatelessCustomActions': [
'string',
],
'StatefulRuleGroups': [
{
'RuleGroupName': 'string',
'ResourceId': 'string',
'Priority': 123,
'Override': {
'Action': 'DROP_TO_ALERT'
}
},
],
'StatefulDefaultActions': [
'string',
],
'StatefulEngineOptions': {
'RuleOrder': 'STRICT_ORDER'|'DEFAULT_ACTION_ORDER'
}
},
'ExpectedPolicyDescription': {
'StatelessRuleGroups': [
{
'RuleGroupName': 'string',
'ResourceId': 'string',
'Priority': 123
},
],
'StatelessDefaultActions': [
'string',
],
'StatelessFragmentDefaultActions': [
'string',
],
'StatelessCustomActions': [
'string',
],
'StatefulRuleGroups': [
{
'RuleGroupName': 'string',
'ResourceId': 'string',
'Priority': 123,
'Override': {
'Action': 'DROP_TO_ALERT'
}
},
],
'StatefulDefaultActions': [
'string',
],
'StatefulEngineOptions': {
'RuleOrder': 'STRICT_ORDER'|'DEFAULT_ACTION_ORDER'
}
}
},
'NetworkFirewallInternetTrafficNotInspectedViolation': {
'SubnetId': 'string',
'SubnetAvailabilityZone': 'string',
'RouteTableId': 'string',
'ViolatingRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'IsRouteTableUsedInDifferentAZ': True|False,
'CurrentFirewallSubnetRouteTable': 'string',
'ExpectedFirewallEndpoint': 'string',
'FirewallSubnetId': 'string',
'ExpectedFirewallSubnetRoutes': [
{
'IpV4Cidr': 'string',
'PrefixListId': 'string',
'IpV6Cidr': 'string',
'ContributingSubnets': [
'string',
],
'AllowedTargets': [
'string',
],
'RouteTableId': 'string'
},
],
'ActualFirewallSubnetRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'InternetGatewayId': 'string',
'CurrentInternetGatewayRouteTable': 'string',
'ExpectedInternetGatewayRoutes': [
{
'IpV4Cidr': 'string',
'PrefixListId': 'string',
'IpV6Cidr': 'string',
'ContributingSubnets': [
'string',
],
'AllowedTargets': [
'string',
],
'RouteTableId': 'string'
},
],
'ActualInternetGatewayRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'VpcId': 'string'
},
'NetworkFirewallInvalidRouteConfigurationViolation': {
'AffectedSubnets': [
'string',
],
'RouteTableId': 'string',
'IsRouteTableUsedInDifferentAZ': True|False,
'ViolatingRoute': {
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
'CurrentFirewallSubnetRouteTable': 'string',
'ExpectedFirewallEndpoint': 'string',
'ActualFirewallEndpoint': 'string',
'ExpectedFirewallSubnetId': 'string',
'ActualFirewallSubnetId': 'string',
'ExpectedFirewallSubnetRoutes': [
{
'IpV4Cidr': 'string',
'PrefixListId': 'string',
'IpV6Cidr': 'string',
'ContributingSubnets': [
'string',
],
'AllowedTargets': [
'string',
],
'RouteTableId': 'string'
},
],
'ActualFirewallSubnetRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'InternetGatewayId': 'string',
'CurrentInternetGatewayRouteTable': 'string',
'ExpectedInternetGatewayRoutes': [
{
'IpV4Cidr': 'string',
'PrefixListId': 'string',
'IpV6Cidr': 'string',
'ContributingSubnets': [
'string',
],
'AllowedTargets': [
'string',
],
'RouteTableId': 'string'
},
],
'ActualInternetGatewayRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'VpcId': 'string'
},
'NetworkFirewallBlackHoleRouteDetectedViolation': {
'ViolationTarget': 'string',
'RouteTableId': 'string',
'VpcId': 'string',
'ViolatingRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
]
},
'NetworkFirewallUnexpectedFirewallRoutesViolation': {
'FirewallSubnetId': 'string',
'ViolatingRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'RouteTableId': 'string',
'FirewallEndpoint': 'string',
'VpcId': 'string'
},
'NetworkFirewallUnexpectedGatewayRoutesViolation': {
'GatewayId': 'string',
'ViolatingRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'RouteTableId': 'string',
'VpcId': 'string'
},
'NetworkFirewallMissingExpectedRoutesViolation': {
'ViolationTarget': 'string',
'ExpectedRoutes': [
{
'IpV4Cidr': 'string',
'PrefixListId': 'string',
'IpV6Cidr': 'string',
'ContributingSubnets': [
'string',
],
'AllowedTargets': [
'string',
],
'RouteTableId': 'string'
},
],
'VpcId': 'string'
},
'DnsRuleGroupPriorityConflictViolation': {
'ViolationTarget': 'string',
'ViolationTargetDescription': 'string',
'ConflictingPriority': 123,
'ConflictingPolicyId': 'string',
'UnavailablePriorities': [
123,
]
},
'DnsDuplicateRuleGroupViolation': {
'ViolationTarget': 'string',
'ViolationTargetDescription': 'string'
},
'DnsRuleGroupLimitExceededViolation': {
'ViolationTarget': 'string',
'ViolationTargetDescription': 'string',
'NumberOfRuleGroupsAlreadyAssociated': 123
},
'FirewallSubnetIsOutOfScopeViolation': {
'FirewallSubnetId': 'string',
'VpcId': 'string',
'SubnetAvailabilityZone': 'string',
'SubnetAvailabilityZoneId': 'string',
'VpcEndpointId': 'string'
},
'RouteHasOutOfScopeEndpointViolation': {
'SubnetId': 'string',
'VpcId': 'string',
'RouteTableId': 'string',
'ViolatingRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'SubnetAvailabilityZone': 'string',
'SubnetAvailabilityZoneId': 'string',
'CurrentFirewallSubnetRouteTable': 'string',
'FirewallSubnetId': 'string',
'FirewallSubnetRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
],
'InternetGatewayId': 'string',
'CurrentInternetGatewayRouteTable': 'string',
'InternetGatewayRoutes': [
{
'DestinationType': 'IPV4'|'IPV6'|'PREFIX_LIST',
'TargetType': 'GATEWAY'|'CARRIER_GATEWAY'|'INSTANCE'|'LOCAL_GATEWAY'|'NAT_GATEWAY'|'NETWORK_INTERFACE'|'VPC_ENDPOINT'|'VPC_PEERING_CONNECTION'|'EGRESS_ONLY_INTERNET_GATEWAY'|'TRANSIT_GATEWAY',
'Destination': 'string',
'Target': 'string'
},
]
},
'ThirdPartyFirewallMissingFirewallViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'TargetViolationReason': 'string'
},
'ThirdPartyFirewallMissingSubnetViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'TargetViolationReason': 'string'
},
'ThirdPartyFirewallMissingExpectedRouteTableViolation': {
'ViolationTarget': 'string',
'VPC': 'string',
'AvailabilityZone': 'string',
'CurrentRouteTable': 'string',
'ExpectedRouteTable': 'string'
},
'FirewallSubnetMissingVPCEndpointViolation': {
'FirewallSubnetId': 'string',
'VpcId': 'string',
'SubnetAvailabilityZone': 'string',
'SubnetAvailabilityZoneId': 'string'
},
'InvalidNetworkAclEntriesViolation': {
'Vpc': 'string',
'Subnet': 'string',
'SubnetAvailabilityZone': 'string',
'CurrentAssociatedNetworkAcl': 'string',
'EntryViolations': [
{
'ExpectedEntry': {
'EntryDetail': {
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
'EntryRuleNumber': 123,
'EntryType': 'FMS_MANAGED_FIRST_ENTRY'|'FMS_MANAGED_LAST_ENTRY'|'CUSTOM_ENTRY'
},
'ExpectedEvaluationOrder': 'string',
'ActualEvaluationOrder': 'string',
'EntryAtExpectedEvaluationOrder': {
'EntryDetail': {
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
'EntryRuleNumber': 123,
'EntryType': 'FMS_MANAGED_FIRST_ENTRY'|'FMS_MANAGED_LAST_ENTRY'|'CUSTOM_ENTRY'
},
'EntriesWithConflicts': [
{
'EntryDetail': {
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
'EntryRuleNumber': 123,
'EntryType': 'FMS_MANAGED_FIRST_ENTRY'|'FMS_MANAGED_LAST_ENTRY'|'CUSTOM_ENTRY'
},
],
'EntryViolationReasons': [
'MISSING_EXPECTED_ENTRY'|'INCORRECT_ENTRY_ORDER'|'ENTRY_CONFLICT',
]
},
]
},
'PossibleRemediationActions': {
'Description': 'string',
'Actions': [
{
'Description': 'string',
'OrderedRemediationActions': [
{
'RemediationAction': {
'Description': 'string',
'EC2CreateRouteAction': {
'Description': 'string',
'DestinationCidrBlock': 'string',
'DestinationPrefixListId': 'string',
'DestinationIpv6CidrBlock': 'string',
'VpcEndpointId': {
'ResourceId': 'string',
'Description': 'string'
},
'GatewayId': {
'ResourceId': 'string',
'Description': 'string'
},
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2ReplaceRouteAction': {
'Description': 'string',
'DestinationCidrBlock': 'string',
'DestinationPrefixListId': 'string',
'DestinationIpv6CidrBlock': 'string',
'GatewayId': {
'ResourceId': 'string',
'Description': 'string'
},
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2DeleteRouteAction': {
'Description': 'string',
'DestinationCidrBlock': 'string',
'DestinationPrefixListId': 'string',
'DestinationIpv6CidrBlock': 'string',
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2CopyRouteTableAction': {
'Description': 'string',
'VpcId': {
'ResourceId': 'string',
'Description': 'string'
},
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2ReplaceRouteTableAssociationAction': {
'Description': 'string',
'AssociationId': {
'ResourceId': 'string',
'Description': 'string'
},
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2AssociateRouteTableAction': {
'Description': 'string',
'RouteTableId': {
'ResourceId': 'string',
'Description': 'string'
},
'SubnetId': {
'ResourceId': 'string',
'Description': 'string'
},
'GatewayId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'EC2CreateRouteTableAction': {
'Description': 'string',
'VpcId': {
'ResourceId': 'string',
'Description': 'string'
}
},
'FMSPolicyUpdateFirewallCreationConfigAction': {
'Description': 'string',
'FirewallCreationConfig': 'string'
},
'CreateNetworkAclAction': {
'Description': 'string',
'Vpc': {
'ResourceId': 'string',
'Description': 'string'
},
'FMSCanRemediate': True|False
},
'ReplaceNetworkAclAssociationAction': {
'Description': 'string',
'AssociationId': {
'ResourceId': 'string',
'Description': 'string'
},
'NetworkAclId': {
'ResourceId': 'string',
'Description': 'string'
},
'FMSCanRemediate': True|False
},
'CreateNetworkAclEntriesAction': {
'Description': 'string',
'NetworkAclId': {
'ResourceId': 'string',
'Description': 'string'
},
'NetworkAclEntriesToBeCreated': [
{
'EntryDetail': {
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
'EntryRuleNumber': 123,
'EntryType': 'FMS_MANAGED_FIRST_ENTRY'|'FMS_MANAGED_LAST_ENTRY'|'CUSTOM_ENTRY'
},
],
'FMSCanRemediate': True|False
},
'DeleteNetworkAclEntriesAction': {
'Description': 'string',
'NetworkAclId': {
'ResourceId': 'string',
'Description': 'string'
},
'NetworkAclEntriesToBeDeleted': [
{
'EntryDetail': {
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
'EntryRuleNumber': 123,
'EntryType': 'FMS_MANAGED_FIRST_ENTRY'|'FMS_MANAGED_LAST_ENTRY'|'CUSTOM_ENTRY'
},
],
'FMSCanRemediate': True|False
}
},
'Order': 123
},
],
'IsDefaultAction': True|False
},
]
}
},
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ResourceDescription': 'string'
}
}
Response Structure
(dict) --
ViolationDetail (dict) --
Violation detail for a resource.
PolicyId (string) --
The ID of the Firewall Manager policy that the violation details were requested for.
MemberAccount (string) --
The Amazon Web Services account that the violation details were requested for.
ResourceId (string) --
The resource ID that the violation details were requested for.
ResourceType (string) --
The resource type that the violation details were requested for.
ResourceViolations (list) --
List of violations for the requested resource.
(dict) --
Violation detail based on resource type.
AwsVPCSecurityGroupViolation (dict) --
Violation detail for security groups.
ViolationTarget (string) --
The security group rule that is being evaluated.
ViolationTargetDescription (string) --
A description of the security group that violates the policy.
PartialMatches (list) --
List of rules specified in the security group of the Firewall Manager policy that partially match the ViolationTarget rule.
(dict) --
The reference rule that partially matches the ViolationTarget rule and violation reason.
Reference (string) --
The reference rule from the primary security group of the Firewall Manager policy.
TargetViolationReasons (list) --
The violation reason.
(string) --
PossibleSecurityGroupRemediationActions (list) --
Remediation options for the rule specified in the ViolationTarget.
(dict) --
Remediation option for the rule specified in the ViolationTarget.
RemediationActionType (string) --
The remediation action that will be performed.
Description (string) --
Brief description of the action that will be performed.
RemediationResult (dict) --
The final state of the rule specified in the ViolationTarget after it is remediated.
IPV4Range (string) --
The IPv4 ranges for the security group rule.
IPV6Range (string) --
The IPv6 ranges for the security group rule.
PrefixListId (string) --
The ID of the prefix list for the security group rule.
Protocol (string) --
The IP protocol name ( tcp, udp, icmp, icmpv6) or number.
FromPort (integer) --
The start of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 type number. A value of -1 indicates all ICMP/ICMPv6 types.
ToPort (integer) --
The end of the port range for the TCP and UDP protocols, or an ICMP/ICMPv6 code. A value of -1 indicates all ICMP/ICMPv6 codes.
IsDefaultAction (boolean) --
Indicates if the current action is the default action.
AwsEc2NetworkInterfaceViolation (dict) --
Violation detail for a network interface.
ViolationTarget (string) --
The resource ID of the network interface.
ViolatingSecurityGroups (list) --
List of security groups that violate the rules specified in the primary security group of the Firewall Manager policy.
(string) --
AwsEc2InstanceViolation (dict) --
Violation detail for an EC2 instance.
ViolationTarget (string) --
The resource ID of the EC2 instance.
AwsEc2NetworkInterfaceViolations (list) --
Violation detail for network interfaces associated with the EC2 instance.
(dict) --
Violation detail for network interfaces associated with an EC2 instance.
ViolationTarget (string) --
The resource ID of the network interface.
ViolatingSecurityGroups (list) --
List of security groups that violate the rules specified in the primary security group of the Firewall Manager policy.
(string) --
NetworkFirewallMissingFirewallViolation (dict) --
Violation detail for an Network Firewall policy that indicates that a subnet has no Firewall Manager managed firewall in its VPC.
ViolationTarget (string) --
The ID of the Network Firewall or VPC resource that's in violation.
VPC (string) --
The resource ID of the VPC associated with a violating subnet.
AvailabilityZone (string) --
The Availability Zone of a violating subnet.
TargetViolationReason (string) --
The reason the resource has this violation, if one is available.
NetworkFirewallMissingSubnetViolation (dict) --
Violation detail for an Network Firewall policy that indicates that an Availability Zone is missing the expected Firewall Manager managed subnet.
ViolationTarget (string) --
The ID of the Network Firewall or VPC resource that's in violation.
VPC (string) --
The resource ID of the VPC associated with a violating subnet.
AvailabilityZone (string) --
The Availability Zone of a violating subnet.
TargetViolationReason (string) --
The reason the resource has this violation, if one is available.
NetworkFirewallMissingExpectedRTViolation (dict) --
Violation detail for an Network Firewall policy that indicates that a subnet is not associated with the expected Firewall Manager managed route table.
ViolationTarget (string) --
The ID of the Network Firewall or VPC resource that's in violation.
VPC (string) --
The resource ID of the VPC associated with a violating subnet.
AvailabilityZone (string) --
The Availability Zone of a violating subnet.
CurrentRouteTable (string) --
The resource ID of the current route table that's associated with the subnet, if one is available.
ExpectedRouteTable (string) --
The resource ID of the route table that should be associated with the subnet.
NetworkFirewallPolicyModifiedViolation (dict) --
Violation detail for an Network Firewall policy that indicates that a firewall policy in an individual account has been modified in a way that makes it noncompliant. For example, the individual account owner might have deleted a rule group, changed the priority of a stateless rule group, or changed a policy default action.
ViolationTarget (string) --
The ID of the Network Firewall or VPC resource that's in violation.
CurrentPolicyDescription (dict) --
The policy that's currently in use in the individual account.
StatelessRuleGroups (list) --
The stateless rule groups that are used in the Network Firewall firewall policy.
(dict) --
Network Firewall stateless rule group, used in a NetworkFirewallPolicyDescription.
RuleGroupName (string) --
The name of the rule group.
ResourceId (string) --
The resource ID of the rule group.
Priority (integer) --
The priority of the rule group. Network Firewall evaluates the stateless rule groups in a firewall policy starting from the lowest priority setting.
StatelessDefaultActions (list) --
The actions to take on packets that don't match any of the stateless rule groups.
(string) --
StatelessFragmentDefaultActions (list) --
The actions to take on packet fragments that don't match any of the stateless rule groups.
(string) --
StatelessCustomActions (list) --
Names of custom actions that are available for use in the stateless default actions settings.
(string) --
StatefulRuleGroups (list) --
The stateful rule groups that are used in the Network Firewall firewall policy.
(dict) --
Network Firewall stateful rule group, used in a NetworkFirewallPolicyDescription.
RuleGroupName (string) --
The name of the rule group.
ResourceId (string) --
The resource ID of the rule group.
Priority (integer) --
An integer setting that indicates the order in which to run the stateful rule groups in a single Network Firewall firewall policy. This setting only applies to firewall policies that specify the STRICT_ORDER rule order in the stateful engine options settings.
Network Firewall evalutes each stateful rule group against a packet starting with the group that has the lowest priority setting. You must ensure that the priority settings are unique within each policy. For information about
You can change the priority settings of your rule groups at any time. To make it easier to insert rule groups later, number them so there's a wide range in between, for example use 100, 200, and so on.
Override (dict) --
The action that allows the policy owner to override the behavior of the rule group within a policy.
Action (string) --
The action that changes the rule group from DROP to ALERT. This only applies to managed rule groups.
StatefulDefaultActions (list) --
The default actions to take on a packet that doesn't match any stateful rules. The stateful default action is optional, and is only valid when using the strict rule order.
Valid values of the stateful default action:
aws:drop_strict
aws:drop_established
aws:alert_strict
aws:alert_established
(string) --
StatefulEngineOptions (dict) --
Additional options governing how Network Firewall handles stateful rules. The stateful rule groups that you use in your policy must have stateful rule options settings that are compatible with these settings.
RuleOrder (string) --
Indicates how to manage the order of stateful rule evaluation for the policy. DEFAULT_ACTION_ORDER is the default behavior. Stateful rules are provided to the rule engine as Suricata compatible strings, and Suricata evaluates them based on certain settings. For more information, see Evaluation order for stateful rules in the Network Firewall Developer Guide.
ExpectedPolicyDescription (dict) --
The policy that should be in use in the individual account in order to be compliant.
StatelessRuleGroups (list) --
The stateless rule groups that are used in the Network Firewall firewall policy.
(dict) --
Network Firewall stateless rule group, used in a NetworkFirewallPolicyDescription.
RuleGroupName (string) --
The name of the rule group.
ResourceId (string) --
The resource ID of the rule group.
Priority (integer) --
The priority of the rule group. Network Firewall evaluates the stateless rule groups in a firewall policy starting from the lowest priority setting.
StatelessDefaultActions (list) --
The actions to take on packets that don't match any of the stateless rule groups.
(string) --
StatelessFragmentDefaultActions (list) --
The actions to take on packet fragments that don't match any of the stateless rule groups.
(string) --
StatelessCustomActions (list) --
Names of custom actions that are available for use in the stateless default actions settings.
(string) --
StatefulRuleGroups (list) --
The stateful rule groups that are used in the Network Firewall firewall policy.
(dict) --
Network Firewall stateful rule group, used in a NetworkFirewallPolicyDescription.
RuleGroupName (string) --
The name of the rule group.
ResourceId (string) --
The resource ID of the rule group.
Priority (integer) --
An integer setting that indicates the order in which to run the stateful rule groups in a single Network Firewall firewall policy. This setting only applies to firewall policies that specify the STRICT_ORDER rule order in the stateful engine options settings.
Network Firewall evalutes each stateful rule group against a packet starting with the group that has the lowest priority setting. You must ensure that the priority settings are unique within each policy. For information about
You can change the priority settings of your rule groups at any time. To make it easier to insert rule groups later, number them so there's a wide range in between, for example use 100, 200, and so on.
Override (dict) --
The action that allows the policy owner to override the behavior of the rule group within a policy.
Action (string) --
The action that changes the rule group from DROP to ALERT. This only applies to managed rule groups.
StatefulDefaultActions (list) --
The default actions to take on a packet that doesn't match any stateful rules. The stateful default action is optional, and is only valid when using the strict rule order.
Valid values of the stateful default action:
aws:drop_strict
aws:drop_established
aws:alert_strict
aws:alert_established
(string) --
StatefulEngineOptions (dict) --
Additional options governing how Network Firewall handles stateful rules. The stateful rule groups that you use in your policy must have stateful rule options settings that are compatible with these settings.
RuleOrder (string) --
Indicates how to manage the order of stateful rule evaluation for the policy. DEFAULT_ACTION_ORDER is the default behavior. Stateful rules are provided to the rule engine as Suricata compatible strings, and Suricata evaluates them based on certain settings. For more information, see Evaluation order for stateful rules in the Network Firewall Developer Guide.
NetworkFirewallInternetTrafficNotInspectedViolation (dict) --
Violation detail for the subnet for which internet traffic hasn't been inspected.
SubnetId (string) --
The subnet ID.
SubnetAvailabilityZone (string) --
The subnet Availability Zone.
RouteTableId (string) --
Information about the route table ID.
ViolatingRoutes (list) --
The route or routes that are in violation.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
IsRouteTableUsedInDifferentAZ (boolean) --
Information about whether the route table is used in another Availability Zone.
CurrentFirewallSubnetRouteTable (string) --
Information about the subnet route table for the current firewall.
ExpectedFirewallEndpoint (string) --
The expected endpoint for the current firewall.
FirewallSubnetId (string) --
The firewall subnet ID.
ExpectedFirewallSubnetRoutes (list) --
The firewall subnet routes that are expected.
(dict) --
Information about the expected route in the route table.
IpV4Cidr (string) --
Information about the IPv4 CIDR block.
PrefixListId (string) --
Information about the ID of the prefix list for the route.
IpV6Cidr (string) --
Information about the IPv6 CIDR block.
ContributingSubnets (list) --
Information about the contributing subnets.
(string) --
AllowedTargets (list) --
Information about the allowed targets.
(string) --
RouteTableId (string) --
Information about the route table ID.
ActualFirewallSubnetRoutes (list) --
The actual firewall subnet routes.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
InternetGatewayId (string) --
The internet gateway ID.
CurrentInternetGatewayRouteTable (string) --
The current route table for the internet gateway.
ExpectedInternetGatewayRoutes (list) --
The internet gateway routes that are expected.
(dict) --
Information about the expected route in the route table.
IpV4Cidr (string) --
Information about the IPv4 CIDR block.
PrefixListId (string) --
Information about the ID of the prefix list for the route.
IpV6Cidr (string) --
Information about the IPv6 CIDR block.
ContributingSubnets (list) --
Information about the contributing subnets.
(string) --
AllowedTargets (list) --
Information about the allowed targets.
(string) --
RouteTableId (string) --
Information about the route table ID.
ActualInternetGatewayRoutes (list) --
The actual internet gateway routes.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
VpcId (string) --
Information about the VPC ID.
NetworkFirewallInvalidRouteConfigurationViolation (dict) --
The route configuration is invalid.
AffectedSubnets (list) --
The subnets that are affected.
(string) --
RouteTableId (string) --
The route table ID.
IsRouteTableUsedInDifferentAZ (boolean) --
Information about whether the route table is used in another Availability Zone.
ViolatingRoute (dict) --
The route that's in violation.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
CurrentFirewallSubnetRouteTable (string) --
The subnet route table for the current firewall.
ExpectedFirewallEndpoint (string) --
The firewall endpoint that's expected.
ActualFirewallEndpoint (string) --
The actual firewall endpoint.
ExpectedFirewallSubnetId (string) --
The expected subnet ID for the firewall.
ActualFirewallSubnetId (string) --
The actual subnet ID for the firewall.
ExpectedFirewallSubnetRoutes (list) --
The firewall subnet routes that are expected.
(dict) --
Information about the expected route in the route table.
IpV4Cidr (string) --
Information about the IPv4 CIDR block.
PrefixListId (string) --
Information about the ID of the prefix list for the route.
IpV6Cidr (string) --
Information about the IPv6 CIDR block.
ContributingSubnets (list) --
Information about the contributing subnets.
(string) --
AllowedTargets (list) --
Information about the allowed targets.
(string) --
RouteTableId (string) --
Information about the route table ID.
ActualFirewallSubnetRoutes (list) --
The actual firewall subnet routes that are expected.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
InternetGatewayId (string) --
The internet gateway ID.
CurrentInternetGatewayRouteTable (string) --
The route table for the current internet gateway.
ExpectedInternetGatewayRoutes (list) --
The expected routes for the internet gateway.
(dict) --
Information about the expected route in the route table.
IpV4Cidr (string) --
Information about the IPv4 CIDR block.
PrefixListId (string) --
Information about the ID of the prefix list for the route.
IpV6Cidr (string) --
Information about the IPv6 CIDR block.
ContributingSubnets (list) --
Information about the contributing subnets.
(string) --
AllowedTargets (list) --
Information about the allowed targets.
(string) --
RouteTableId (string) --
Information about the route table ID.
ActualInternetGatewayRoutes (list) --
The actual internet gateway routes.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
VpcId (string) --
Information about the VPC ID.
NetworkFirewallBlackHoleRouteDetectedViolation (dict) --
Violation detail for an internet gateway route with an inactive state in the customer subnet route table or Network Firewall subnet route table.
ViolationTarget (string) --
The subnet that has an inactive state.
RouteTableId (string) --
Information about the route table ID.
VpcId (string) --
Information about the VPC ID.
ViolatingRoutes (list) --
Information about the route or routes that are in violation.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
NetworkFirewallUnexpectedFirewallRoutesViolation (dict) --
There's an unexpected firewall route.
FirewallSubnetId (string) --
The subnet ID for the firewall.
ViolatingRoutes (list) --
The routes that are in violation.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
RouteTableId (string) --
The ID of the route table.
FirewallEndpoint (string) --
The endpoint of the firewall.
VpcId (string) --
Information about the VPC ID.
NetworkFirewallUnexpectedGatewayRoutesViolation (dict) --
There's an unexpected gateway route.
GatewayId (string) --
Information about the gateway ID.
ViolatingRoutes (list) --
The routes that are in violation.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
RouteTableId (string) --
Information about the route table.
VpcId (string) --
Information about the VPC ID.
NetworkFirewallMissingExpectedRoutesViolation (dict) --
Expected routes are missing from Network Firewall.
ViolationTarget (string) --
The target of the violation.
ExpectedRoutes (list) --
The expected routes.
(dict) --
Information about the expected route in the route table.
IpV4Cidr (string) --
Information about the IPv4 CIDR block.
PrefixListId (string) --
Information about the ID of the prefix list for the route.
IpV6Cidr (string) --
Information about the IPv6 CIDR block.
ContributingSubnets (list) --
Information about the contributing subnets.
(string) --
AllowedTargets (list) --
Information about the allowed targets.
(string) --
RouteTableId (string) --
Information about the route table ID.
VpcId (string) --
Information about the VPC ID.
DnsRuleGroupPriorityConflictViolation (dict) --
Violation detail for a DNS Firewall policy that indicates that a rule group that Firewall Manager tried to associate with a VPC has the same priority as a rule group that's already associated.
ViolationTarget (string) --
Information about the VPC ID.
ViolationTargetDescription (string) --
A description of the violation that specifies the VPC and the rule group that's already associated with it.
ConflictingPriority (integer) --
The priority setting of the two conflicting rule groups.
ConflictingPolicyId (string) --
The ID of the Firewall Manager DNS Firewall policy that was already applied to the VPC. This policy contains the rule group that's already associated with the VPC.
UnavailablePriorities (list) --
The priorities of rule groups that are already associated with the VPC. To retry your operation, choose priority settings that aren't in this list for the rule groups in your new DNS Firewall policy.
(integer) --
DnsDuplicateRuleGroupViolation (dict) --
Violation detail for a DNS Firewall policy that indicates that a rule group that Firewall Manager tried to associate with a VPC is already associated with the VPC and can't be associated again.
ViolationTarget (string) --
Information about the VPC ID.
ViolationTargetDescription (string) --
A description of the violation that specifies the rule group and VPC.
DnsRuleGroupLimitExceededViolation (dict) --
Violation detail for a DNS Firewall policy that indicates that the VPC reached the limit for associated DNS Firewall rule groups. Firewall Manager tried to associate another rule group with the VPC and failed.
ViolationTarget (string) --
Information about the VPC ID.
ViolationTargetDescription (string) --
A description of the violation that specifies the rule group and VPC.
NumberOfRuleGroupsAlreadyAssociated (integer) --
The number of rule groups currently associated with the VPC.
FirewallSubnetIsOutOfScopeViolation (dict) --
Contains details about the firewall subnet that violates the policy scope.
FirewallSubnetId (string) --
The ID of the firewall subnet that violates the policy scope.
VpcId (string) --
The VPC ID of the firewall subnet that violates the policy scope.
SubnetAvailabilityZone (string) --
The Availability Zone of the firewall subnet that violates the policy scope.
SubnetAvailabilityZoneId (string) --
The Availability Zone ID of the firewall subnet that violates the policy scope.
VpcEndpointId (string) --
The VPC endpoint ID of the firewall subnet that violates the policy scope.
RouteHasOutOfScopeEndpointViolation (dict) --
Contains details about the route endpoint that violates the policy scope.
SubnetId (string) --
The ID of the subnet associated with the route that violates the policy scope.
VpcId (string) --
The VPC ID of the route that violates the policy scope.
RouteTableId (string) --
The ID of the route table.
ViolatingRoutes (list) --
The list of routes that violate the route table.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
SubnetAvailabilityZone (string) --
The subnet's Availability Zone.
SubnetAvailabilityZoneId (string) --
The ID of the subnet's Availability Zone.
CurrentFirewallSubnetRouteTable (string) --
The route table associated with the current firewall subnet.
FirewallSubnetId (string) --
The ID of the firewall subnet.
FirewallSubnetRoutes (list) --
The list of firewall subnet routes.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
InternetGatewayId (string) --
The ID of the Internet Gateway.
CurrentInternetGatewayRouteTable (string) --
The current route table associated with the Internet Gateway.
InternetGatewayRoutes (list) --
The routes in the route table associated with the Internet Gateway.
(dict) --
Describes a route in a route table.
DestinationType (string) --
The type of destination for the route.
TargetType (string) --
The type of target for the route.
Destination (string) --
The destination of the route.
Target (string) --
The route's target.
ThirdPartyFirewallMissingFirewallViolation (dict) --
The violation details for a third-party firewall that's been deleted.
ViolationTarget (string) --
The ID of the third-party firewall that's causing the violation.
VPC (string) --
The resource ID of the VPC associated with a third-party firewall.
AvailabilityZone (string) --
The Availability Zone of the third-party firewall that's causing the violation.
TargetViolationReason (string) --
The reason the resource is causing this violation, if a reason is available.
ThirdPartyFirewallMissingSubnetViolation (dict) --
The violation details for a third-party firewall's subnet that's been deleted.
ViolationTarget (string) --
The ID of the third-party firewall or VPC resource that's causing the violation.
VPC (string) --
The resource ID of the VPC associated with a subnet that's causing the violation.
AvailabilityZone (string) --
The Availability Zone of a subnet that's causing the violation.
TargetViolationReason (string) --
The reason the resource is causing the violation, if a reason is available.
ThirdPartyFirewallMissingExpectedRouteTableViolation (dict) --
The violation details for a third-party firewall that has the Firewall Manager managed route table that was associated with the third-party firewall has been deleted.
ViolationTarget (string) --
The ID of the third-party firewall or VPC resource that's causing the violation.
VPC (string) --
The resource ID of the VPC associated with a fireawll subnet that's causing the violation.
AvailabilityZone (string) --
The Availability Zone of the firewall subnet that's causing the violation.
CurrentRouteTable (string) --
The resource ID of the current route table that's associated with the subnet, if one is available.
ExpectedRouteTable (string) --
The resource ID of the route table that should be associated with the subnet.
FirewallSubnetMissingVPCEndpointViolation (dict) --
The violation details for a third-party firewall's VPC endpoint subnet that was deleted.
FirewallSubnetId (string) --
The ID of the firewall that this VPC endpoint is associated with.
VpcId (string) --
The resource ID of the VPC associated with the deleted VPC subnet.
SubnetAvailabilityZone (string) --
The name of the Availability Zone of the deleted VPC subnet.
SubnetAvailabilityZoneId (string) --
The ID of the Availability Zone of the deleted VPC subnet.
InvalidNetworkAclEntriesViolation (dict) --
Violation detail for the entries in a network ACL resource.
Vpc (string) --
The VPC where the violation was found.
Subnet (string) --
The subnet that's associated with the network ACL.
SubnetAvailabilityZone (string) --
The Availability Zone where the network ACL is in use.
CurrentAssociatedNetworkAcl (string) --
The network ACL containing the entry violations.
EntryViolations (list) --
Detailed information about the entry violations in the network ACL.
(dict) --
Detailed information about an entry violation in a network ACL. The violation is against the network ACL specification inside the Firewall Manager network ACL policy. This data object is part of InvalidNetworkAclEntriesViolation.
ExpectedEntry (dict) --
The Firewall Manager-managed network ACL entry that is involved in the entry violation.
EntryDetail (dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
EntryRuleNumber (integer) --
The rule number for the entry. ACL entries are processed in ascending order by rule number. In a Firewall Manager network ACL policy, Firewall Manager assigns rule numbers.
EntryType (string) --
Specifies whether the entry is managed by Firewall Manager or by a user, and, for Firewall Manager-managed entries, specifies whether the entry is among those that run first in the network ACL or those that run last.
ExpectedEvaluationOrder (string) --
The evaluation location within the ordered list of entries where the ExpectedEntry should be, according to the network ACL policy specifications.
ActualEvaluationOrder (string) --
The evaluation location within the ordered list of entries where the ExpectedEntry is currently located.
EntryAtExpectedEvaluationOrder (dict) --
The entry that's currently in the ExpectedEvaluationOrder location, in place of the expected entry.
EntryDetail (dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
EntryRuleNumber (integer) --
The rule number for the entry. ACL entries are processed in ascending order by rule number. In a Firewall Manager network ACL policy, Firewall Manager assigns rule numbers.
EntryType (string) --
Specifies whether the entry is managed by Firewall Manager or by a user, and, for Firewall Manager-managed entries, specifies whether the entry is among those that run first in the network ACL or those that run last.
EntriesWithConflicts (list) --
The list of entries that are in conflict with ExpectedEntry.
(dict) --
Describes a single rule in a network ACL.
EntryDetail (dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
EntryRuleNumber (integer) --
The rule number for the entry. ACL entries are processed in ascending order by rule number. In a Firewall Manager network ACL policy, Firewall Manager assigns rule numbers.
EntryType (string) --
Specifies whether the entry is managed by Firewall Manager or by a user, and, for Firewall Manager-managed entries, specifies whether the entry is among those that run first in the network ACL or those that run last.
EntryViolationReasons (list) --
Descriptions of the violations that Firewall Manager found for these entries.
(string) --
PossibleRemediationActions (dict) --
A list of possible remediation action lists. Each individual possible remediation action is a list of individual remediation actions.
Description (string) --
A description of the possible remediation actions list.
Actions (list) --
Information about the actions.
(dict) --
A list of remediation actions.
Description (string) --
A description of the list of remediation actions.
OrderedRemediationActions (list) --
The ordered list of remediation actions.
(dict) --
An ordered list of actions you can take to remediate a violation.
RemediationAction (dict) --
Information about an action you can take to remediate a violation.
Description (string) --
A description of a remediation action.
EC2CreateRouteAction (dict) --
Information about the CreateRoute action in the Amazon EC2 API.
Description (string) --
A description of CreateRoute action in Amazon EC2.
DestinationCidrBlock (string) --
Information about the IPv4 CIDR address block used for the destination match.
DestinationPrefixListId (string) --
Information about the ID of a prefix list used for the destination match.
DestinationIpv6CidrBlock (string) --
Information about the IPv6 CIDR block destination.
VpcEndpointId (dict) --
Information about the ID of a VPC endpoint. Supported for Gateway Load Balancer endpoints only.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
GatewayId (dict) --
Information about the ID of an internet gateway or virtual private gateway attached to your VPC.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
RouteTableId (dict) --
Information about the ID of the route table for the route.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2ReplaceRouteAction (dict) --
Information about the ReplaceRoute action in the Amazon EC2 API.
Description (string) --
A description of the ReplaceRoute action in Amazon EC2.
DestinationCidrBlock (string) --
Information about the IPv4 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.
DestinationPrefixListId (string) --
Information about the ID of the prefix list for the route.
DestinationIpv6CidrBlock (string) --
Information about the IPv6 CIDR address block used for the destination match. The value that you provide must match the CIDR of an existing route in the table.
GatewayId (dict) --
Information about the ID of an internet gateway or virtual private gateway.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
RouteTableId (dict) --
Information about the ID of the route table.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2DeleteRouteAction (dict) --
Information about the DeleteRoute action in the Amazon EC2 API.
Description (string) --
A description of the DeleteRoute action.
DestinationCidrBlock (string) --
Information about the IPv4 CIDR range for the route. The value you specify must match the CIDR for the route exactly.
DestinationPrefixListId (string) --
Information about the ID of the prefix list for the route.
DestinationIpv6CidrBlock (string) --
Information about the IPv6 CIDR range for the route. The value you specify must match the CIDR for the route exactly.
RouteTableId (dict) --
Information about the ID of the route table.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2CopyRouteTableAction (dict) --
Information about the CopyRouteTable action in the Amazon EC2 API.
Description (string) --
A description of the copied EC2 route table that is associated with the remediation action.
VpcId (dict) --
The VPC ID of the copied EC2 route table that is associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
RouteTableId (dict) --
The ID of the copied EC2 route table that is associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2ReplaceRouteTableAssociationAction (dict) --
Information about the ReplaceRouteTableAssociation action in the Amazon EC2 API.
Description (string) --
A description of the ReplaceRouteTableAssociation action in Amazon EC2.
AssociationId (dict) --
Information about the association ID.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
RouteTableId (dict) --
Information about the ID of the new route table to associate with the subnet.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2AssociateRouteTableAction (dict) --
Information about the AssociateRouteTable action in the Amazon EC2 API.
Description (string) --
A description of the EC2 route table that is associated with the remediation action.
RouteTableId (dict) --
The ID of the EC2 route table that is associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
SubnetId (dict) --
The ID of the subnet for the EC2 route table that is associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
GatewayId (dict) --
The ID of the gateway to be used with the EC2 route table that is associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
EC2CreateRouteTableAction (dict) --
Information about the CreateRouteTable action in the Amazon EC2 API.
Description (string) --
A description of the CreateRouteTable action.
VpcId (dict) --
Information about the ID of a VPC.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
FMSPolicyUpdateFirewallCreationConfigAction (dict) --
The remedial action to take when updating a firewall configuration.
Description (string) --
Describes the remedial action.
FirewallCreationConfig (string) --
A FirewallCreationConfig that you can copy into your current policy's SecurityServiceData in order to remedy scope violations.
CreateNetworkAclAction (dict) --
Information about the CreateNetworkAcl action in Amazon EC2.
Description (string) --
Brief description of this remediation action.
Vpc (dict) --
The VPC that's associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
FMSCanRemediate (boolean) --
Indicates whether it is possible for Firewall Manager to perform this remediation action. A false value indicates that auto remediation is disabled or Firewall Manager is unable to perform the action due to a conflict of some kind.
ReplaceNetworkAclAssociationAction (dict) --
Information about the ReplaceNetworkAclAssociation action in Amazon EC2.
Description (string) --
Brief description of this remediation action.
AssociationId (dict) --
Describes a remediation action target.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
NetworkAclId (dict) --
The network ACL that's associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
FMSCanRemediate (boolean) --
Indicates whether it is possible for Firewall Manager to perform this remediation action. A false value indicates that auto remediation is disabled or Firewall Manager is unable to perform the action due to a conflict of some kind.
CreateNetworkAclEntriesAction (dict) --
Information about the CreateNetworkAclEntries action in Amazon EC2.
Description (string) --
Brief description of this remediation action.
NetworkAclId (dict) --
The network ACL that's associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
NetworkAclEntriesToBeCreated (list) --
Lists the entries that the remediation action would create.
(dict) --
Describes a single rule in a network ACL.
EntryDetail (dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
EntryRuleNumber (integer) --
The rule number for the entry. ACL entries are processed in ascending order by rule number. In a Firewall Manager network ACL policy, Firewall Manager assigns rule numbers.
EntryType (string) --
Specifies whether the entry is managed by Firewall Manager or by a user, and, for Firewall Manager-managed entries, specifies whether the entry is among those that run first in the network ACL or those that run last.
FMSCanRemediate (boolean) --
Indicates whether it is possible for Firewall Manager to perform this remediation action. A false value indicates that auto remediation is disabled or Firewall Manager is unable to perform the action due to a conflict of some kind.
DeleteNetworkAclEntriesAction (dict) --
Information about the DeleteNetworkAclEntries action in Amazon EC2.
Description (string) --
Brief description of this remediation action.
NetworkAclId (dict) --
The network ACL that's associated with the remediation action.
ResourceId (string) --
The ID of the remediation target.
Description (string) --
A description of the remediation action target.
NetworkAclEntriesToBeDeleted (list) --
Lists the entries that the remediation action would delete.
(dict) --
Describes a single rule in a network ACL.
EntryDetail (dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
EntryRuleNumber (integer) --
The rule number for the entry. ACL entries are processed in ascending order by rule number. In a Firewall Manager network ACL policy, Firewall Manager assigns rule numbers.
EntryType (string) --
Specifies whether the entry is managed by Firewall Manager or by a user, and, for Firewall Manager-managed entries, specifies whether the entry is among those that run first in the network ACL or those that run last.
FMSCanRemediate (boolean) --
Indicates whether it is possible for Firewall Manager to perform this remediation action. A false value indicates that auto remediation is disabled or Firewall Manager is unable to perform the action due to a conflict of some kind.
Order (integer) --
The order of the remediation actions in the list.
IsDefaultAction (boolean) --
Information about whether an action is taken by default.
ResourceTags (list) --
The ResourceTag objects associated with the resource.
(dict) --
A collection of key:value pairs associated with an Amazon Web Services resource. The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each Amazon Web Services resource.
Key (string) --
Part of the key:value pair that defines a tag. You can use a tag key to describe a category of information, such as "customer." Tag keys are case-sensitive.
Value (string) --
Part of the key:value pair that defines a tag. You can use a tag value to describe a specific value within a category, such as "companyA" or "companyB." Tag values are case-sensitive.
ResourceDescription (string) --
Brief description for the requested resource.
{'PolicyList': {'SecurityServiceType': {'NETWORK_ACL_COMMON'}}}
Returns an array of PolicySummary objects.
See also: AWS API Documentation
Request Syntax
client.list_policies(
NextToken='string',
MaxResults=123
)
string
If you specify a value for MaxResults and you have more PolicySummary objects than the number that you specify for MaxResults, Firewall Manager returns a NextToken value in the response that allows you to list another group of PolicySummary objects. For the second and subsequent ListPolicies requests, specify the value of NextToken from the previous response to get information about another batch of PolicySummary objects.
integer
Specifies the number of PolicySummary objects that you want Firewall Manager to return for this request. If you have more PolicySummary objects than the number that you specify for MaxResults, the response includes a NextToken value that you can use to get another batch of PolicySummary objects.
dict
Response Syntax
{
'PolicyList': [
{
'PolicyArn': 'string',
'PolicyId': 'string',
'PolicyName': 'string',
'ResourceType': 'string',
'SecurityServiceType': 'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
'RemediationEnabled': True|False,
'DeleteUnusedFMManagedResources': True|False,
'PolicyStatus': 'ACTIVE'|'OUT_OF_ADMIN_SCOPE'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
PolicyList (list) --
An array of PolicySummary objects.
(dict) --
Details of the Firewall Manager policy.
PolicyArn (string) --
The Amazon Resource Name (ARN) of the specified policy.
PolicyId (string) --
The ID of the specified policy.
PolicyName (string) --
The name of the specified policy.
ResourceType (string) --
The type of resource protected by or in scope of the policy. This is in the format shown in the Amazon Web Services Resource Types Reference.
SecurityServiceType (string) --
The service that the policy is using to protect the resources. This specifies the type of policy that is created, either an WAF policy, a Shield Advanced policy, or a security group policy.
RemediationEnabled (boolean) --
Indicates if the policy should be automatically applied to new resources.
DeleteUnusedFMManagedResources (boolean) --
Indicates whether Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope. For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.
By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.
This option is not available for Shield Advanced or WAF Classic policies.
PolicyStatus (string) --
Indicates whether the policy is in or out of an admin's policy or Region scope.
ACTIVE - The administrator can manage and delete the policy.
OUT_OF_ADMIN_SCOPE - The administrator can view the policy, but they can't edit or delete the policy. Existing policy protections stay in place. Any new resources that come into scope of the policy won't be protected.
NextToken (string) --
If you have more PolicySummary objects than the number that you specified for MaxResults in the request, the response includes a NextToken value. To list more PolicySummary objects, submit another ListPolicies request, and specify the NextToken value from the response in the NextToken value in the next request.
{'AdminScope': {'PolicyTypeScope': {'PolicyTypes': {'NETWORK_ACL_COMMON'}}}}
Creates or updates an Firewall Manager administrator account. The account must be a member of the organization that was onboarded to Firewall Manager by AssociateAdminAccount. Only the organization's management account can create an Firewall Manager administrator account. When you create an Firewall Manager administrator account, the service checks to see if the account is already a delegated administrator within Organizations. If the account isn't a delegated administrator, Firewall Manager calls Organizations to delegate the account within Organizations. For more information about administrator accounts within Organizations, see Managing the Amazon Web Services Accounts in Your Organization.
See also: AWS API Documentation
Request Syntax
client.put_admin_account(
AdminAccount='string',
AdminScope={
'AccountScope': {
'Accounts': [
'string',
],
'AllAccountsEnabled': True|False,
'ExcludeSpecifiedAccounts': True|False
},
'OrganizationalUnitScope': {
'OrganizationalUnits': [
'string',
],
'AllOrganizationalUnitsEnabled': True|False,
'ExcludeSpecifiedOrganizationalUnits': True|False
},
'RegionScope': {
'Regions': [
'string',
],
'AllRegionsEnabled': True|False
},
'PolicyTypeScope': {
'PolicyTypes': [
'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
],
'AllPolicyTypesEnabled': True|False
}
}
)
string
[REQUIRED]
The Amazon Web Services account ID to add as an Firewall Manager administrator account. The account must be a member of the organization that was onboarded to Firewall Manager by AssociateAdminAccount. For more information about Organizations, see Managing the Amazon Web Services Accounts in Your Organization.
dict
Configures the resources that the specified Firewall Manager administrator can manage. As a best practice, set the administrative scope according to the principles of least privilege. Only grant the administrator the specific resources or permissions that they need to perform the duties of their role.
AccountScope (dict) --
Defines the accounts that the specified Firewall Manager administrator can apply policies to.
Accounts (list) --
The list of accounts within the organization that the specified Firewall Manager administrator either can or cannot apply policies to, based on the value of ExcludeSpecifiedAccounts. If ExcludeSpecifiedAccounts is set to true, then the Firewall Manager administrator can apply policies to all members of the organization except for the accounts in this list. If ExcludeSpecifiedAccounts is set to false, then the Firewall Manager administrator can only apply policies to the accounts in this list.
(string) --
AllAccountsEnabled (boolean) --
A boolean value that indicates if the administrator can apply policies to all accounts within an organization. If true, the administrator can apply policies to all accounts within the organization. You can either enable management of all accounts through this operation, or you can specify a list of accounts to manage in AccountScope$Accounts. You cannot specify both.
ExcludeSpecifiedAccounts (boolean) --
A boolean value that excludes the accounts in AccountScope$Accounts from the administrator's scope. If true, the Firewall Manager administrator can apply policies to all members of the organization except for the accounts listed in AccountScope$Accounts. You can either specify a list of accounts to exclude by AccountScope$Accounts, or you can enable management of all accounts by AccountScope$AllAccountsEnabled. You cannot specify both.
OrganizationalUnitScope (dict) --
Defines the Organizations organizational units that the specified Firewall Manager administrator can apply policies to. For more information about OUs in Organizations, see Managing organizational units (OUs) in the Organizations User Guide.
OrganizationalUnits (list) --
The list of OUs within the organization that the specified Firewall Manager administrator either can or cannot apply policies to, based on the value of OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits. If OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits is set to true, then the Firewall Manager administrator can apply policies to all OUs in the organization except for the OUs in this list. If OrganizationalUnitScope$ExcludeSpecifiedOrganizationalUnits is set to false, then the Firewall Manager administrator can only apply policies to the OUs in this list.
(string) --
AllOrganizationalUnitsEnabled (boolean) --
A boolean value that indicates if the administrator can apply policies to all OUs within an organization. If true, the administrator can manage all OUs within the organization. You can either enable management of all OUs through this operation, or you can specify OUs to manage in OrganizationalUnitScope$OrganizationalUnits. You cannot specify both.
ExcludeSpecifiedOrganizationalUnits (boolean) --
A boolean value that excludes the OUs in OrganizationalUnitScope$OrganizationalUnits from the administrator's scope. If true, the Firewall Manager administrator can apply policies to all OUs in the organization except for the OUs listed in OrganizationalUnitScope$OrganizationalUnits. You can either specify a list of OUs to exclude by OrganizationalUnitScope$OrganizationalUnits, or you can enable management of all OUs by OrganizationalUnitScope$AllOrganizationalUnitsEnabled. You cannot specify both.
RegionScope (dict) --
Defines the Amazon Web Services Regions that the specified Firewall Manager administrator can perform actions in.
Regions (list) --
The Amazon Web Services Regions that the specified Firewall Manager administrator can perform actions in.
(string) --
AllRegionsEnabled (boolean) --
Allows the specified Firewall Manager administrator to manage all Amazon Web Services Regions.
PolicyTypeScope (dict) --
Defines the Firewall Manager policy types that the specified Firewall Manager administrator can create and manage.
PolicyTypes (list) --
The list of policy types that the specified Firewall Manager administrator can manage.
(string) --
AllPolicyTypesEnabled (boolean) --
Allows the specified Firewall Manager administrator to manage all Firewall Manager policy types, except for third-party policy types. Third-party policy types can only be managed by the Firewall Manager default administrator.
None
{'Policy': {'SecurityServicePolicyData': {'PolicyOption': {'NetworkAclCommonPolicy': {'NetworkAclEntrySet': {'FirstEntries': [{'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'}],
'ForceRemediateForFirstEntries': 'boolean',
'ForceRemediateForLastEntries': 'boolean',
'LastEntries': [{'CidrBlock': 'string',
'Egress': 'boolean',
'IcmpTypeCode': {'Code': 'integer',
'Type': 'integer'},
'Ipv6CidrBlock': 'string',
'PortRange': {'From': 'integer',
'To': 'integer'},
'Protocol': 'string',
'RuleAction': 'allow '
'| '
'deny'}]}}},
'Type': {'NETWORK_ACL_COMMON'}}}}
Creates an Firewall Manager policy.
A Firewall Manager policy is specific to the individual policy type. If you want to enforce multiple policy types across accounts, you can create multiple policies. You can create more than one policy for each type.
If you add a new account to an organization that you created with Organizations, Firewall Manager automatically applies the policy to the resources in that account that are within scope of the policy.
Firewall Manager provides the following types of policies:
WAF policy - This policy applies WAF web ACL protections to specified accounts and resources.
Shield Advanced policy - This policy applies Shield Advanced protection to specified accounts and resources.
Security Groups policy - This type of policy gives you control over security groups that are in use throughout your organization in Organizations and lets you enforce a baseline set of rules across your organization.
Network ACL policy - This type of policy gives you control over the network ACLs that are in use throughout your organization in Organizations and lets you enforce a baseline set of first and last network ACL rules across your organization.
Network Firewall policy - This policy applies Network Firewall protection to your organization's VPCs.
DNS Firewall policy - This policy applies Amazon Route 53 Resolver DNS Firewall protections to your organization's VPCs.
Third-party firewall policy - This policy applies third-party firewall protections. Third-party firewalls are available by subscription through the Amazon Web Services Marketplace console at Amazon Web Services Marketplace.
Palo Alto Networks Cloud NGFW policy - This policy applies Palo Alto Networks Cloud Next Generation Firewall (NGFW) protections and Palo Alto Networks Cloud NGFW rulestacks to your organization's VPCs.
Fortigate CNF policy - This policy applies Fortigate Cloud Native Firewall (CNF) protections. Fortigate CNF is a cloud-centered solution that blocks Zero-Day threats and secures cloud infrastructures with industry-leading advanced threat prevention, smart web application firewalls (WAF), and API protection.
See also: AWS API Documentation
Request Syntax
client.put_policy(
Policy={
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyUpdateToken': 'string',
'SecurityServicePolicyData': {
'Type': 'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
'ManagedServiceData': 'string',
'PolicyOption': {
'NetworkFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'ThirdPartyFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'NetworkAclCommonPolicy': {
'NetworkAclEntrySet': {
'FirstEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForFirstEntries': True|False,
'LastEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForLastEntries': True|False
}
}
}
},
'ResourceType': 'string',
'ResourceTypeList': [
'string',
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ExcludeResourceTags': True|False,
'RemediationEnabled': True|False,
'DeleteUnusedFMManagedResources': True|False,
'IncludeMap': {
'string': [
'string',
]
},
'ExcludeMap': {
'string': [
'string',
]
},
'ResourceSetIds': [
'string',
],
'PolicyDescription': 'string',
'PolicyStatus': 'ACTIVE'|'OUT_OF_ADMIN_SCOPE'
},
TagList=[
{
'Key': 'string',
'Value': 'string'
},
]
)
dict
[REQUIRED]
The details of the Firewall Manager policy to be created.
PolicyId (string) --
The ID of the Firewall Manager policy.
PolicyName (string) -- [REQUIRED]
The name of the Firewall Manager policy.
PolicyUpdateToken (string) --
A unique identifier for each update to the policy. When issuing a PutPolicy request, the PolicyUpdateToken in the request must match the PolicyUpdateToken of the current policy version. To get the PolicyUpdateToken of the current policy version, use a GetPolicy request.
SecurityServicePolicyData (dict) -- [REQUIRED]
Details about the security service that is being used to protect the resources.
Type (string) -- [REQUIRED]
The service that the policy is using to protect the resources. This specifies the type of policy that is created, either an WAF policy, a Shield Advanced policy, or a security group policy. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting Amazon Web Services Support.
ManagedServiceData (string) --
Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: IMPORT_NETWORK_FIREWALL "{\"type\":\"IMPORT_NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:000000000000:stateless-rulegroup\/rg1\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:drop\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:pass\"],\"networkFirewallStatelessCustomActions\":[],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:aws-managed:stateful-rulegroup\/ThreatSignaturesEmergingEventsStrictOrder\",\"priority\":8}],\"networkFirewallStatefulEngineOptions\":{\"ruleOrder\":\"STRICT_ORDER\"},\"networkFirewallStatefulDefaultActions\":[\"aws:drop_strict\"]}}" "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: NETWORK_FIREWALL - Centralized deployment model "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}" To use the centralized deployment model, you must set PolicyOption to CENTRALIZED.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig. To configure the Availability Zones in firewallCreationConfig, specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: SECURITY_GROUPS_COMMON "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_COMMON - Security group tag distribution ""{\"type\":\"SECURITY_GROUPS_COMMON\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"revertManualSecurityGroupChanges\":true,\"exclusiveResourceSecurityGroupManagement\":false,\"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":false,\"enableTagDistribution\":true}"" Firewall Manager automatically distributes tags from the primary group to the security groups created by this policy. To use security group tag distribution, you must also set revertManualSecurityGroupChanges to true, otherwise Firewall Manager won't be able to create the policy. When you enable revertManualSecurityGroupChanges, Firewall Manager identifies and reports when the security groups created by this policy become non-compliant. Firewall Manager won't distribute system tags added by Amazon Web Services services into the replica security groups. System tags begin with the aws: prefix.
Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_CONTENT_AUDIT "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}" The security group action for content audit can be ALLOW or DENY. For ALLOW, all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY, all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.
Example: SECURITY_GROUPS_USAGE_AUDIT "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"
Example: SHIELD_ADVANCED with web ACL management "{\"type\":\"SHIELD_ADVANCED\",\"optimizeUnassociatedWebACL\":true}" If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager doesn't disassociate the resource from the web ACL. If you want Firewall Manager to clean up the web ACL, you must first manually disassociate the resources from the web ACL, and then enable the manage unused web ACLs option in your policy. If you set optimizeUnassociatedWebACL to false, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Specification for SHIELD_ADVANCED for Amazon CloudFront distributions "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false, \"optimizeUnassociatedWebACL\":true|false}" For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}" The default value for automaticResponseStatus is IGNORED. The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED. The default value for overrideCustomerWebaclClassic is false. For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.
Example: THIRD_PARTY_FIREWALL Replace THIRD_PARTY_FIREWALL_NAME with the name of the third-party firewall. "{ "type":"THIRD_PARTY_FIREWALL", "thirdPartyFirewall":"THIRD_PARTY_FIREWALL_NAME", "thirdPartyFirewallConfig":{ "thirdPartyFirewallPolicyList":["global-1"] }, "firewallDeploymentModel":{ "distributedFirewallDeploymentModel":{ "distributedFirewallOrchestrationConfig":{ "firewallCreationConfig":{ "endpointLocation":{ "availabilityZoneConfigList":[ { "availabilityZoneName":"${AvailabilityZone}" } ] } }, "allowedIPV4CidrList":[ ] } } } }"
Example: WAFV2 - Account takeover prevention, Bot Control managed rule groups, optimize unassociated web ACL, and rule action override "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesATPRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesATPRuleSet\":{\"loginPath\":\"/loginpath\",\"requestInspection\":{\"payloadType\":\"FORM_ENCODED|JSON\",\"usernameField\":{\"identifier\":\"/form/username\"},\"passwordField\":{\"identifier\":\"/form/password\"}}}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true},{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesBotControlRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesBotControlRuleSet\":{\"inspectionLevel\":\"TARGETED|COMMON\"}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true,\"ruleActionOverrides\":[{\"name\":\"Rule1\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}},{\"name\":\"Rule2\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"optimizeUnassociatedWebACL\":true}"
Bot Control - For information about AWSManagedRulesBotControlRuleSet managed rule groups, see AWSManagedRulesBotControlRuleSet in the WAF API Reference.
Fraud Control account takeover prevention (ATP) - For information about the properties available for AWSManagedRulesATPRuleSet managed rule groups, see AWSManagedRulesATPRuleSet in the WAF API Reference.
Optimize unassociated web ACL - If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager disassociates the resource from the web ACL, but won't clean up the unused web ACL. Firewall Manager only cleans up unused web ACLs when you first enable management of unused web ACLs in a policy. If you set optimizeUnassociatedWebACL to false Firewall Manager doesn't manage unused web ACLs, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Rule action overrides - Firewall Manager supports rule action overrides only for managed rule groups. To configure a RuleActionOverrides add the Name of the rule to override, and ActionToUse, which is the new action to use for the rule. For information about using rule action override, see RuleActionOverride in the WAF API Reference.
Example: WAFV2 - CAPTCHA and Challenge configs "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"captchaConfig\":{\"immunityTimeProperty\":{\"immunityTime\":500}},\"challengeConfig\":{\"immunityTimeProperty\":{\"immunityTime\":800}},\"tokenDomains\":[\"google.com\",\"amazon.com\"],\"associationConfig\":{\"requestBody\":{\"CLOUDFRONT\":{\"defaultSizeInspectionLimit\":\"KB_16\"}}}}"
CAPTCHA and Challenge configs - If you update the policy's values for associationConfig, captchaConfig, challengeConfig, or tokenDomains, Firewall Manager will overwrite your local web ACLs to contain the new value(s). However, if you don't update the policy's associationConfig, captchaConfig, challengeConfig, or tokenDomains values, the values in your local web ACLs will remain unchanged. For information about association configs, see AssociationConfig. For information about CAPTCHA and Challenge configs, see CaptchaConfig and ChallengeConfig in the WAF API Reference.
defaultSizeInspectionLimit - Specifies the maximum size of the web request body component that an associated Amazon CloudFront distribution should send to WAF for inspection. For more information, see DefaultSizeInspectionLimit in the WAF API Reference.
Example: WAFV2 - Firewall Manager support for WAF managed rule group versioning "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}" To use a specific version of a WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true, and set version to the version you'd like to use. If you don't set versionEnabled to true, or if you omit versionEnabled, then Firewall Manager uses the default version of the WAF managed rule group.
Example: WAFV2 - Logging configurations "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null, \"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\": {\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\", \"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"} ,\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[], \"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[], \"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\" :null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\" :false,\"loggingConfiguration\":{\"logDestinationConfigs\": [\"arn:aws:s3:::aws-waf-logs-example-bucket\"] ,\"redactedFields\":[],\"loggingFilterConfigs\":{\"defaultBehavior\":\"KEEP\", \"filters\":[{\"behavior\":\"KEEP\",\"requirement\":\"MEETS_ALL\", \"conditions\":[{\"actionCondition\":\"CAPTCHA\"},{\"actionCondition\": \"CHALLENGE\"}, {\"actionCondition\":\"EXCLUDED_AS_COUNT\"}]}]}},\"sampledRequestsEnabledForDefaultActions\":true}" Firewall Manager supports Amazon Kinesis Data Firehose and Amazon S3 as the logDestinationConfigs in your loggingConfiguration. For information about WAF logging configurations, see LoggingConfiguration in the WAF API Reference In the loggingConfiguration, you can specify one logDestinationConfigs. Optionally provide as many as 20 redactedFields. The RedactedFieldType must be one of URI, QUERY_STRING, HEADER, or METHOD.
Example: WAF Classic "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"
PolicyOption (dict) --
Contains the settings to configure a network ACL policy, a Network Firewall firewall policy deployment model, or a third-party firewall policy.
NetworkFirewallPolicy (dict) --
Defines the deployment model to use for the firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the firewall policy. To use a distributed model, set PolicyOption to NULL.
ThirdPartyFirewallPolicy (dict) --
Defines the policy options for a third-party firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the third-party firewall policy.
NetworkAclCommonPolicy (dict) --
Defines a Firewall Manager network ACL policy.
NetworkAclEntrySet (dict) -- [REQUIRED]
The definition of the first and last rules for the network ACL policy.
FirstEntries (list) --
The rules that you want to run first in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) -- [REQUIRED]
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) -- [REQUIRED]
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) -- [REQUIRED]
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForFirstEntries (boolean) -- [REQUIRED]
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
LastEntries (list) --
The rules that you want to run last in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) -- [REQUIRED]
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) -- [REQUIRED]
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) -- [REQUIRED]
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForLastEntries (boolean) -- [REQUIRED]
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
ResourceType (string) -- [REQUIRED]
The type of resource protected by or in scope of the policy. This is in the format shown in the Amazon Web Services Resource Types Reference. To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList.
The following are valid resource types for each Firewall Manager policy type:
Amazon Web Services WAF Classic - AWS::ApiGateway::Stage, AWS::CloudFront::Distribution, and AWS::ElasticLoadBalancingV2::LoadBalancer.
WAF - AWS::ApiGateway::Stage, AWS::ElasticLoadBalancingV2::LoadBalancer, and AWS::CloudFront::Distribution.
Shield Advanced - AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::ElasticLoadBalancing::LoadBalancer, AWS::EC2::EIP, and AWS::CloudFront::Distribution.
Network ACL - AWS::EC2::Subnet.
Security group usage audit - AWS::EC2::SecurityGroup.
Security group content audit - AWS::EC2::SecurityGroup, AWS::EC2::NetworkInterface, and AWS::EC2::Instance.
DNS Firewall, Network Firewall, and third-party firewall - AWS::EC2::VPC.
ResourceTypeList (list) --
An array of ResourceType objects. Use this only to specify multiple resource types. To specify a single resource type, use ResourceType.
(string) --
ResourceTags (list) --
An array of ResourceTag objects.
(dict) --
The resource tags that Firewall Manager uses to determine if a particular resource should be included or excluded from the Firewall Manager policy. Tags enable you to categorize your Amazon Web Services resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value. Firewall Manager combines the tags with "AND" so that, if you add more than one tag to a policy scope, a resource must have all the specified tags to be included or excluded. For more information, see Working with Tag Editor.
Key (string) -- [REQUIRED]
The resource tag key.
Value (string) --
The resource tag value.
ExcludeResourceTags (boolean) -- [REQUIRED]
If set to True, resources with the tags that are specified in the ResourceTag array are not in scope of the policy. If set to False, and the ResourceTag array is not null, only resources with the specified tags are in scope of the policy.
RemediationEnabled (boolean) -- [REQUIRED]
Indicates if the policy should be automatically applied to new resources.
DeleteUnusedFMManagedResources (boolean) --
Indicates whether Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope. For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.
By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.
This option is not available for Shield Advanced or WAF Classic policies.
IncludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to include in the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ExcludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to exclude from the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ResourceSetIds (list) --
The unique identifiers of the resource sets used by the policy.
(string) --
PolicyDescription (string) --
The definition of the Network Firewall firewall policy.
PolicyStatus (string) --
Indicates whether the policy is in or out of an admin's policy or Region scope.
ACTIVE - The administrator can manage and delete the policy.
OUT_OF_ADMIN_SCOPE - The administrator can view the policy, but they can't edit or delete the policy. Existing policy protections stay in place. Any new resources that come into scope of the policy won't be protected.
list
The tags to add to the Amazon Web Services resource.
(dict) --
A collection of key:value pairs associated with an Amazon Web Services resource. The key:value pair can be anything you define. Typically, the tag key represents a category (such as "environment") and the tag value represents a specific value within that category (such as "test," "development," or "production"). You can add up to 50 tags to each Amazon Web Services resource.
Key (string) -- [REQUIRED]
Part of the key:value pair that defines a tag. You can use a tag key to describe a category of information, such as "customer." Tag keys are case-sensitive.
Value (string) -- [REQUIRED]
Part of the key:value pair that defines a tag. You can use a tag value to describe a specific value within a category, such as "companyA" or "companyB." Tag values are case-sensitive.
dict
Response Syntax
{
'Policy': {
'PolicyId': 'string',
'PolicyName': 'string',
'PolicyUpdateToken': 'string',
'SecurityServicePolicyData': {
'Type': 'WAF'|'WAFV2'|'SHIELD_ADVANCED'|'SECURITY_GROUPS_COMMON'|'SECURITY_GROUPS_CONTENT_AUDIT'|'SECURITY_GROUPS_USAGE_AUDIT'|'NETWORK_FIREWALL'|'DNS_FIREWALL'|'THIRD_PARTY_FIREWALL'|'IMPORT_NETWORK_FIREWALL'|'NETWORK_ACL_COMMON',
'ManagedServiceData': 'string',
'PolicyOption': {
'NetworkFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'ThirdPartyFirewallPolicy': {
'FirewallDeploymentModel': 'CENTRALIZED'|'DISTRIBUTED'
},
'NetworkAclCommonPolicy': {
'NetworkAclEntrySet': {
'FirstEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForFirstEntries': True|False,
'LastEntries': [
{
'IcmpTypeCode': {
'Code': 123,
'Type': 123
},
'Protocol': 'string',
'PortRange': {
'From': 123,
'To': 123
},
'CidrBlock': 'string',
'Ipv6CidrBlock': 'string',
'RuleAction': 'allow'|'deny',
'Egress': True|False
},
],
'ForceRemediateForLastEntries': True|False
}
}
}
},
'ResourceType': 'string',
'ResourceTypeList': [
'string',
],
'ResourceTags': [
{
'Key': 'string',
'Value': 'string'
},
],
'ExcludeResourceTags': True|False,
'RemediationEnabled': True|False,
'DeleteUnusedFMManagedResources': True|False,
'IncludeMap': {
'string': [
'string',
]
},
'ExcludeMap': {
'string': [
'string',
]
},
'ResourceSetIds': [
'string',
],
'PolicyDescription': 'string',
'PolicyStatus': 'ACTIVE'|'OUT_OF_ADMIN_SCOPE'
},
'PolicyArn': 'string'
}
Response Structure
(dict) --
Policy (dict) --
The details of the Firewall Manager policy.
PolicyId (string) --
The ID of the Firewall Manager policy.
PolicyName (string) --
The name of the Firewall Manager policy.
PolicyUpdateToken (string) --
A unique identifier for each update to the policy. When issuing a PutPolicy request, the PolicyUpdateToken in the request must match the PolicyUpdateToken of the current policy version. To get the PolicyUpdateToken of the current policy version, use a GetPolicy request.
SecurityServicePolicyData (dict) --
Details about the security service that is being used to protect the resources.
Type (string) --
The service that the policy is using to protect the resources. This specifies the type of policy that is created, either an WAF policy, a Shield Advanced policy, or a security group policy. For security group policies, Firewall Manager supports one security group for each common policy and for each content audit policy. This is an adjustable limit that you can increase by contacting Amazon Web Services Support.
ManagedServiceData (string) --
Details about the service that are specific to the service type, in JSON format.
Example: DNS_FIREWALL "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: IMPORT_NETWORK_FIREWALL "{\"type\":\"IMPORT_NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:000000000000:stateless-rulegroup\/rg1\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:drop\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:pass\"],\"networkFirewallStatelessCustomActions\":[],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-west-2:aws-managed:stateful-rulegroup\/ThreatSignaturesEmergingEventsStrictOrder\",\"priority\":8}],\"networkFirewallStatefulEngineOptions\":{\"ruleOrder\":\"STRICT_ORDER\"},\"networkFirewallStatefulDefaultActions\":[\"aws:drop_strict\"]}}" "{\"type\":\"DNS_FIREWALL\",\"preProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-1\",\"priority\":10}],\"postProcessRuleGroups\":[{\"ruleGroupId\":\"rslvr-frg-2\",\"priority\":9911}]}"
Example: NETWORK_FIREWALL - Centralized deployment model "{\"type\":\"NETWORK_FIREWALL\",\"awsNetworkFirewallConfig\":{\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}},\"firewallDeploymentModel\":{\"centralizedFirewallDeploymentModel\":{\"centralizedFirewallOrchestrationConfig\":{\"inspectionVpcIds\":[{\"resourceId\":\"vpc-1234\",\"accountId\":\"123456789011\"}],\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneId\":null,\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"allowedIPV4CidrList\":[]}}}}" To use the centralized deployment model, you must set PolicyOption to CENTRALIZED.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"OFF\"},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" With automatic Availbility Zone configuration, Firewall Manager chooses which Availability Zones to create the endpoints in. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with automatic Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":[\"10.0.0.0/28\",\"192.168.0.0/28\"],\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"]},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\": \"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":true}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\", \"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{ \"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[ \"10.0.0.0/28\"]}]} },\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"OFF\",\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" With custom Availability Zone configuration, you define which specific Availability Zones to create endpoints in by configuring firewallCreationConfig. To configure the Availability Zones in firewallCreationConfig, specify either the availabilityZoneName or availabilityZoneId parameter, not both parameters. To use the distributed deployment model, you must set PolicyOption to NULL.
Example: NETWORK_FIREWALL - Distributed deployment model with custom Availability Zone configuration and route management "{\"type\":\"NETWORK_FIREWALL\",\"networkFirewallStatelessRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateless-rulegroup/test\",\"priority\":1}],\"networkFirewallStatelessDefaultActions\":[\"aws:forward_to_sfe\",\"customActionName\"],\"networkFirewallStatelessFragmentDefaultActions\":[\"aws:forward_to_sfe\",\"fragmentcustomactionname\"],\"networkFirewallStatelessCustomActions\":[{\"actionName\":\"customActionName\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"metricdimensionvalue\"}]}}},{\"actionName\":\"fragmentcustomactionname\",\"actionDefinition\":{\"publishMetricAction\":{\"dimensions\":[{\"value\":\"fragmentmetricdimensionvalue\"}]}}}],\"networkFirewallStatefulRuleGroupReferences\":[{\"resourceARN\":\"arn:aws:network-firewall:us-east-1:123456789011:stateful-rulegroup/test\"}],\"networkFirewallOrchestrationConfig\":{\"firewallCreationConfig\":{\"endpointLocation\":{\"availabilityZoneConfigList\":[{\"availabilityZoneName\":\"us-east-1a\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]},{\"availabilityZoneName\":\"us-east-1b\",\"allowedIPV4CidrList\":[\"10.0.0.0/28\"]}]}},\"singleFirewallEndpointPerVPC\":false,\"allowedIPV4CidrList\":null,\"routeManagementAction\":\"MONITOR\",\"routeManagementTargetTypes\":[\"InternetGateway\"],\"routeManagementConfig\":{\"allowCrossAZTrafficIfNoEndpoint\":true}},\"networkFirewallLoggingConfiguration\":{\"logDestinationConfigs\":[{\"logDestinationType\":\"S3\",\"logType\":\"ALERT\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}},{\"logDestinationType\":\"S3\",\"logType\":\"FLOW\",\"logDestination\":{\"bucketName\":\"s3-bucket-name\"}}],\"overrideExistingConfig\":boolean}}" To use the distributed deployment model, you must set PolicyOption to NULL.
Example: SECURITY_GROUPS_COMMON "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_COMMON - Security group tag distribution ""{\"type\":\"SECURITY_GROUPS_COMMON\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"revertManualSecurityGroupChanges\":true,\"exclusiveResourceSecurityGroupManagement\":false,\"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":false,\"enableTagDistribution\":true}"" Firewall Manager automatically distributes tags from the primary group to the security groups created by this policy. To use security group tag distribution, you must also set revertManualSecurityGroupChanges to true, otherwise Firewall Manager won't be able to create the policy. When you enable revertManualSecurityGroupChanges, Firewall Manager identifies and reports when the security groups created by this policy become non-compliant. Firewall Manager won't distribute system tags added by Amazon Web Services services into the replica security groups. System tags begin with the aws: prefix.
Example: Shared VPCs. Apply the preceding policy to resources in shared VPCs as well as to those in VPCs that the account owns "{\"type\":\"SECURITY_GROUPS_COMMON\",\"revertManualSecurityGroupChanges\":false,\"exclusiveResourceSecurityGroupManagement\":false, \"applyToAllEC2InstanceENIs\":false,\"includeSharedVPC\":true,\"securityGroups\":[{\"id\":\" sg-000e55995d61a06bd\"}]}"
Example: SECURITY_GROUPS_CONTENT_AUDIT "{\"type\":\"SECURITY_GROUPS_CONTENT_AUDIT\",\"securityGroups\":[{\"id\":\"sg-000e55995d61a06bd\"}],\"securityGroupAction\":{\"type\":\"ALLOW\"}}" The security group action for content audit can be ALLOW or DENY. For ALLOW, all in-scope security group rules must be within the allowed range of the policy's security group rules. For DENY, all in-scope security group rules must not contain a value or a range that matches a rule value or range in the policy security group.
Example: SECURITY_GROUPS_USAGE_AUDIT "{\"type\":\"SECURITY_GROUPS_USAGE_AUDIT\",\"deleteUnusedSecurityGroups\":true,\"coalesceRedundantSecurityGroups\":true}"
Example: SHIELD_ADVANCED with web ACL management "{\"type\":\"SHIELD_ADVANCED\",\"optimizeUnassociatedWebACL\":true}" If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager doesn't disassociate the resource from the web ACL. If you want Firewall Manager to clean up the web ACL, you must first manually disassociate the resources from the web ACL, and then enable the manage unused web ACLs option in your policy. If you set optimizeUnassociatedWebACL to false, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Specification for SHIELD_ADVANCED for Amazon CloudFront distributions "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED|IGNORED|DISABLED\", \"automaticResponseAction\":\"BLOCK|COUNT\"}, \"overrideCustomerWebaclClassic\":true|false, \"optimizeUnassociatedWebACL\":true|false}" For example: "{\"type\":\"SHIELD_ADVANCED\",\"automaticResponseConfiguration\": {\"automaticResponseStatus\":\"ENABLED\", \"automaticResponseAction\":\"COUNT\"}}" The default value for automaticResponseStatus is IGNORED. The value for automaticResponseAction is only required when automaticResponseStatus is set to ENABLED. The default value for overrideCustomerWebaclClassic is false. For other resource types that you can protect with a Shield Advanced policy, this ManagedServiceData configuration is an empty string.
Example: THIRD_PARTY_FIREWALL Replace THIRD_PARTY_FIREWALL_NAME with the name of the third-party firewall. "{ "type":"THIRD_PARTY_FIREWALL", "thirdPartyFirewall":"THIRD_PARTY_FIREWALL_NAME", "thirdPartyFirewallConfig":{ "thirdPartyFirewallPolicyList":["global-1"] }, "firewallDeploymentModel":{ "distributedFirewallDeploymentModel":{ "distributedFirewallOrchestrationConfig":{ "firewallCreationConfig":{ "endpointLocation":{ "availabilityZoneConfigList":[ { "availabilityZoneName":"${AvailabilityZone}" } ] } }, "allowedIPV4CidrList":[ ] } } } }"
Example: WAFV2 - Account takeover prevention, Bot Control managed rule groups, optimize unassociated web ACL, and rule action override "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesATPRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesATPRuleSet\":{\"loginPath\":\"/loginpath\",\"requestInspection\":{\"payloadType\":\"FORM_ENCODED|JSON\",\"usernameField\":{\"identifier\":\"/form/username\"},\"passwordField\":{\"identifier\":\"/form/password\"}}}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true},{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesBotControlRuleSet\",\"managedRuleGroupConfigs\":[{\"awsmanagedRulesBotControlRuleSet\":{\"inspectionLevel\":\"TARGETED|COMMON\"}}]},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true,\"ruleActionOverrides\":[{\"name\":\"Rule1\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}},{\"name\":\"Rule2\",\"actionToUse\":{\"allow|block|count|captcha|challenge\":{}}}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"optimizeUnassociatedWebACL\":true}"
Bot Control - For information about AWSManagedRulesBotControlRuleSet managed rule groups, see AWSManagedRulesBotControlRuleSet in the WAF API Reference.
Fraud Control account takeover prevention (ATP) - For information about the properties available for AWSManagedRulesATPRuleSet managed rule groups, see AWSManagedRulesATPRuleSet in the WAF API Reference.
Optimize unassociated web ACL - If you set optimizeUnassociatedWebACL to true, Firewall Manager creates web ACLs in accounts within the policy scope if the web ACLs will be used by at least one resource. Firewall Manager creates web ACLs in the accounts within policy scope only if the web ACLs will be used by at least one resource. If at any time an account comes into policy scope, Firewall Manager automatically creates a web ACL in the account if at least one resource will use the web ACL. Upon enablement, Firewall Manager performs a one-time cleanup of unused web ACLs in your account. The cleanup process can take several hours. If a resource leaves policy scope after Firewall Manager creates a web ACL, Firewall Manager disassociates the resource from the web ACL, but won't clean up the unused web ACL. Firewall Manager only cleans up unused web ACLs when you first enable management of unused web ACLs in a policy. If you set optimizeUnassociatedWebACL to false Firewall Manager doesn't manage unused web ACLs, and Firewall Manager automatically creates an empty web ACL in each account that's within policy scope.
Rule action overrides - Firewall Manager supports rule action overrides only for managed rule groups. To configure a RuleActionOverrides add the Name of the rule to override, and ActionToUse, which is the new action to use for the rule. For information about using rule action override, see RuleActionOverride in the WAF API Reference.
Example: WAFV2 - CAPTCHA and Challenge configs "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[],\"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\":null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":null,\"sampledRequestsEnabledForDefaultActions\":true,\"captchaConfig\":{\"immunityTimeProperty\":{\"immunityTime\":500}},\"challengeConfig\":{\"immunityTimeProperty\":{\"immunityTime\":800}},\"tokenDomains\":[\"google.com\",\"amazon.com\"],\"associationConfig\":{\"requestBody\":{\"CLOUDFRONT\":{\"defaultSizeInspectionLimit\":\"KB_16\"}}}}"
CAPTCHA and Challenge configs - If you update the policy's values for associationConfig, captchaConfig, challengeConfig, or tokenDomains, Firewall Manager will overwrite your local web ACLs to contain the new value(s). However, if you don't update the policy's associationConfig, captchaConfig, challengeConfig, or tokenDomains values, the values in your local web ACLs will remain unchanged. For information about association configs, see AssociationConfig. For information about CAPTCHA and Challenge configs, see CaptchaConfig and ChallengeConfig in the WAF API Reference.
defaultSizeInspectionLimit - Specifies the maximum size of the web request body component that an associated Amazon CloudFront distribution should send to WAF for inspection. For more information, see DefaultSizeInspectionLimit in the WAF API Reference.
Example: WAFV2 - Firewall Manager support for WAF managed rule group versioning "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null,\"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\":{\"versionEnabled\":true,\"version\":\"Version_2.0\",\"vendorName\":\"AWS\",\"managedRuleGroupName\":\"AWSManagedRulesCommonRuleSet\"},\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[{\"name\":\"NoUserAgent_HEADER\"}]}],\"postProcessRuleGroups\":[],\"defaultAction\":{\"type\":\"ALLOW\"},\"overrideCustomerWebACLAssociation\":false,\"loggingConfiguration\":{\"logDestinationConfigs\":[\"arn:aws:firehose:us-west-2:12345678912:deliverystream/aws-waf-logs-fms-admin-destination\"],\"redactedFields\":[{\"redactedFieldType\":\"SingleHeader\",\"redactedFieldValue\":\"Cookies\"},{\"redactedFieldType\":\"Method\"}]}}" To use a specific version of a WAF managed rule group in your Firewall Manager policy, you must set versionEnabled to true, and set version to the version you'd like to use. If you don't set versionEnabled to true, or if you omit versionEnabled, then Firewall Manager uses the default version of the WAF managed rule group.
Example: WAFV2 - Logging configurations "{\"type\":\"WAFV2\",\"preProcessRuleGroups\":[{\"ruleGroupArn\":null, \"overrideAction\":{\"type\":\"NONE\"},\"managedRuleGroupIdentifier\": {\"versionEnabled\":null,\"version\":null,\"vendorName\":\"AWS\", \"managedRuleGroupName\":\"AWSManagedRulesAdminProtectionRuleSet\"} ,\"ruleGroupType\":\"ManagedRuleGroup\",\"excludeRules\":[], \"sampledRequestsEnabled\":true}],\"postProcessRuleGroups\":[], \"defaultAction\":{\"type\":\"ALLOW\"},\"customRequestHandling\" :null,\"customResponse\":null,\"overrideCustomerWebACLAssociation\" :false,\"loggingConfiguration\":{\"logDestinationConfigs\": [\"arn:aws:s3:::aws-waf-logs-example-bucket\"] ,\"redactedFields\":[],\"loggingFilterConfigs\":{\"defaultBehavior\":\"KEEP\", \"filters\":[{\"behavior\":\"KEEP\",\"requirement\":\"MEETS_ALL\", \"conditions\":[{\"actionCondition\":\"CAPTCHA\"},{\"actionCondition\": \"CHALLENGE\"}, {\"actionCondition\":\"EXCLUDED_AS_COUNT\"}]}]}},\"sampledRequestsEnabledForDefaultActions\":true}" Firewall Manager supports Amazon Kinesis Data Firehose and Amazon S3 as the logDestinationConfigs in your loggingConfiguration. For information about WAF logging configurations, see LoggingConfiguration in the WAF API Reference In the loggingConfiguration, you can specify one logDestinationConfigs. Optionally provide as many as 20 redactedFields. The RedactedFieldType must be one of URI, QUERY_STRING, HEADER, or METHOD.
Example: WAF Classic "{\"type\": \"WAF\", \"ruleGroups\": [{\"id\":\"12345678-1bcd-9012-efga-0987654321ab\", \"overrideAction\" : {\"type\": \"COUNT\"}}], \"defaultAction\": {\"type\": \"BLOCK\"}}"
PolicyOption (dict) --
Contains the settings to configure a network ACL policy, a Network Firewall firewall policy deployment model, or a third-party firewall policy.
NetworkFirewallPolicy (dict) --
Defines the deployment model to use for the firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the firewall policy. To use a distributed model, set PolicyOption to NULL.
ThirdPartyFirewallPolicy (dict) --
Defines the policy options for a third-party firewall policy.
FirewallDeploymentModel (string) --
Defines the deployment model to use for the third-party firewall policy.
NetworkAclCommonPolicy (dict) --
Defines a Firewall Manager network ACL policy.
NetworkAclEntrySet (dict) --
The definition of the first and last rules for the network ACL policy.
FirstEntries (list) --
The rules that you want to run first in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForFirstEntries (boolean) --
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
LastEntries (list) --
The rules that you want to run last in the Firewall Manager managed network ACLs.
(dict) --
Describes a rule in a network ACL.
Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the network ACL, Amazon Web Services processes the entries in the network ACL according to the rule numbers, in ascending order.
When you manage an individual network ACL, you explicitly specify the rule numbers. When you specify the network ACL rules in a Firewall Manager policy, you provide the rules to run first, in the order that you want them to run, and the rules to run last, in the order that you want them to run. Firewall Manager assigns the rule numbers for you when you save the network ACL policy specification.
IcmpTypeCode (dict) --
ICMP protocol: The ICMP type and code.
Code (integer) --
ICMP code.
Type (integer) --
ICMP type.
Protocol (string) --
The protocol number. A value of "-1" means all protocols.
PortRange (dict) --
TCP or UDP protocols: The range of ports the rule applies to.
From (integer) --
The beginning port number of the range.
To (integer) --
The ending port number of the range.
CidrBlock (string) --
The IPv4 network range to allow or deny, in CIDR notation.
Ipv6CidrBlock (string) --
The IPv6 network range to allow or deny, in CIDR notation.
RuleAction (string) --
Indicates whether to allow or deny the traffic that matches the rule.
Egress (boolean) --
Indicates whether the rule is an egress, or outbound, rule (applied to traffic leaving the subnet). If it's not an egress rule, then it's an ingress, or inbound, rule.
ForceRemediateForLastEntries (boolean) --
Applies only when remediation is enabled for the policy as a whole. Firewall Manager uses this setting when it finds policy violations that involve conflicts between the custom entries and the policy entries.
If forced remediation is disabled, Firewall Manager marks the network ACL as noncompliant and does not try to remediate. For more information about the remediation behavior, see Network access control list (ACL) policies in the Firewall Manager Developer Guide.
ResourceType (string) --
The type of resource protected by or in scope of the policy. This is in the format shown in the Amazon Web Services Resource Types Reference. To apply this policy to multiple resource types, specify a resource type of ResourceTypeList and then specify the resource types in a ResourceTypeList.
The following are valid resource types for each Firewall Manager policy type:
Amazon Web Services WAF Classic - AWS::ApiGateway::Stage, AWS::CloudFront::Distribution, and AWS::ElasticLoadBalancingV2::LoadBalancer.
WAF - AWS::ApiGateway::Stage, AWS::ElasticLoadBalancingV2::LoadBalancer, and AWS::CloudFront::Distribution.
Shield Advanced - AWS::ElasticLoadBalancingV2::LoadBalancer, AWS::ElasticLoadBalancing::LoadBalancer, AWS::EC2::EIP, and AWS::CloudFront::Distribution.
Network ACL - AWS::EC2::Subnet.
Security group usage audit - AWS::EC2::SecurityGroup.
Security group content audit - AWS::EC2::SecurityGroup, AWS::EC2::NetworkInterface, and AWS::EC2::Instance.
DNS Firewall, Network Firewall, and third-party firewall - AWS::EC2::VPC.
ResourceTypeList (list) --
An array of ResourceType objects. Use this only to specify multiple resource types. To specify a single resource type, use ResourceType.
(string) --
ResourceTags (list) --
An array of ResourceTag objects.
(dict) --
The resource tags that Firewall Manager uses to determine if a particular resource should be included or excluded from the Firewall Manager policy. Tags enable you to categorize your Amazon Web Services resources in different ways, for example, by purpose, owner, or environment. Each tag consists of a key and an optional value. Firewall Manager combines the tags with "AND" so that, if you add more than one tag to a policy scope, a resource must have all the specified tags to be included or excluded. For more information, see Working with Tag Editor.
Key (string) --
The resource tag key.
Value (string) --
The resource tag value.
ExcludeResourceTags (boolean) --
If set to True, resources with the tags that are specified in the ResourceTag array are not in scope of the policy. If set to False, and the ResourceTag array is not null, only resources with the specified tags are in scope of the policy.
RemediationEnabled (boolean) --
Indicates if the policy should be automatically applied to new resources.
DeleteUnusedFMManagedResources (boolean) --
Indicates whether Firewall Manager should automatically remove protections from resources that leave the policy scope and clean up resources that Firewall Manager is managing for accounts when those accounts leave policy scope. For example, Firewall Manager will disassociate a Firewall Manager managed web ACL from a protected customer resource when the customer resource leaves policy scope.
By default, Firewall Manager doesn't remove protections or delete Firewall Manager managed resources.
This option is not available for Shield Advanced or WAF Classic policies.
IncludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to include in the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ExcludeMap (dict) --
Specifies the Amazon Web Services account IDs and Organizations organizational units (OUs) to exclude from the policy. Specifying an OU is the equivalent of specifying all accounts in the OU and in any of its child OUs, including any child OUs and accounts that are added at a later time.
You can specify inclusions or exclusions, but not both. If you specify an IncludeMap, Firewall Manager applies the policy to all accounts specified by the IncludeMap, and does not evaluate any ExcludeMap specifications. If you do not specify an IncludeMap, then Firewall Manager applies the policy to all accounts except for those specified by the ExcludeMap.
You can specify account IDs, OUs, or a combination:
Specify account IDs by setting the key to ACCOUNT. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”]}.
Specify OUs by setting the key to ORG_UNIT. For example, the following is a valid map: {“ORG_UNIT” : [“ouid111”, “ouid112”]}.
Specify accounts and OUs together in a single map, separated with a comma. For example, the following is a valid map: {“ACCOUNT” : [“accountID1”, “accountID2”], “ORG_UNIT” : [“ouid111”, “ouid112”]}.
(string) --
(list) --
(string) --
ResourceSetIds (list) --
The unique identifiers of the resource sets used by the policy.
(string) --
PolicyDescription (string) --
The definition of the Network Firewall firewall policy.
PolicyStatus (string) --
Indicates whether the policy is in or out of an admin's policy or Region scope.
ACTIVE - The administrator can manage and delete the policy.
OUT_OF_ADMIN_SCOPE - The administrator can view the policy, but they can't edit or delete the policy. Existing policy protections stay in place. Any new resources that come into scope of the policy won't be protected.
PolicyArn (string) --
The Amazon Resource Name (ARN) of the policy.