2019/12/13 - Amazon Simple Email Service - 1 new2 updated api methods
Changes Update sesv2 client to latest version
Used to configure or change the DKIM authentication settings for an email domain identity. You can use this operation to do any of the following:
Update the signing attributes for an identity that uses Bring Your Own DKIM (BYODKIM).
Change from using no DKIM authentication to using Easy DKIM.
Change from using no DKIM authentication to using BYODKIM.
Change from using Easy DKIM to using BYODKIM.
Change from using BYODKIM to using Easy DKIM.
See also: AWS API Documentation
Request Syntax
client.put_email_identity_dkim_signing_attributes(
EmailIdentity='string',
SigningAttributesOrigin='AWS_SES'|'EXTERNAL',
SigningAttributes={
'DomainSigningSelector': 'string',
'DomainSigningPrivateKey': 'string'
}
)
string
[REQUIRED]
The email identity that you want to configure DKIM for.
string
[REQUIRED]
The method that you want to use to configure DKIM for the identity. There are two possible values:
AWS_SES – Configure DKIM for the identity by using Easy DKIM.
EXTERNAL – Configure DKIM for the identity by using Bring Your Own DKIM (BYODKIM).
dict
An object that contains information about the private key and selector that you want to use to configure DKIM for the identity. This object is only required if you want to configure Bring Your Own DKIM (BYODKIM) for the identity.
DomainSigningSelector (string) -- [REQUIRED]
A string that's used to identify a public key in the DNS configuration for a domain.
DomainSigningPrivateKey (string) -- [REQUIRED]
A private key that's used to generate a DKIM signature.
The private key must use 1024-bit RSA encryption, and must be encoded using base64 encoding.
dict
Response Syntax
{
'DkimStatus': 'PENDING'|'SUCCESS'|'FAILED'|'TEMPORARY_FAILURE'|'NOT_STARTED',
'DkimTokens': [
'string',
]
}
Response Structure
(dict) --
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in JSON format by the service.
DkimStatus (string) --
The DKIM authentication status of the identity. Amazon SES determines the authentication status by searching for specific records in the DNS configuration for your domain. If you used Easy DKIM to set up DKIM authentication, Amazon SES tries to find three unique CNAME records in the DNS configuration for your domain.
If you provided a public key to perform DKIM authentication, Amazon SES tries to find a TXT record that uses the selector that you specified. The value of the TXT record must be a public key that's paired with the private key that you specified in the process of creating the identity.
The status can be one of the following:
PENDING – The verification process was initiated, but Amazon SES hasn't yet detected the DKIM records in the DNS configuration for the domain.
SUCCESS – The verification process completed successfully.
FAILED – The verification process failed. This typically occurs when Amazon SES fails to find the DKIM records in the DNS configuration of the domain.
TEMPORARY_FAILURE – A temporary issue is preventing Amazon SES from determining the DKIM authentication status of the domain.
NOT_STARTED – The DKIM verification process hasn't been initiated for the domain.
DkimTokens (list) --
If you used Easy DKIM to configure DKIM authentication for the domain, then this object contains a set of unique strings that you use to create a set of CNAME records that you add to the DNS configuration for your domain. When Amazon SES detects these records in the DNS configuration for your domain, the DKIM authentication process is complete.
If you configured DKIM authentication for the domain by providing your own public-private key pair, then this object contains the selector that's associated with your public key.
Regardless of the DKIM authentication method you use, Amazon SES searches for the appropriate records in the DNS configuration of the domain for up to 72 hours.
(string) --
{'DkimSigningAttributes': {'DomainSigningPrivateKey': 'string',
'DomainSigningSelector': 'string'}}
Response {'DkimAttributes': {'SigningAttributesOrigin': 'AWS_SES | EXTERNAL'}}
Starts the process of verifying an email identity. An identity is an email address or domain that you use when you send email. Before you can use an identity to send email, you first have to verify it. By verifying an identity, you demonstrate that you're the owner of the identity, and that you've given Amazon SES API v2 permission to send email from the identity.
When you verify an email address, Amazon SES sends an email to the address. Your email address is verified as soon as you follow the link in the verification email.
When you verify a domain without specifying the DkimSigningAttributes object, this operation provides a set of DKIM tokens. You can convert these tokens into CNAME records, which you then add to the DNS configuration for your domain. Your domain is verified when Amazon SES detects these records in the DNS configuration for your domain. This verification method is known as Easy DKIM.
Alternatively, you can perform the verification process by providing your own public-private key pair. This verification method is known as Bring Your Own DKIM (BYODKIM). To use BYODKIM, your call to the CreateEmailIdentity operation has to include the DkimSigningAttributes object. When you specify this object, you provide a selector (a component of the DNS record name that identifies the public key that you want to use for DKIM authentication) and a private key.
See also: AWS API Documentation
Request Syntax
client.create_email_identity(
EmailIdentity='string',
Tags=[
{
'Key': 'string',
'Value': 'string'
},
],
DkimSigningAttributes={
'DomainSigningSelector': 'string',
'DomainSigningPrivateKey': 'string'
}
)
string
[REQUIRED]
The email address or domain that you want to verify.
list
An array of objects that define the tags (keys and values) that you want to associate with the email identity.
(dict) --
An object that defines the tags that are associated with a resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags.
Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for a more specific tag value. A tag value acts as a descriptor within a tag key. A tag key can contain as many as 128 characters. A tag value can contain as many as 256 characters. The characters can be Unicode letters, digits, white space, or one of the following symbols: _ . : / = + -. The following additional restrictions apply to tags:
Tag keys and values are case sensitive.
For each associated resource, each tag key must be unique and it can have only one value.
The aws: prefix is reserved for use by AWS; you can’t use it in any tag keys or values that you define. In addition, you can't edit or remove tag keys or values that use this prefix. Tags that use this prefix don’t count against the limit of 50 tags per resource.
You can associate tags with public or shared resources, but the tags are available only for your AWS account, not any other accounts that share the resource. In addition, the tags are available only for resources that are located in the specified AWS Region for your AWS account.
Key (string) -- [REQUIRED]
One part of a key-value pair that defines a tag. The maximum length of a tag key is 128 characters. The minimum length is 1 character.
Value (string) -- [REQUIRED]
The optional part of a key-value pair that defines a tag. The maximum length of a tag value is 256 characters. The minimum length is 0 characters. If you don't want a resource to have a specific tag value, don't specify a value for this parameter. If you don't specify a value, Amazon SES sets the value to an empty string.
dict
If your request includes this object, Amazon SES configures the identity to use Bring Your Own DKIM (BYODKIM) for DKIM authentication purposes, as opposed to the default method, Easy DKIM.
You can only specify this object if the email identity is a domain, as opposed to an address.
DomainSigningSelector (string) -- [REQUIRED]
A string that's used to identify a public key in the DNS configuration for a domain.
DomainSigningPrivateKey (string) -- [REQUIRED]
A private key that's used to generate a DKIM signature.
The private key must use 1024-bit RSA encryption, and must be encoded using base64 encoding.
dict
Response Syntax
{
'IdentityType': 'EMAIL_ADDRESS'|'DOMAIN'|'MANAGED_DOMAIN',
'VerifiedForSendingStatus': True|False,
'DkimAttributes': {
'SigningEnabled': True|False,
'Status': 'PENDING'|'SUCCESS'|'FAILED'|'TEMPORARY_FAILURE'|'NOT_STARTED',
'Tokens': [
'string',
],
'SigningAttributesOrigin': 'AWS_SES'|'EXTERNAL'
}
}
Response Structure
(dict) --
If the email identity is a domain, this object contains information about the DKIM verification status for the domain.
If the email identity is an email address, this object is empty.
IdentityType (string) --
The email identity type.
VerifiedForSendingStatus (boolean) --
Specifies whether or not the identity is verified. You can only send email from verified email addresses or domains. For more information about verifying identities, see the Amazon Pinpoint User Guide.
DkimAttributes (dict) --
An object that contains information about the DKIM attributes for the identity.
SigningEnabled (boolean) --
If the value is true, then the messages that you send from the identity are signed using DKIM. If the value is false, then the messages that you send from the identity aren't DKIM-signed.
Status (string) --
Describes whether or not Amazon SES has successfully located the DKIM records in the DNS records for the domain. The status can be one of the following:
PENDING – The verification process was initiated, but Amazon SES hasn't yet detected the DKIM records in the DNS configuration for the domain.
SUCCESS – The verification process completed successfully.
FAILED – The verification process failed. This typically occurs when Amazon SES fails to find the DKIM records in the DNS configuration of the domain.
TEMPORARY_FAILURE – A temporary issue is preventing Amazon SES from determining the DKIM authentication status of the domain.
NOT_STARTED – The DKIM verification process hasn't been initiated for the domain.
Tokens (list) --
If you used Easy DKIM to configure DKIM authentication for the domain, then this object contains a set of unique strings that you use to create a set of CNAME records that you add to the DNS configuration for your domain. When Amazon SES detects these records in the DNS configuration for your domain, the DKIM authentication process is complete.
If you configured DKIM authentication for the domain by providing your own public-private key pair, then this object contains the selector for the public key.
Regardless of the DKIM authentication method you use, Amazon SES searches for the appropriate records in the DNS configuration of the domain for up to 72 hours.
(string) --
SigningAttributesOrigin (string) --
A string that indicates how DKIM was configured for the identity. There are two possible values:
AWS_SES – Indicates that DKIM was configured for the identity by using Easy DKIM.
EXTERNAL – Indicates that DKIM was configured for the identity by using Bring Your Own DKIM (BYODKIM).
{'DkimAttributes': {'SigningAttributesOrigin': 'AWS_SES | EXTERNAL'}}
Provides information about a specific identity, including the identity's verification status, its DKIM authentication status, and its custom Mail-From settings.
See also: AWS API Documentation
Request Syntax
client.get_email_identity(
EmailIdentity='string'
)
string
[REQUIRED]
The email identity that you want to retrieve details for.
dict
Response Syntax
{
'IdentityType': 'EMAIL_ADDRESS'|'DOMAIN'|'MANAGED_DOMAIN',
'FeedbackForwardingStatus': True|False,
'VerifiedForSendingStatus': True|False,
'DkimAttributes': {
'SigningEnabled': True|False,
'Status': 'PENDING'|'SUCCESS'|'FAILED'|'TEMPORARY_FAILURE'|'NOT_STARTED',
'Tokens': [
'string',
],
'SigningAttributesOrigin': 'AWS_SES'|'EXTERNAL'
},
'MailFromAttributes': {
'MailFromDomain': 'string',
'MailFromDomainStatus': 'PENDING'|'SUCCESS'|'FAILED'|'TEMPORARY_FAILURE',
'BehaviorOnMxFailure': 'USE_DEFAULT_VALUE'|'REJECT_MESSAGE'
},
'Tags': [
{
'Key': 'string',
'Value': 'string'
},
]
}
Response Structure
(dict) --
Details about an email identity.
IdentityType (string) --
The email identity type.
FeedbackForwardingStatus (boolean) --
The feedback forwarding configuration for the identity.
If the value is true, you receive email notifications when bounce or complaint events occur. These notifications are sent to the address that you specified in the Return-Path header of the original email.
You're required to have a method of tracking bounces and complaints. If you haven't set up another mechanism for receiving bounce or complaint notifications (for example, by setting up an event destination), you receive an email notification when these events occur (even if this setting is disabled).
VerifiedForSendingStatus (boolean) --
Specifies whether or not the identity is verified. You can only send email from verified email addresses or domains. For more information about verifying identities, see the Amazon Pinpoint User Guide.
DkimAttributes (dict) --
An object that contains information about the DKIM attributes for the identity.
SigningEnabled (boolean) --
If the value is true, then the messages that you send from the identity are signed using DKIM. If the value is false, then the messages that you send from the identity aren't DKIM-signed.
Status (string) --
Describes whether or not Amazon SES has successfully located the DKIM records in the DNS records for the domain. The status can be one of the following:
PENDING – The verification process was initiated, but Amazon SES hasn't yet detected the DKIM records in the DNS configuration for the domain.
SUCCESS – The verification process completed successfully.
FAILED – The verification process failed. This typically occurs when Amazon SES fails to find the DKIM records in the DNS configuration of the domain.
TEMPORARY_FAILURE – A temporary issue is preventing Amazon SES from determining the DKIM authentication status of the domain.
NOT_STARTED – The DKIM verification process hasn't been initiated for the domain.
Tokens (list) --
If you used Easy DKIM to configure DKIM authentication for the domain, then this object contains a set of unique strings that you use to create a set of CNAME records that you add to the DNS configuration for your domain. When Amazon SES detects these records in the DNS configuration for your domain, the DKIM authentication process is complete.
If you configured DKIM authentication for the domain by providing your own public-private key pair, then this object contains the selector for the public key.
Regardless of the DKIM authentication method you use, Amazon SES searches for the appropriate records in the DNS configuration of the domain for up to 72 hours.
(string) --
SigningAttributesOrigin (string) --
A string that indicates how DKIM was configured for the identity. There are two possible values:
AWS_SES – Indicates that DKIM was configured for the identity by using Easy DKIM.
EXTERNAL – Indicates that DKIM was configured for the identity by using Bring Your Own DKIM (BYODKIM).
MailFromAttributes (dict) --
An object that contains information about the Mail-From attributes for the email identity.
MailFromDomain (string) --
The name of a domain that an email identity uses as a custom MAIL FROM domain.
MailFromDomainStatus (string) --
The status of the MAIL FROM domain. This status can have the following values:
PENDING – Amazon SES hasn't started searching for the MX record yet.
SUCCESS – Amazon SES detected the required MX record for the MAIL FROM domain.
FAILED – Amazon SES can't find the required MX record, or the record no longer exists.
TEMPORARY_FAILURE – A temporary issue occurred, which prevented Amazon SES from determining the status of the MAIL FROM domain.
BehaviorOnMxFailure (string) --
The action that you want to take if the required MX record can't be found when you send an email. When you set this value to UseDefaultValue, the mail is sent using amazonses.com as the MAIL FROM domain. When you set this value to RejectMessage, the Amazon SES API v2 returns a MailFromDomainNotVerified error, and doesn't attempt to deliver the email.
These behaviors are taken when the custom MAIL FROM domain configuration is in the Pending, Failed, and TemporaryFailure states.
Tags (list) --
An array of objects that define the tags (keys and values) that are associated with the email identity.
(dict) --
An object that defines the tags that are associated with a resource. A tag is a label that you optionally define and associate with a resource. Tags can help you categorize and manage resources in different ways, such as by purpose, owner, environment, or other criteria. A resource can have as many as 50 tags.
Each tag consists of a required tag key and an associated tag value, both of which you define. A tag key is a general label that acts as a category for a more specific tag value. A tag value acts as a descriptor within a tag key. A tag key can contain as many as 128 characters. A tag value can contain as many as 256 characters. The characters can be Unicode letters, digits, white space, or one of the following symbols: _ . : / = + -. The following additional restrictions apply to tags:
Tag keys and values are case sensitive.
For each associated resource, each tag key must be unique and it can have only one value.
The aws: prefix is reserved for use by AWS; you can’t use it in any tag keys or values that you define. In addition, you can't edit or remove tag keys or values that use this prefix. Tags that use this prefix don’t count against the limit of 50 tags per resource.
You can associate tags with public or shared resources, but the tags are available only for your AWS account, not any other accounts that share the resource. In addition, the tags are available only for resources that are located in the specified AWS Region for your AWS account.
Key (string) --
One part of a key-value pair that defines a tag. The maximum length of a tag key is 128 characters. The minimum length is 1 character.
Value (string) --
The optional part of a key-value pair that defines a tag. The maximum length of a tag value is 256 characters. The minimum length is 0 characters. If you don't want a resource to have a specific tag value, don't specify a value for this parameter. If you don't specify a value, Amazon SES sets the value to an empty string.