2019/07/11 - Amazon EventBridge - 13 new14 updated api methods
Changes Update events client to latest version
Deletes the specified custom event bus or partner event bus. All rules associated with this event bus are also deleted. You can't delete your account's default event bus.
See also: AWS API Documentation
Request Syntax
client.delete_event_bus(
Name='string'
)
string
[REQUIRED]
The name of the event bus to delete.
None
An AWS customer uses this operation to temporarily stop receiving events from the specified partner event source. The matching event bus isn't deleted.
When you deactivate a partner event source, the source goes into PENDING state. If it remains in PENDING state for more than two weeks, it's deleted.
To activate a deactivated partner event source, use ActivateEventSource.
See also: AWS API Documentation
Request Syntax
client.deactivate_event_source(
Name='string'
)
string
[REQUIRED]
The name of the partner event source to deactivate.
None
Creates a new event bus within your account. This can be a custom event bus which you can use to receive events from your own custom applications and services, or it can be a partner event bus which can be matched to a partner event source.
See also: AWS API Documentation
Request Syntax
client.create_event_bus(
Name='string',
EventSourceName='string'
)
string
[REQUIRED]
The name of the new event bus.
The names of custom event buses can't contain the / character. You can't use the name default for a custom event bus because this name is already used for your account's default event bus.
If this is a partner event bus, the name must exactly match the name of the partner event source that this event bus is matched to. This name will include the / character.
string
If you're creating a partner event bus, this specifies the partner event source that the new event bus will be matched with.
dict
Response Syntax
{
'EventBusArn': 'string'
}
Response Structure
(dict) --
EventBusArn (string) --
The ARN of the new event bus.
This operation lists details about a partner event source that is shared with your account.
See also: AWS API Documentation
Request Syntax
client.describe_event_source(
Name='string'
)
string
[REQUIRED]
The name of the partner event source to display the details of.
dict
Response Syntax
{
'Arn': 'string',
'CreatedBy': 'string',
'CreationTime': datetime(2015, 1, 1),
'ExpirationTime': datetime(2015, 1, 1),
'Name': 'string',
'State': 'PENDING'|'ACTIVE'|'DELETED'
}
Response Structure
(dict) --
Arn (string) --
The ARN of the partner event source.
CreatedBy (string) --
The name of the SaaS partner that created the event source.
CreationTime (datetime) --
The date and time that the event source was created.
ExpirationTime (datetime) --
The date and time that the event source will expire if you don't create a matching event bus.
Name (string) --
The name of the partner event source.
State (string) --
The state of the event source. If it's ACTIVE, you have already created a matching event bus for this event source, and that event bus is active. If it's PENDING, either you haven't yet created a matching event bus, or that event bus is deactivated. If it's DELETED, you have created a matching event bus, but the event source has since been deleted.
An SaaS partner can use this operation to list all the partner event source names that they have created.
See also: AWS API Documentation
Request Syntax
client.list_partner_event_sources(
NamePrefix='string',
NextToken='string',
Limit=123
)
string
[REQUIRED]
If you specify this, the results are limited to only those partner event sources that start with the string you specify.
string
The token returned by a previous call to this operation. Specifying this retrieves the next set of results.
integer
pecifying this limits the number of results returned by this operation. The operation also returns a NextToken that you can use in a subsequent operation to retrieve the next set of results.
dict
Response Syntax
{
'PartnerEventSources': [
{
'Arn': 'string',
'Name': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
PartnerEventSources (list) --
The list of partner event sources returned by the operation.
(dict) --
A partner event source is created by an SaaS partner. If a customer creates a partner event bus that matches this event source, that AWS account can receive events from the partner's applications or services.
Arn (string) --
The ARN of the partner event source.
Name (string) --
The name of the partner event source.
NextToken (string) --
A token you can use in a subsequent operation to retrieve the next set of results.
An SaaS partner can use this operation to display the AWS account ID that a particular partner event source name is associated with.
See also: AWS API Documentation
Request Syntax
client.list_partner_event_source_accounts(
EventSourceName='string',
NextToken='string',
Limit=123
)
string
[REQUIRED]
The name of the partner event source to display account information about.
string
The token returned by a previous call to this operation. Specifying this retrieves the next set of results.
integer
Specifying this limits the number of results returned by this operation. The operation also returns a NextToken that you can use in a subsequent operation to retrieve the next set of results.
dict
Response Syntax
{
'PartnerEventSourceAccounts': [
{
'Account': 'string',
'CreationTime': datetime(2015, 1, 1),
'ExpirationTime': datetime(2015, 1, 1),
'State': 'PENDING'|'ACTIVE'|'DELETED'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
PartnerEventSourceAccounts (list) --
The list of partner event sources returned by the operation.
(dict) --
The AWS account that a partner event source has been offered to.
Account (string) --
The AWS account ID that the partner event source was offered to.
CreationTime (datetime) --
The date and time when the event source was created.
ExpirationTime (datetime) --
The date and time when the event source will expire if the AWS account doesn't create a matching event bus for it.
State (string) --
The state of the event source. If it's ACTIVE, you have already created a matching event bus for this event source, and that event bus is active. If it's PENDING, either you haven't yet created a matching event bus, or that event bus is deactivated. If it's DELETED, you have created a matching event bus, but the event source has since been deleted.
NextToken (string) --
A token you can use in a subsequent operation to retrieve the next set of results.
You can use this to see all the partner event sources that have been shared with your AWS account. For more information about partner event sources, see CreateEventBus.
See also: AWS API Documentation
Request Syntax
client.list_event_sources(
NamePrefix='string',
NextToken='string',
Limit=123
)
string
Specifying this limits the results to only those partner event sources with names that start with the specified prefix.
string
The token returned by a previous call to retrieve the next set of results.
integer
Specifying this limits the number of results returned by this operation. The operation also returns a NextToken that you can use in a subsequent operation to retrieve the next set of results.
dict
Response Syntax
{
'EventSources': [
{
'Arn': 'string',
'CreatedBy': 'string',
'CreationTime': datetime(2015, 1, 1),
'ExpirationTime': datetime(2015, 1, 1),
'Name': 'string',
'State': 'PENDING'|'ACTIVE'|'DELETED'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
EventSources (list) --
The list of event sources.
(dict) --
A partner event source is created by an SaaS partner. If a customer creates a partner event bus that matches this event source, that AWS account can receive events from the partner's applications or services.
Arn (string) --
The ARN of the event source.
CreatedBy (string) --
The name of the partner that created the event source.
CreationTime (datetime) --
The date and time when the event source was created.
ExpirationTime (datetime) --
The date and time when the event source will expire if the AWS account doesn't create a matching event bus for it.
Name (string) --
The name of the event source.
State (string) --
The state of the event source. If it's ACTIVE, you have already created a matching event bus for this event source, and that event bus is active. If it's PENDING, either you haven't yet created a matching event bus, or that event bus is deactivated. If it's DELETED, you have created a matching event bus, but the event source has since been deleted.
NextToken (string) --
A token you can use in a subsequent operation to retrieve the next set of results.
Lists all the event buses in your account, including the default event bus, custom event buses, and partner event buses.
See also: AWS API Documentation
Request Syntax
client.list_event_buses(
NamePrefix='string',
NextToken='string',
Limit=123
)
string
Specifying this limits the results to only those event buses with names that start with the specified prefix.
string
The token returned by a previous call to retrieve the next set of results.
integer
Specifying this limits the number of results returned by this operation. The operation also returns a NextToken that you can use in a subsequent operation to retrieve the next set of results.
dict
Response Syntax
{
'EventBuses': [
{
'Name': 'string',
'Arn': 'string',
'Policy': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
EventBuses (list) --
This list of event buses.
(dict) --
An event bus receives events from a source and routes them to rules associated with that event bus. Your account's default event bus receives rules from AWS services. A custom event bus can receive rules from AWS services as well as your custom applications and services. A partner event bus receives events from an event source created by an SaaS partner. These events come from the partners services or applications.
Name (string) --
The name of the event bus.
Arn (string) --
The ARN of the event bus.
Policy (string) --
The permissions policy of the event bus, describing which other AWS accounts can write events to this event bus.
NextToken (string) --
A token you can use in a subsequent operation to retrieve the next set of results.
This is used by SaaS partners to write events to a customer's partner event bus.
See also: AWS API Documentation
Request Syntax
client.put_partner_events(
Entries=[
{
'Time': datetime(2015, 1, 1),
'Source': 'string',
'Resources': [
'string',
],
'DetailType': 'string',
'Detail': 'string'
},
]
)
list
[REQUIRED]
The list of events to write to the event bus.
(dict) --
The details about an event generated by an SaaS partner.
Time (datetime) --
The date and time of the event.
Source (string) --
The event source that is generating the evntry.
Resources (list) --
AWS resources, identified by Amazon Resource Name (ARN), that the event primarily concerns. Any number, including zero, can be present.
(string) --
DetailType (string) --
A free-form string used to decide which fields to expect in the event detail.
Detail (string) --
A valid JSON string. There is no other schema imposed. The JSON string can contain fields and nested subobjects.
dict
Response Syntax
{
'FailedEntryCount': 123,
'Entries': [
{
'EventId': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
FailedEntryCount (integer) --
The number of events from this operation that couldn't be written to the partner event bus.
Entries (list) --
The list of events from this operation that were successfully written to the partner event bus.
(dict) --
Represents an event that a partner tried to generate but failed.
EventId (string) --
The ID of the event.
ErrorCode (string) --
The error code that indicates why the event submission failed.
ErrorMessage (string) --
The error message that explains why the event submission failed.
An SaaS partner can use this operation to list details about a partner event source that they have created.
See also: AWS API Documentation
Request Syntax
client.describe_partner_event_source(
Name='string'
)
string
[REQUIRED]
The name of the event source to display.
dict
Response Syntax
{
'Arn': 'string',
'Name': 'string'
}
Response Structure
(dict) --
Arn (string) --
The ARN of the event source.
Name (string) --
The name of the event source.
Called by an SaaS partner to create a partner event source.
Each partner event source can be used by one AWS account to create a matching partner event bus in that AWS account. A SaaS partner must create one partner event source for each AWS account that wants to receive those event types.
A partner event source creates events based on resources in the SaaS partner's service or application.
An AWS account that creates a partner event bus that matches the partner event source can use that event bus to receive events from the partner, and then process them using AWS Events rules and targets.
Partner event source names follow this format:
aws.partner/partner_name/event_namespace/event_name
partner_name is determined during partner registration and identifies the partner to AWS customers.
For event_namespace, we recommend that partners use a string that identifies the AWS customer within the partner's system. This should not be the customer's AWS account ID.
event_name is determined by the partner, and should uniquely identify an event-generating resource within the partner system. This should help AWS customers decide whether to create an event bus to receive these events.
See also: AWS API Documentation
Request Syntax
client.create_partner_event_source(
Name='string',
Account='string'
)
string
[REQUIRED]
The name of the partner event source. This name must be unique and must be in the format ``partner_name/event_namespace/event_name ``. The AWS account that wants to use this partner event source must create a partner event bus with a name that matches the name of the partner event source.
string
[REQUIRED]
The AWS account ID of the customer who is permitted to create a matching partner event bus for this partner event source.
dict
Response Syntax
{
'EventSourceArn': 'string'
}
Response Structure
(dict) --
EventSourceArn (string) --
The ARN of the partner event source.
This operation is used by SaaS partners to delete a partner event source. AWS customers don't use this operation.
When you delete an event source, the status of the corresponding partner event bus in the AWS customer account becomes DELETED.
See also: AWS API Documentation
Request Syntax
client.delete_partner_event_source(
Name='string',
Account='string'
)
string
[REQUIRED]
The name of the event source to delete.
string
[REQUIRED]
The AWS account ID of the AWS customer that the event source was created for.
None
Activates a partner event source that has been deactivated. Once activated, your matching event bus will start receiving events from the event source.
See also: AWS API Documentation
Request Syntax
client.activate_event_source(
Name='string'
)
string
[REQUIRED]
The name of the partner event source to activate.
None
{'EventBusName': 'string'}
Deletes the specified rule.
Before you can delete the rule, you must remove all targets, using RemoveTargets.
When you delete a rule, incoming events might continue to match to the deleted rule. Allow a short period of time for changes to take effect.
Managed rules are rules created and managed by another AWS service on your behalf. These rules are created by those other AWS services to support functionality in those services. You can delete these rules using the Force option, but you should do so only if you're sure that the other service isn't still using that rule.
See also: AWS API Documentation
Request Syntax
client.delete_rule(
Name='string',
EventBusName='string',
Force=True|False
)
string
[REQUIRED]
The name of the rule.
string
The event bus associated with the rule. If you omit this, the default event bus is used.
boolean
If this is a managed rule, created by an AWS service on your behalf, you must specify Force as True to delete the rule. This parameter is ignored for rules that are not managed rules. You can check whether a rule is a managed rule by using DescribeRule or ListRules and checking the ManagedBy field of the response.
None
{'Name': 'string'}
Displays details about an event bus in your account. This can include the external AWS accounts that are permitted to write events to your default event bus, and the associated policy. For custom event buses and partner event buses, it displays the name, ARN, policy, state, and creation time.
To enable your account to receive events from other accounts on its default event bus, use PutPermission.
For more information about partner event buses, see CreateEventBus.
See also: AWS API Documentation
Request Syntax
client.describe_event_bus(
Name='string'
)
string
The name of the event bus to show details for. If you omit this, the default event bus is displayed.
dict
Response Syntax
{
'Name': 'string',
'Arn': 'string',
'Policy': 'string'
}
Response Structure
(dict) --
Name (string) --
The name of the event bus. Currently, this is always default.
Arn (string) --
The Amazon Resource Name (ARN) of the account permitted to write events to the current account.
Policy (string) --
The policy that enables the external account to send events to your account.
{'EventBusName': 'string'}
Describes the specified rule.
DescribeRule doesn't list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
See also: AWS API Documentation
Request Syntax
client.describe_rule(
Name='string',
EventBusName='string'
)
string
[REQUIRED]
The name of the rule.
string
The event bus associated with the rule. If you omit this, the default event bus is used.
dict
Response Syntax
{
'Name': 'string',
'Arn': 'string',
'EventPattern': 'string',
'ScheduleExpression': 'string',
'State': 'ENABLED'|'DISABLED',
'Description': 'string',
'RoleArn': 'string',
'ManagedBy': 'string',
'EventBusName': 'string'
}
Response Structure
(dict) --
Name (string) --
The name of the rule.
Arn (string) --
The Amazon Resource Name (ARN) of the rule.
EventPattern (string) --
The event pattern. For more information, see Event Patterns in the Amazon EventBridge User Guide.
ScheduleExpression (string) --
The scheduling expression: for example, "cron(0 20 * * ? *)" or "rate(5 minutes)".
State (string) --
Specifies whether the rule is enabled or disabled.
Description (string) --
The description of the rule.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role associated with the rule.
ManagedBy (string) --
If this is a managed rule, created by an AWS service on your behalf, this field displays the principal name of the AWS service that created the rule.
EventBusName (string) --
The event bus associated with the rule.
{'EventBusName': 'string'}
Disables the specified rule. A disabled rule won't match any events and won't self-trigger if it has a schedule expression.
When you disable a rule, incoming events might continue to match to the disabled rule. Allow a short period of time for changes to take effect.
See also: AWS API Documentation
Request Syntax
client.disable_rule(
Name='string',
EventBusName='string'
)
string
[REQUIRED]
The name of the rule.
string
The event bus associated with the rule. If you omit this, the default event bus is used.
None
{'EventBusName': 'string'}
Enables the specified rule. If the rule doesn't exist, the operation fails.
When you enable a rule, incoming events might not immediately start matching to a newly enabled rule. Allow a short period of time for changes to take effect.
See also: AWS API Documentation
Request Syntax
client.enable_rule(
Name='string',
EventBusName='string'
)
string
[REQUIRED]
The name of the rule.
string
The event bus associated with the rule. If you omit this, the default event bus is used.
None
{'EventBusName': 'string'}
Lists the rules for the specified target. You can see which rules can invoke a specific target in your account.
See also: AWS API Documentation
Request Syntax
client.list_rule_names_by_target(
TargetArn='string',
EventBusName='string',
NextToken='string',
Limit=123
)
string
[REQUIRED]
The Amazon Resource Name (ARN) of the target resource.
string
Limits the results to show only the rules associated with the specified event bus.
string
The token returned by a previous call to retrieve the next set of results.
integer
The maximum number of results to return.
dict
Response Syntax
{
'RuleNames': [
'string',
],
'NextToken': 'string'
}
Response Structure
(dict) --
RuleNames (list) --
The names of the rules that can invoke the given target.
(string) --
NextToken (string) --
Indicates whether there are additional results to retrieve. If there are no more results, the value is null.
{'EventBusName': 'string'}
Response {'Rules': {'EventBusName': 'string'}}
Lists your EventBridge rules. You can either list all the rules or provide a prefix to match to the rule names.
ListRules doesn't list the targets of a rule. To see the targets associated with a rule, use ListTargetsByRule.
See also: AWS API Documentation
Request Syntax
client.list_rules(
NamePrefix='string',
EventBusName='string',
NextToken='string',
Limit=123
)
string
The prefix matching the rule name.
string
Limits the results to show only the rules associated with the specified event bus.
string
The token returned by a previous call to retrieve the next set of results.
integer
The maximum number of results to return.
dict
Response Syntax
{
'Rules': [
{
'Name': 'string',
'Arn': 'string',
'EventPattern': 'string',
'State': 'ENABLED'|'DISABLED',
'Description': 'string',
'ScheduleExpression': 'string',
'RoleArn': 'string',
'ManagedBy': 'string',
'EventBusName': 'string'
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Rules (list) --
The rules that match the specified criteria.
(dict) --
Contains information about a rule in Amazon EventBridge.
Name (string) --
The name of the rule.
Arn (string) --
The Amazon Resource Name (ARN) of the rule.
EventPattern (string) --
The event pattern of the rule. For more information, see Event Patterns in the Amazon EventBridge User Guide.
State (string) --
The state of the rule.
Description (string) --
The description of the rule.
ScheduleExpression (string) --
The scheduling expression: for example, "cron(0 20 * * ? *)" or "rate(5 minutes)".
RoleArn (string) --
The Amazon Resource Name (ARN) of the role that is used for target invocation.
ManagedBy (string) --
If an AWS service created the rule on behalf of your account, this field displays the principal name of the service that created the rule.
EventBusName (string) --
The event bus associated with the rule.
NextToken (string) --
Indicates whether there are additional results to retrieve. If there are no more results, the value is null.
{'EventBusName': 'string'}
Lists the targets assigned to the specified rule.
See also: AWS API Documentation
Request Syntax
client.list_targets_by_rule(
Rule='string',
EventBusName='string',
NextToken='string',
Limit=123
)
string
[REQUIRED]
The name of the rule.
string
The event bus associated with the rule. If you omit this, the default event bus is used.
string
The token returned by a previous call to retrieve the next set of results.
integer
The maximum number of results to return.
dict
Response Syntax
{
'Targets': [
{
'Id': 'string',
'Arn': 'string',
'RoleArn': 'string',
'Input': 'string',
'InputPath': 'string',
'InputTransformer': {
'InputPathsMap': {
'string': 'string'
},
'InputTemplate': 'string'
},
'KinesisParameters': {
'PartitionKeyPath': 'string'
},
'RunCommandParameters': {
'RunCommandTargets': [
{
'Key': 'string',
'Values': [
'string',
]
},
]
},
'EcsParameters': {
'TaskDefinitionArn': 'string',
'TaskCount': 123,
'LaunchType': 'EC2'|'FARGATE',
'NetworkConfiguration': {
'awsvpcConfiguration': {
'Subnets': [
'string',
],
'SecurityGroups': [
'string',
],
'AssignPublicIp': 'ENABLED'|'DISABLED'
}
},
'PlatformVersion': 'string',
'Group': 'string'
},
'BatchParameters': {
'JobDefinition': 'string',
'JobName': 'string',
'ArrayProperties': {
'Size': 123
},
'RetryStrategy': {
'Attempts': 123
}
},
'SqsParameters': {
'MessageGroupId': 'string'
}
},
],
'NextToken': 'string'
}
Response Structure
(dict) --
Targets (list) --
The targets assigned to the rule.
(dict) --
Targets are the resources to be invoked when a rule is triggered. For a complete list of services and resources that can be set as a target, see PutTargets.
If you're setting the event bus of another account as the target and that account granted permission to your account through an organization instead of directly by the account ID, you must specify a RoleArn with proper permissions in the Target structure. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
Id (string) --
The ID of the target.
Arn (string) --
The Amazon Resource Name (ARN) of the target.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role to be used for this target when the rule is triggered. If one rule triggers multiple targets, you can use a different IAM role for each target.
Input (string) --
Valid JSON text passed to the target. In this case, nothing from the event itself is passed to the target. For more information, see The JavaScript Object Notation (JSON) Data Interchange Format.
InputPath (string) --
The value of the JSONPath that is used for extracting part of the matched event when passing it to the target. You must use JSON dot notation, not bracket notation. For more information about JSON paths, see JSONPath.
InputTransformer (dict) --
Settings to enable you to provide custom input to a target based on certain event data. You can extract one or more key-value pairs from the event and then use that data to send customized input to the target.
InputPathsMap (dict) --
Map of JSON paths to be extracted from the event. You can then insert these in the template in InputTemplate to produce the output to be sent to the target.
InputPathsMap is an array key-value pairs, where each value is a valid JSON path. You can have as many as 10 key-value pairs. You must use JSON dot notation, not bracket notation.
The keys can't start with "AWS".
(string) --
(string) --
InputTemplate (string) --
Input template where you specify placeholders that will be filled with the values of the keys from InputPathsMap to customize the data sent to the target. Enclose each InputPathsMaps value in brackets: <value>. The InputTemplate must be valid JSON.
If InputTemplate is a JSON object (surrounded by curly braces), the following restrictions apply:
The placeholder can't be used as an object key
Object values can't include quote marks
The following example shows the syntax for using InputPathsMap and InputTemplate.
"InputTransformer":
{
"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},
"InputTemplate": "<instance> is in state <status>"
}
To have the InputTemplate include quote marks within a JSON string, escape each quote marks with a slash, as in the following example:
"InputTransformer":
{
"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},
"InputTemplate": "<instance> is in state \"<status>\""
}
KinesisParameters (dict) --
The custom parameter that you can use to control the shard assignment when the target is a Kinesis data stream. If you don't include this parameter, the default is to use the eventId as the partition key.
PartitionKeyPath (string) --
The JSON path to be extracted from the event and used as the partition key. For more information, see Amazon Kinesis Streams Key Concepts in the Amazon Kinesis Streams Developer Guide.
RunCommandParameters (dict) --
Parameters used when you are using the rule to invoke Amazon EC2 Run Command.
RunCommandTargets (list) --
Currently, we support including only one RunCommandTarget block, which specifies either an array of InstanceIds or a tag.
(dict) --
Information about the EC2 instances that are to be sent the command, specified as key-value pairs. Each RunCommandTarget block can include only one key, but this key can specify multiple values.
Key (string) --
Can be either tag: tag-key or InstanceIds.
Values (list) --
If Key is tag: tag-key, Values is a list of tag values. If Key is InstanceIds, Values is a list of Amazon EC2 instance IDs.
(string) --
EcsParameters (dict) --
Contains the Amazon ECS task definition and task count to be used if the event target is an Amazon ECS task. For more information about Amazon ECS tasks, see Task Definitions in the Amazon EC2 Container Service Developer Guide.
TaskDefinitionArn (string) --
The ARN of the task definition to use if the event target is an Amazon ECS task.
TaskCount (integer) --
The number of tasks to create based on TaskDefinition. The default is 1.
LaunchType (string) --
Specifies the launch type on which your task is running. The launch type that you specify here must match one of the launch type (compatibilities) of the target task. The FARGATE value is supported only in the Regions where AWS Fargate with Amazon ECS is supported. For more information, see AWS Fargate on Amazon ECS in the Amazon Elastic Container Service Developer Guide.
NetworkConfiguration (dict) --
Use this structure if the ECS task uses the awsvpc network mode. This structure specifies the VPC subnets and security groups associated with the task and whether a public IP address is to be used. This structure is required if LaunchType is FARGATE because the awsvpc mode is required for Fargate tasks.
If you specify NetworkConfiguration when the target ECS task doesn't use the awsvpc network mode, the task fails.
awsvpcConfiguration (dict) --
Use this structure to specify the VPC subnets and security groups for the task and whether a public IP address is to be used. This structure is relevant only for ECS tasks that use the awsvpc network mode.
Subnets (list) --
Specifies the subnets associated with the task. These subnets must all be in the same VPC. You can specify as many as 16 subnets.
(string) --
SecurityGroups (list) --
Specifies the security groups associated with the task. These security groups must all be in the same VPC. You can specify as many as five security groups. If you don't specify a security group, the default security group for the VPC is used.
(string) --
AssignPublicIp (string) --
Specifies whether the task's elastic network interface receives a public IP address. You can specify ENABLED only when LaunchType in EcsParameters is set to FARGATE.
PlatformVersion (string) --
Specifies the platform version for the task. Specify only the numeric portion of the platform version, such as 1.1.0.
This structure is used only if LaunchType is FARGATE. For more information about valid platform versions, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
Group (string) --
Specifies an ECS task group for the task. The maximum length is 255 characters.
BatchParameters (dict) --
If the event target is an AWS Batch job, this contains the job definition, job name, and other parameters. For more information, see Jobs in the AWS Batch User Guide.
JobDefinition (string) --
The ARN or name of the job definition to use if the event target is an AWS Batch job. This job definition must already exist.
JobName (string) --
The name to use for this execution of the job, if the target is an AWS Batch job.
ArrayProperties (dict) --
The array properties for the submitted job, such as the size of the array. The array size can be between 2 and 10,000. If you specify array properties for a job, it becomes an array job. This parameter is used only if the target is an AWS Batch job.
Size (integer) --
The size of the array, if this is an array batch job. Valid values are integers between 2 and 10,000.
RetryStrategy (dict) --
The retry strategy to use for failed jobs if the target is an AWS Batch job. The retry strategy is the number of times to retry the failed job execution. Valid values are 1–10. When you specify a retry strategy here, it overrides the retry strategy defined in the job definition.
Attempts (integer) --
The number of times to attempt to retry, if the job fails. Valid values are 1–10.
SqsParameters (dict) --
Contains the message group ID to use when the target is a FIFO queue.
If you specify an SQS FIFO queue as a target, the queue must have content-based deduplication enabled.
MessageGroupId (string) --
The FIFO message group ID to use as the target.
NextToken (string) --
Indicates whether there are additional results to retrieve. If there are no more results, the value is null.
{'Entries': {'EventBusName': 'string'}}
Sends custom events to EventBridge so that they can be matched to rules. These events can be from your custom applications and services.
See also: AWS API Documentation
Request Syntax
client.put_events(
Entries=[
{
'Time': datetime(2015, 1, 1),
'Source': 'string',
'Resources': [
'string',
],
'DetailType': 'string',
'Detail': 'string',
'EventBusName': 'string'
},
]
)
list
[REQUIRED]
The entry that defines an event in your system. You can specify several parameters for the entry such as the source and type of the event, resources associated with the event, and so on.
(dict) --
Represents an event to be submitted.
Time (datetime) --
The timestamp of the event, per RFC3339. If no timestamp is provided, the timestamp of the PutEvents call is used.
Source (string) --
The source of the event. This field is required.
Resources (list) --
AWS resources, identified by Amazon Resource Name (ARN), that the event primarily concerns. Any number, including zero, can be present.
(string) --
DetailType (string) --
Free-form string used to decide which fields to expect in the event detail.
Detail (string) --
A valid JSON string. There is no other schema imposed. The JSON string can contain fields and nested subobjects.
EventBusName (string) --
The event bus that will receive the event. Only the rules that are associated with this event bus can match the event.
dict
Response Syntax
{
'FailedEntryCount': 123,
'Entries': [
{
'EventId': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
FailedEntryCount (integer) --
The number of failed entries.
Entries (list) --
The successfully and unsuccessfully ingested events results. If the ingestion was successful, the entry has the event ID in it. Otherwise, you can use the error code and error message to identify the problem with the entry.
(dict) --
Represents an event that failed to be submitted.
EventId (string) --
The ID of the event.
ErrorCode (string) --
The error code that indicates why the event submission failed.
ErrorMessage (string) --
The error message that explains why the event submission failed.
{'EventBusName': 'string'}
Running PutPermission permits the specified AWS account or AWS organization to put events to the specified event bus. Rules in your account are triggered by these events arriving to an event bus in your account.
For another account to send events to your account, that external account must have a rule with your account's event bus as a target.
To enable multiple AWS accounts to put events to an event bus, run PutPermission once for each of these accounts. Or, if all the accounts are members of the same AWS organization, you can run PutPermission once specifying Principal as "*" and specifying the AWS organization ID in Condition, to grant permissions to all accounts in that organization.
If you grant permissions using an organization, then accounts in that organization must specify a RoleArn with proper permissions when they use PutTarget to add your account's event bus as a target. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
The permission policy on an event bus can't exceed 10 KB in size.
See also: AWS API Documentation
Request Syntax
client.put_permission(
EventBusName='string',
Action='string',
Principal='string',
StatementId='string',
Condition={
'Type': 'string',
'Key': 'string',
'Value': 'string'
}
)
string
The event bus associated with the rule. If you omit this, the default event bus is used.
string
[REQUIRED]
The action that you're enabling the other account to perform. Currently, this must be events:PutEvents.
string
[REQUIRED]
The 12-digit AWS account ID that you are permitting to put events to your default event bus. Specify "*" to permit any account to put events to your default event bus.
If you specify "*" without specifying Condition, avoid creating rules that might match undesirable events. To create more secure rules, make sure that the event pattern for each rule contains an account field with a specific account ID to receive events from. Rules with an account field don't match any events sent from other accounts.
string
[REQUIRED]
An identifier string for the external account that you're granting permissions to. If you later want to revoke the permission for this external account, specify this StatementId when you run RemovePermission.
dict
This parameter enables you to limit the permission to accounts that fulfill a certain condition, such as being a member of a certain AWS organization. For more information about AWS Organizations, see What Is AWS Organizations? in the AWS Organizations User Guide.
If you specify Condition with an AWS organization ID and specify "*" as the value for Principal, you grant permission to all the accounts in the named organization.
The Condition is a JSON string that must contain Type, Key, and Value fields.
Type (string) -- [REQUIRED]
The type of condition. Currently, the only supported value is StringEquals.
Key (string) -- [REQUIRED]
The key for the condition. Currently, the only supported key is aws:PrincipalOrgID.
Value (string) -- [REQUIRED]
The value for the key. Currently, this must be the ID of the organization.
None
{'EventBusName': 'string'}
Creates or updates the specified rule. Rules are enabled by default or based on value of the state. You can disable a rule using DisableRule.
A single rule watches for events from a single event bus. Events generated by AWS services go to your account's default event bus. Events generated by SaaS partner services or applications go to the matching partner event bus. If you have custom applications or services, you can specify whether their events go to your default event bus or a custom event bus that you have created. For more information, see CreateEventBus.
If you're updating an existing rule, the rule is replaced with what you specify in this PutRule command. If you omit arguments in PutRule, the old values for those arguments aren't kept. Instead, they're replaced with null values.
When you create or update a rule, incoming events might not immediately start matching to new or updated rules. Allow a short period of time for changes to take effect.
A rule must contain at least an EventPattern or ScheduleExpression. Rules with EventPatterns are triggered when a matching event is observed. Rules with ScheduleExpressions self-trigger based on the given schedule. A rule can have both an EventPattern and a ScheduleExpression, in which case the rule triggers on matching events as well as on a schedule.
When you initially create a rule, you can optionally assign one or more tags to the rule. Tags can help you organize and categorize your resources. You can also use them to scope user permissions, by granting a user permission to access or change only rules with certain tag values. To use the PutRule operation and assign tags, you must have both the events:PutRule and events:TagResource permissions.
If you are updating an existing rule, any tags you specify in the PutRule operation are ignored. To update the tags of an existing rule, use TagResource and UntagResource.
Most services in AWS treat : or / as the same character in Amazon Resource Names (ARNs). However, EventBridge uses an exact match in event patterns and rules. Be sure to use the correct ARN characters when creating event patterns so that they match the ARN syntax in the event that you want to match.
In EventBridge, you could create rules that lead to infinite loops, where a rule is fired repeatedly. For example, a rule might detect that ACLs have changed on an S3 bucket, and trigger software to change them to the desired state. If you don't write the rule carefully, the subsequent change to the ACLs fires the rule again, creating an infinite loop.
To prevent this, write the rules so that the triggered actions don't refire the same rule. For example, your rule could fire only if ACLs are found to be in a bad state, instead of after any change.
An infinite loop can quickly cause higher than expected charges. We recommend that you use budgeting, which alerts you when charges exceed your specified limit. For more information, see Managing Your Costs with Budgets.
See also: AWS API Documentation
Request Syntax
client.put_rule(
Name='string',
ScheduleExpression='string',
EventPattern='string',
State='ENABLED'|'DISABLED',
Description='string',
RoleArn='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
EventBusName='string'
)
string
[REQUIRED]
The name of the rule that you're creating or updating.
string
The scheduling expression: for example, "cron(0 20 * * ? *)" or "rate(5 minutes)".
string
The event pattern. For more information, see Event Patterns in the Amazon EventBridge User Guide.
string
Indicates whether the rule is enabled or disabled.
string
A description of the rule.
string
The Amazon Resource Name (ARN) of the IAM role associated with the rule.
list
The list of key-value pairs to associate with the rule.
(dict) --
A key-value pair associated with an AWS resource. In EventBridge, rules support tagging.
Key (string) -- [REQUIRED]
A string that you can use to assign a value. The combination of tag keys and values can help you organize and categorize your resources.
Value (string) -- [REQUIRED]
The value for the specified tag key.
string
The event bus to associate with this rule. If you omit this, the default event bus is used.
dict
Response Syntax
{
'RuleArn': 'string'
}
Response Structure
(dict) --
RuleArn (string) --
The Amazon Resource Name (ARN) of the rule.
{'EventBusName': 'string'}
Adds the specified targets to the specified rule, or updates the targets if they're already associated with the rule.
Targets are the resources that are invoked when a rule is triggered.
You can configure the following as targets in EventBridge:
EC2 instances
SSM Run Command
SSM Automation
AWS Lambda functions
Data streams in Amazon Kinesis Data Streams
Data delivery streams in Amazon Kinesis Data Firehose
Amazon ECS tasks
AWS Step Functions state machines
AWS Batch jobs
AWS CodeBuild projects
Pipelines in AWS CodePipeline
Amazon Inspector assessment templates
Amazon SNS topics
Amazon SQS queues, including FIFO queues
The default event bus of another AWS account
Creating rules with built-in targets is supported only on the AWS Management Console. The built-in targets are EC2 CreateSnapshot API call, EC2 RebootInstances API call, EC2 StopInstances API call, and EC2 TerminateInstances API call.
For some target types, PutTargets provides target-specific parameters. If the target is a Kinesis data stream, you can optionally specify which shard the event goes to by using the KinesisParameters argument. To invoke a command on multiple EC2 instances with one rule, you can use the RunCommandParameters field.
To be able to make API calls against the resources that you own, Amazon EventBridge needs the appropriate permissions. For AWS Lambda and Amazon SNS resources, EventBridge relies on resource-based policies. For EC2 instances, Kinesis data streams, and AWS Step Functions state machines, EventBridge relies on IAM roles that you specify in the RoleARN argument in PutTargets. For more information, see Authentication and Access Control in the Amazon EventBridge User Guide.
If another AWS account is in the same Region and has granted you permission (using PutPermission), you can send events to that account. Set that account's event bus as a target of the rules in your account. To send the matched events to the other account, specify that account's event bus as the Arn value when you run PutTargets. If your account sends events to another account, your account is charged for each sent event. Each event sent to another account is charged as a custom event. The account receiving the event isn't charged. For more information, see Amazon EventBridge Pricing.
If you're setting an event bus in another account as the target and that account granted permission to your account through an organization instead of directly by the account ID, you must specify a RoleArn with proper permissions in the Target structure. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
For more information about enabling cross-account events, see PutPermission.
Input, InputPath, and InputTransformer are mutually exclusive and optional parameters of a target. When a rule is triggered due to a matched event:
If none of the following arguments are specified for a target, the entire event is passed to the target in JSON format (unless the target is Amazon EC2 Run Command or Amazon ECS task, in which case nothing from the event is passed to the target).
If Input is specified in the form of valid JSON, then the matched event is overridden with this constant.
If InputPath is specified in the form of JSONPath (for example, $.detail), only the part of the event specified in the path is passed to the target (for example, only the detail part of the event is passed).
If InputTransformer is specified, one or more specified JSONPaths are extracted from the event and used as values in a template that you specify as the input to the target.
When you specify InputPath or InputTransformer, you must use JSON dot notation, not bracket notation.
When you add targets to a rule and the associated rule triggers soon after, new or updated targets might not be immediately invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens, FailedEntryCount is nonzero in the response, and each entry in FailedEntries provides the ID of the failed target and the error code.
See also: AWS API Documentation
Request Syntax
client.put_targets(
Rule='string',
EventBusName='string',
Targets=[
{
'Id': 'string',
'Arn': 'string',
'RoleArn': 'string',
'Input': 'string',
'InputPath': 'string',
'InputTransformer': {
'InputPathsMap': {
'string': 'string'
},
'InputTemplate': 'string'
},
'KinesisParameters': {
'PartitionKeyPath': 'string'
},
'RunCommandParameters': {
'RunCommandTargets': [
{
'Key': 'string',
'Values': [
'string',
]
},
]
},
'EcsParameters': {
'TaskDefinitionArn': 'string',
'TaskCount': 123,
'LaunchType': 'EC2'|'FARGATE',
'NetworkConfiguration': {
'awsvpcConfiguration': {
'Subnets': [
'string',
],
'SecurityGroups': [
'string',
],
'AssignPublicIp': 'ENABLED'|'DISABLED'
}
},
'PlatformVersion': 'string',
'Group': 'string'
},
'BatchParameters': {
'JobDefinition': 'string',
'JobName': 'string',
'ArrayProperties': {
'Size': 123
},
'RetryStrategy': {
'Attempts': 123
}
},
'SqsParameters': {
'MessageGroupId': 'string'
}
},
]
)
string
[REQUIRED]
The name of the rule.
string
The name of the event bus associated with the rule. If you omit this, the default event bus is used.
list
[REQUIRED]
The targets to update or add to the rule.
(dict) --
Targets are the resources to be invoked when a rule is triggered. For a complete list of services and resources that can be set as a target, see PutTargets.
If you're setting the event bus of another account as the target and that account granted permission to your account through an organization instead of directly by the account ID, you must specify a RoleArn with proper permissions in the Target structure. For more information, see Sending and Receiving Events Between AWS Accounts in the Amazon EventBridge User Guide.
Id (string) -- [REQUIRED]
The ID of the target.
Arn (string) -- [REQUIRED]
The Amazon Resource Name (ARN) of the target.
RoleArn (string) --
The Amazon Resource Name (ARN) of the IAM role to be used for this target when the rule is triggered. If one rule triggers multiple targets, you can use a different IAM role for each target.
Input (string) --
Valid JSON text passed to the target. In this case, nothing from the event itself is passed to the target. For more information, see The JavaScript Object Notation (JSON) Data Interchange Format.
InputPath (string) --
The value of the JSONPath that is used for extracting part of the matched event when passing it to the target. You must use JSON dot notation, not bracket notation. For more information about JSON paths, see JSONPath.
InputTransformer (dict) --
Settings to enable you to provide custom input to a target based on certain event data. You can extract one or more key-value pairs from the event and then use that data to send customized input to the target.
InputPathsMap (dict) --
Map of JSON paths to be extracted from the event. You can then insert these in the template in InputTemplate to produce the output to be sent to the target.
InputPathsMap is an array key-value pairs, where each value is a valid JSON path. You can have as many as 10 key-value pairs. You must use JSON dot notation, not bracket notation.
The keys can't start with "AWS".
(string) --
(string) --
InputTemplate (string) -- [REQUIRED]
Input template where you specify placeholders that will be filled with the values of the keys from InputPathsMap to customize the data sent to the target. Enclose each InputPathsMaps value in brackets: <value>. The InputTemplate must be valid JSON.
If InputTemplate is a JSON object (surrounded by curly braces), the following restrictions apply:
The placeholder can't be used as an object key
Object values can't include quote marks
The following example shows the syntax for using InputPathsMap and InputTemplate.
"InputTransformer":
{
"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},
"InputTemplate": "<instance> is in state <status>"
}
To have the InputTemplate include quote marks within a JSON string, escape each quote marks with a slash, as in the following example:
"InputTransformer":
{
"InputPathsMap": {"instance": "$.detail.instance","status": "$.detail.status"},
"InputTemplate": "<instance> is in state \"<status>\""
}
KinesisParameters (dict) --
The custom parameter that you can use to control the shard assignment when the target is a Kinesis data stream. If you don't include this parameter, the default is to use the eventId as the partition key.
PartitionKeyPath (string) -- [REQUIRED]
The JSON path to be extracted from the event and used as the partition key. For more information, see Amazon Kinesis Streams Key Concepts in the Amazon Kinesis Streams Developer Guide.
RunCommandParameters (dict) --
Parameters used when you are using the rule to invoke Amazon EC2 Run Command.
RunCommandTargets (list) -- [REQUIRED]
Currently, we support including only one RunCommandTarget block, which specifies either an array of InstanceIds or a tag.
(dict) --
Information about the EC2 instances that are to be sent the command, specified as key-value pairs. Each RunCommandTarget block can include only one key, but this key can specify multiple values.
Key (string) -- [REQUIRED]
Can be either tag: tag-key or InstanceIds.
Values (list) -- [REQUIRED]
If Key is tag: tag-key, Values is a list of tag values. If Key is InstanceIds, Values is a list of Amazon EC2 instance IDs.
(string) --
EcsParameters (dict) --
Contains the Amazon ECS task definition and task count to be used if the event target is an Amazon ECS task. For more information about Amazon ECS tasks, see Task Definitions in the Amazon EC2 Container Service Developer Guide.
TaskDefinitionArn (string) -- [REQUIRED]
The ARN of the task definition to use if the event target is an Amazon ECS task.
TaskCount (integer) --
The number of tasks to create based on TaskDefinition. The default is 1.
LaunchType (string) --
Specifies the launch type on which your task is running. The launch type that you specify here must match one of the launch type (compatibilities) of the target task. The FARGATE value is supported only in the Regions where AWS Fargate with Amazon ECS is supported. For more information, see AWS Fargate on Amazon ECS in the Amazon Elastic Container Service Developer Guide.
NetworkConfiguration (dict) --
Use this structure if the ECS task uses the awsvpc network mode. This structure specifies the VPC subnets and security groups associated with the task and whether a public IP address is to be used. This structure is required if LaunchType is FARGATE because the awsvpc mode is required for Fargate tasks.
If you specify NetworkConfiguration when the target ECS task doesn't use the awsvpc network mode, the task fails.
awsvpcConfiguration (dict) --
Use this structure to specify the VPC subnets and security groups for the task and whether a public IP address is to be used. This structure is relevant only for ECS tasks that use the awsvpc network mode.
Subnets (list) -- [REQUIRED]
Specifies the subnets associated with the task. These subnets must all be in the same VPC. You can specify as many as 16 subnets.
(string) --
SecurityGroups (list) --
Specifies the security groups associated with the task. These security groups must all be in the same VPC. You can specify as many as five security groups. If you don't specify a security group, the default security group for the VPC is used.
(string) --
AssignPublicIp (string) --
Specifies whether the task's elastic network interface receives a public IP address. You can specify ENABLED only when LaunchType in EcsParameters is set to FARGATE.
PlatformVersion (string) --
Specifies the platform version for the task. Specify only the numeric portion of the platform version, such as 1.1.0.
This structure is used only if LaunchType is FARGATE. For more information about valid platform versions, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
Group (string) --
Specifies an ECS task group for the task. The maximum length is 255 characters.
BatchParameters (dict) --
If the event target is an AWS Batch job, this contains the job definition, job name, and other parameters. For more information, see Jobs in the AWS Batch User Guide.
JobDefinition (string) -- [REQUIRED]
The ARN or name of the job definition to use if the event target is an AWS Batch job. This job definition must already exist.
JobName (string) -- [REQUIRED]
The name to use for this execution of the job, if the target is an AWS Batch job.
ArrayProperties (dict) --
The array properties for the submitted job, such as the size of the array. The array size can be between 2 and 10,000. If you specify array properties for a job, it becomes an array job. This parameter is used only if the target is an AWS Batch job.
Size (integer) --
The size of the array, if this is an array batch job. Valid values are integers between 2 and 10,000.
RetryStrategy (dict) --
The retry strategy to use for failed jobs if the target is an AWS Batch job. The retry strategy is the number of times to retry the failed job execution. Valid values are 1–10. When you specify a retry strategy here, it overrides the retry strategy defined in the job definition.
Attempts (integer) --
The number of times to attempt to retry, if the job fails. Valid values are 1–10.
SqsParameters (dict) --
Contains the message group ID to use when the target is a FIFO queue.
If you specify an SQS FIFO queue as a target, the queue must have content-based deduplication enabled.
MessageGroupId (string) --
The FIFO message group ID to use as the target.
dict
Response Syntax
{
'FailedEntryCount': 123,
'FailedEntries': [
{
'TargetId': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
FailedEntryCount (integer) --
The number of failed entries.
FailedEntries (list) --
The failed target entries.
(dict) --
Represents a target that failed to be added to a rule.
TargetId (string) --
The ID of the target.
ErrorCode (string) --
The error code that indicates why the target addition failed. If the value is ConcurrentModificationException, too many requests were made at the same time.
ErrorMessage (string) --
The error message that explains why the target addition failed.
{'EventBusName': 'string'}
Revokes the permission of another AWS account to be able to put events to the specified event bus. Specify the account to revoke by the StatementId value that you associated with the account when you granted it permission with PutPermission. You can find the StatementId by using DescribeEventBus.
See also: AWS API Documentation
Request Syntax
client.remove_permission(
StatementId='string',
EventBusName='string'
)
string
[REQUIRED]
The statement ID corresponding to the account that is no longer allowed to put events to the default event bus.
string
The name of the event bus to revoke permissions for. If you omit this, the default event bus is used.
None
{'EventBusName': 'string'}
Removes the specified targets from the specified rule. When the rule is triggered, those targets are no longer be invoked.
When you remove a target, when the associated rule triggers, removed targets might continue to be invoked. Allow a short period of time for changes to take effect.
This action can partially fail if too many requests are made at the same time. If that happens, FailedEntryCount is non-zero in the response and each entry in FailedEntries provides the ID of the failed target and the error code.
See also: AWS API Documentation
Request Syntax
client.remove_targets(
Rule='string',
EventBusName='string',
Ids=[
'string',
],
Force=True|False
)
string
[REQUIRED]
The name of the rule.
string
The name of the event bus associated with the rule.
list
[REQUIRED]
The IDs of the targets to remove from the rule.
(string) --
boolean
If this is a managed rule created by an AWS service on your behalf, you must specify Force as True to remove targets. This parameter is ignored for rules that aren't managed rules. You can check whether a rule is a managed rule by using DescribeRule or ListRules and checking the ManagedBy field of the response.
dict
Response Syntax
{
'FailedEntryCount': 123,
'FailedEntries': [
{
'TargetId': 'string',
'ErrorCode': 'string',
'ErrorMessage': 'string'
},
]
}
Response Structure
(dict) --
FailedEntryCount (integer) --
The number of failed entries.
FailedEntries (list) --
The failed target entries.
(dict) --
Represents a target that failed to be removed from a rule.
TargetId (string) --
The ID of the target.
ErrorCode (string) --
The error code that indicates why the target removal failed. If the value is ConcurrentModificationException, too many requests were made at the same time.
ErrorMessage (string) --
The error message that explains why the target removal failed.