2018/11/27 - Amazon EC2 Container Service - 4 updated api methods
Changes Update ecs client to latest version
{'deploymentController': {'type': 'ECS | CODE_DEPLOY'}}
Response {'service': {'deploymentController': {'type': 'ECS | CODE_DEPLOY'},
'taskSets': [{'computedDesiredCount': 'integer',
'createdAt': 'timestamp',
'externalId': 'string',
'id': 'string',
'launchType': 'EC2 | FARGATE',
'loadBalancers': [{'containerName': 'string',
'containerPort': 'integer',
'loadBalancerName': 'string',
'targetGroupArn': 'string'}],
'networkConfiguration': {'awsvpcConfiguration': {'assignPublicIp': 'ENABLED '
'| '
'DISABLED',
'securityGroups': ['string'],
'subnets': ['string']}},
'pendingCount': 'integer',
'platformVersion': 'string',
'runningCount': 'integer',
'scale': {'unit': 'PERCENT', 'value': 'double'},
'stabilityStatus': 'STEADY_STATE | STABILIZING',
'stabilityStatusAt': 'timestamp',
'startedBy': 'string',
'status': 'string',
'taskDefinition': 'string',
'taskSetArn': 'string',
'updatedAt': 'timestamp'}]}}
Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in a service drops below desiredCount, Amazon ECS spawns another copy of the task in the specified cluster. To update an existing service, see UpdateService.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind a load balancer. The load balancer distributes traffic across the tasks that are associated with the service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide.
You can optionally specify a deployment configuration for your service. The deployment is triggered by changing properties, such as the task definition or the desired count of a service, with an UpdateService operation.
If a service is using the ECS deployment controller, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the ECS deployment controller, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the CODE_DEPLOY deployment controller and tasks that use the EC2 launch type, the minimum healthy percent and maximum percent values are only used to define the lower and upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent and maximum percent values are not used, although they are currently visible when describing your service.
Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer. The default value for a replica service for minimumHealthyPercent is 100%. The default value for a daemon service for minimumHealthyPercent is 0%.
When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy) with the placementStrategy parameter):
Sort the valid container instances, giving priority to instances that have the fewest number of running tasks for this service in their respective Availability Zone. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.create_service(
cluster='string',
serviceName='string',
taskDefinition='string',
loadBalancers=[
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
serviceRegistries=[
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
desiredCount=123,
clientToken='string',
launchType='EC2'|'FARGATE',
platformVersion='string',
role='string',
deploymentConfiguration={
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
placementConstraints=[
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
placementStrategy=[
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
healthCheckGracePeriodSeconds=123,
schedulingStrategy='REPLICA'|'DAEMON',
deploymentController={
'type': 'ECS'|'CODE_DEPLOY'
},
tags=[
{
'key': 'string',
'value': 'string'
},
],
enableECSManagedTags=True|False,
propagateTags='TASK_DEFINITION'|'SERVICE'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster on which to run your service. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
string
[REQUIRED]
The family and revision ( family:revision) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used.
list
A load balancer object representing the load balancer to use with your service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). During a deployment, AWS CodeDeploy determines which task set in your service has the status PRIMARY and associates one target group with it, and then associates the other target group with the replacement task set. The load balancer can also have up to two listeners: a required listener for production traffic and an optional listener that allows you perform validation tests with Lambda functions before routing production traffic to it.
After you create a service using the ECS deployment controller, the load balancer name or target group ARN, container name, and container port specified in the service definition are immutable. If you are using the CODE_DEPLOY deployment controller, these values can be changed when updating the service.
For Classic Load Balancers, this object must contain the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer. When a task from this service is placed on a container instance, the container instance is registered with the load balancer specified here.
For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name (as it appears in a container definition), and the container port to access from the load balancer. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group specified here.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance, because tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
list
The details of the service discovery registries to assign to this service. For more information, see Service Discovery.
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Amazon Route 53 Auto Naming. For more information, see Service.
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
integer
The number of instantiations of the specified task definition to place and keep running on your cluster.
string
Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 32 ASCII characters are allowed.
string
The launch type on which to run your service. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
string
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
string
The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition does not use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.
If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly Names and Paths in the IAM User Guide.
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
list
An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints per task (this limit includes constraints in the task definition and those specified at runtime).
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
list
The placement strategy objects to use for tasks in your service. You can specify a maximum of five strategy rules per service.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
dict
The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 7,200 seconds. During that time, the ECS service scheduler ignores health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
string
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions. This scheduler strategy is required if using the CODE_DEPLOY deployment controller.
DAEMON-The daemon scheduling strategy deploys exactly one task on each active container instance that meets all of the task placement constraints that you specify in your cluster. When you are using this strategy, there is no need to specify a desired number of tasks, a task placement strategy, or use Service Auto Scaling policies.
dict
The deployment controller to use for the service.
type (string) -- [REQUIRED]
The deployment controller type to use.
There are two deployment controller types available:
ECS
The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.
CODE_DEPLOY
The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
list
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. When a service is deleted, the tags are deleted as well. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
boolean
Specifies whether to enable Amazon ECS managed tags for the tasks within the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
string
Specifies whether to propagate the tags from the task definition or the service to the tasks. If no value is specified, the tags are not propagated. Tags can only be propagated to the tasks within the service during service creation. To add tags to a task after service creation, use the TagResource API action.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1)
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the create call.
If a service is using the ECS deployment controller, the deploymentController and taskSets parameters will not be returned.
If the service is using the CODE_DEPLOY deployment controller, the deploymentController, taskSets and deployments parameters will be returned, however the deployments parameter will be an empty list.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Amazon Route 53 Auto Naming. For more information, see Service.
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
startedBy (string) --
The tag specified when a task set is started. If the task is started by an AWS CodeDeploy deployment, then the startedBy parameter is CODE_DEPLOY.
externalId (string) --
The deployment ID of the AWS CodeDeploy deployment.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time, or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the service.
value (float) --
The value, specified as a percent total of a service's desiredCount, to scale the task set.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE:
The task runningCount is equal to the computedDesiredCount.
The pendingCount is 0.
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING.
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used when a service uses the CODE_DEPLOY deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON-The daemon scheduling strategy deploys exactly one task on each container instance in your cluster. When you are using this strategy, do not specify a desired number of tasks or any task placement strategies.
deploymentController (dict) --
The deployment controller type the service is using.
type (string) --
The deployment controller type to use.
There are two deployment controller types available:
ECS
The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.
CODE_DEPLOY
The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
{'service': {'deploymentController': {'type': 'ECS | CODE_DEPLOY'},
'taskSets': [{'computedDesiredCount': 'integer',
'createdAt': 'timestamp',
'externalId': 'string',
'id': 'string',
'launchType': 'EC2 | FARGATE',
'loadBalancers': [{'containerName': 'string',
'containerPort': 'integer',
'loadBalancerName': 'string',
'targetGroupArn': 'string'}],
'networkConfiguration': {'awsvpcConfiguration': {'assignPublicIp': 'ENABLED '
'| '
'DISABLED',
'securityGroups': ['string'],
'subnets': ['string']}},
'pendingCount': 'integer',
'platformVersion': 'string',
'runningCount': 'integer',
'scale': {'unit': 'PERCENT', 'value': 'double'},
'stabilityStatus': 'STEADY_STATE | STABILIZING',
'stabilityStatusAt': 'timestamp',
'startedBy': 'string',
'status': 'string',
'taskDefinition': 'string',
'taskSetArn': 'string',
'updatedAt': 'timestamp'}]}}
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
See also: AWS API Documentation
Request Syntax
client.delete_service(
cluster='string',
service='string',
force=True|False
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service to delete. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to delete.
boolean
If true, allows you to delete a service even if it has not been scaled down to zero tasks. It is only necessary to use this if the service is using the REPLICA scheduling strategy.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1)
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of the deleted service.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Amazon Route 53 Auto Naming. For more information, see Service.
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
startedBy (string) --
The tag specified when a task set is started. If the task is started by an AWS CodeDeploy deployment, then the startedBy parameter is CODE_DEPLOY.
externalId (string) --
The deployment ID of the AWS CodeDeploy deployment.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time, or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the service.
value (float) --
The value, specified as a percent total of a service's desiredCount, to scale the task set.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE:
The task runningCount is equal to the computedDesiredCount.
The pendingCount is 0.
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING.
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used when a service uses the CODE_DEPLOY deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON-The daemon scheduling strategy deploys exactly one task on each container instance in your cluster. When you are using this strategy, do not specify a desired number of tasks or any task placement strategies.
deploymentController (dict) --
The deployment controller type the service is using.
type (string) --
The deployment controller type to use.
There are two deployment controller types available:
ECS
The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.
CODE_DEPLOY
The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
{'services': {'deploymentController': {'type': 'ECS | CODE_DEPLOY'},
'taskSets': [{'computedDesiredCount': 'integer',
'createdAt': 'timestamp',
'externalId': 'string',
'id': 'string',
'launchType': 'EC2 | FARGATE',
'loadBalancers': [{'containerName': 'string',
'containerPort': 'integer',
'loadBalancerName': 'string',
'targetGroupArn': 'string'}],
'networkConfiguration': {'awsvpcConfiguration': {'assignPublicIp': 'ENABLED '
'| '
'DISABLED',
'securityGroups': ['string'],
'subnets': ['string']}},
'pendingCount': 'integer',
'platformVersion': 'string',
'runningCount': 'integer',
'scale': {'unit': 'PERCENT', 'value': 'double'},
'stabilityStatus': 'STEADY_STATE | STABILIZING',
'stabilityStatusAt': 'timestamp',
'startedBy': 'string',
'status': 'string',
'taskDefinition': 'string',
'taskSetArn': 'string',
'updatedAt': 'timestamp'}]}}
Describes the specified services running in your cluster.
See also: AWS API Documentation
Request Syntax
client.describe_services(
cluster='string',
services=[
'string',
],
include=[
'TAGS',
]
)
string
The short name or full Amazon Resource Name (ARN)the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed.
list
[REQUIRED]
A list of services to describe. You may specify up to 10 services to describe in a single operation.
(string) --
list
Specifies whether you want to see the resource tags for the service. If TAGS is specified, the tags are included in the response. If this field is omitted, tags are not included in the response.
(string) --
dict
Response Syntax
{
'services': [
{
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1)
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
services (list) --
The list of services described.
(dict) --
Details on a service within a cluster
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Amazon Route 53 Auto Naming. For more information, see Service.
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
startedBy (string) --
The tag specified when a task set is started. If the task is started by an AWS CodeDeploy deployment, then the startedBy parameter is CODE_DEPLOY.
externalId (string) --
The deployment ID of the AWS CodeDeploy deployment.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time, or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the service.
value (float) --
The value, specified as a percent total of a service's desiredCount, to scale the task set.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE:
The task runningCount is equal to the computedDesiredCount.
The pendingCount is 0.
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING.
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used when a service uses the CODE_DEPLOY deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON-The daemon scheduling strategy deploys exactly one task on each container instance in your cluster. When you are using this strategy, do not specify a desired number of tasks or any task placement strategies.
deploymentController (dict) --
The deployment controller type the service is using.
type (string) --
The deployment controller type to use.
There are two deployment controller types available:
ECS
The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.
CODE_DEPLOY
The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'service': {'deploymentController': {'type': 'ECS | CODE_DEPLOY'},
'taskSets': [{'computedDesiredCount': 'integer',
'createdAt': 'timestamp',
'externalId': 'string',
'id': 'string',
'launchType': 'EC2 | FARGATE',
'loadBalancers': [{'containerName': 'string',
'containerPort': 'integer',
'loadBalancerName': 'string',
'targetGroupArn': 'string'}],
'networkConfiguration': {'awsvpcConfiguration': {'assignPublicIp': 'ENABLED '
'| '
'DISABLED',
'securityGroups': ['string'],
'subnets': ['string']}},
'pendingCount': 'integer',
'platformVersion': 'string',
'runningCount': 'integer',
'scale': {'unit': 'PERCENT', 'value': 'double'},
'stabilityStatus': 'STEADY_STATE | STABILIZING',
'stabilityStatusAt': 'timestamp',
'startedBy': 'string',
'status': 'string',
'taskDefinition': 'string',
'taskSetArn': 'string',
'updatedAt': 'timestamp'}]}}
Modifies the parameters of a service.
For services using the rolling update ( ECS) deployment controller, the desired count, deployment configuration, network configuration, or task definition used can be updated.
For services using the blue/green ( CODE_DEPLOY) deployment controller, only the desired count, deployment configuration, and health check grace period can be updated using this API. If the network configuration, platform version, or task definition need to be updated, a new AWS CodeDeploy deployment should be created. For more information, see CreateDeployment in the AWS CodeDeploy API Reference.
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.
If you have updated the Docker image of your application, you can create a new task definition with that image and deploy it to your service. The service scheduler uses the minimum healthy percent and maximum percent parameters (in the service's deployment configuration) to determine the deployment strategy.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during a deployment, which enables you to define the deployment batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after which SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.update_service(
cluster='string',
service='string',
desiredCount=123,
taskDefinition='string',
deploymentConfiguration={
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
platformVersion='string',
forceNewDeployment=True|False,
healthCheckGracePeriodSeconds=123
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that your service is running on. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to update.
integer
The number of instantiations of the task to place and keep running in your service.
string
The family and revision ( family:revision) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used. If you modify the task definition with UpdateService, Amazon ECS spawns a task with the new version of the task definition and then stops an old task after the new version is running.
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
dict
The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own elastic network interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
string
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
boolean
Whether to force a new deployment of the service. Deployments are not forced by default. You can use this option to trigger a new deployment with no service definition changes. For example, you can update a service's tasks to use a newer Docker image with the same image/tag combination ( my_image:latest) or to roll Fargate tasks onto a newer platform version.
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to Elastic Load Balancing health checks, you can specify a health check grace period of up to 1,800 seconds. During that time, the ECS service scheduler ignores the Elastic Load Balancing health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'serviceRegistries': [
{
'registryArn': 'string',
'port': 123,
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'taskSets': [
{
'id': 'string',
'taskSetArn': 'string',
'startedBy': 'string',
'externalId': 'string',
'status': 'string',
'taskDefinition': 'string',
'computedDesiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'scale': {
'value': 123.0,
'unit': 'PERCENT'
},
'stabilityStatus': 'STEADY_STATE'|'STABILIZING',
'stabilityStatusAt': datetime(2015, 1, 1)
},
],
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123,
'schedulingStrategy': 'REPLICA'|'DAEMON',
'deploymentController': {
'type': 'ECS'|'CODE_DEPLOY'
},
'tags': [
{
'key': 'string',
'value': 'string'
},
],
'createdBy': 'string',
'enableECSManagedTags': True|False,
'propagateTags': 'TASK_DEFINITION'|'SERVICE'
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the update call.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the Region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a Region or across multiple Regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
serviceRegistries (list) --
(dict) --
Details of the service registry.
registryArn (string) --
The Amazon Resource Name (ARN) of the service registry. The currently supported service registry is Amazon Route 53 Auto Naming. For more information, see Service.
port (integer) --
The port value used if your service discovery service specified an SRV record. This field may be used if both the awsvpc network mode and SRV records are used.
containerName (string) --
The container name value, already specified in the task definition, to be used for your service discovery service. If the task definition that your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition that your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
containerPort (integer) --
The port value, already specified in the task definition, to be used for your service discovery service. If the task definition your service task specifies uses the bridge or host network mode, you must specify a containerName and containerPort combination from the task definition. If the task definition your service task specifies uses the awsvpc network mode and a type SRV DNS record is used, you must specify either a containerName and containerPort combination or a port value, but not both.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the maximum percent parameter represents an upper limit on the number of tasks in a service that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desired number of tasks (rounded down to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to define the deployment batch size. For example, if your service has a desired number of four tasks and a maximum percent value of 200%, the scheduler may start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximum percent is 200%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the maximum percent value is set to the default value and is used to define the upper limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the maximum percent value is not used, although it is returned when describing your service.
minimumHealthyPercent (integer) --
If a service is using the rolling update ( ECS) deployment type, the minimum healthy percent represents a lower limit on the number of tasks in a service that must remain in the RUNNING state during a deployment, as a percentage of the desired number of tasks (rounded up to the nearest integer), and while any container instances are in the DRAINING state if the service contains tasks using the EC2 launch type. This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desired number of four tasks and a minimum healthy percent of 50%, the scheduler may stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state; tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and they are reported as healthy by the load balancer. The default value for minimum healthy percent is 100%.
If a service is using the blue/green ( CODE_DEPLOY) deployment type and tasks that use the EC2 launch type, the minimum healthy percent value is set to the default value and is used to define the lower limit on the number of the tasks in the service that remain in the RUNNING state while the container instances are in the DRAINING state. If the tasks in the service use the Fargate launch type, the minimum healthy percent value is not used, although it is returned when describing your service.
taskSets (list) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
(dict) --
Information about a set of Amazon ECS tasks in an AWS CodeDeploy deployment. An Amazon ECS task set includes details such as the desired number of tasks, how many tasks are running, and whether the task set serves production traffic.
id (string) --
The ID of the task set.
taskSetArn (string) --
The Amazon Resource Name (ARN) of the task set.
startedBy (string) --
The tag specified when a task set is started. If the task is started by an AWS CodeDeploy deployment, then the startedBy parameter is CODE_DEPLOY.
externalId (string) --
The deployment ID of the AWS CodeDeploy deployment.
status (string) --
The status of the task set. The following describes each state:
PRIMARY
The task set is serving production traffic.
ACTIVE
The task set is not serving production traffic.
DRAINING
The tasks in the task set are being stopped and their corresponding targets are being deregistered from their target group.
taskDefinition (string) --
The task definition the task set is using.
computedDesiredCount (integer) --
The computed desired count for the task set. This is calculated by multiplying the service's desiredCount by the task set's scale percentage.
pendingCount (integer) --
The number of tasks in the task set that are in the PENDING status during a deployment. A task in the PENDING state is preparing to enter the RUNNING state. A task set enters the PENDING status when it launches for the first time, or when it is restarted after being in the STOPPED state.
runningCount (integer) --
The number of tasks in the task set that are in the RUNNING status during a deployment. A task in the RUNNING state is running and ready for use.
createdAt (datetime) --
The Unix timestamp for when the task set was created.
updatedAt (datetime) --
The Unix timestamp for when the task set was last updated.
launchType (string) --
The launch type the tasks in the task set are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which the tasks in the task set are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The network configuration for the task set.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
loadBalancers (list) --
Details on a load balancer that is used with a task set.
(dict) --
Details on a load balancer that is used with a service.
If the service is using the ECS deployment controller, you are limited to one load balancer or target group.
If the service is using the CODE_DEPLOY deployment controller, the service is required to use either an Application Load Balancer or Network Load Balancer. When you are creating an AWS CodeDeploy deployment group, you specify two target groups (referred to as a targetGroupPair). Each target group binds to a separate task set in the deployment. The load balancer can also have up to two listeners, a required listener for production traffic and an optional listener that allows you to test new revisions of the service before routing production traffic to it.
Services with tasks that use the awsvpc network mode (for example, those with the Fargate launch type) only support Application Load Balancers and Network Load Balancers. Classic Load Balancers are not supported. Also, when you create any target groups for these services, you must choose ip as the target type, not instance. Tasks that use the awsvpc network mode are associated with an elastic network interface, not an Amazon EC2 instance.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group or groups associated with a service. For services using the ECS deployment controller, you are limited to one target group. For services using the CODE_DEPLOY deployment controller, you are required to define two target groups for the load balancer.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
scale (dict) --
A floating-point percentage of the desired number of tasks to place and keep running in the service.
value (float) --
The value, specified as a percent total of a service's desiredCount, to scale the task set.
unit (string) --
The unit of measure for the scale value.
stabilityStatus (string) --
The stability status, which indicates whether the task set has reached a steady state. If the following conditions are met, the task set will be in STEADY_STATE:
The task runningCount is equal to the computedDesiredCount.
The pendingCount is 0.
There are no tasks running on container instances in the DRAINING status.
All tasks are reporting a healthy status from the load balancers, service discovery, and container health checks.
If any of those conditions are not met, the stability status returns STABILIZING.
stabilityStatusAt (datetime) --
The Unix timestamp for when the task set stability status was retrieved.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment. This is used when a service uses the CODE_DEPLOY deployment controller type.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. The following describes each state:
PRIMARY
The most recent deployment of a service.
ACTIVE
A service deployment that still has running tasks, but are in the process of being replaced with a new PRIMARY deployment.
INACTIVE
A deployment that has been completely replaced.
taskDefinition (string) --
The most recent task definition that was specified for the tasks in the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix timestamp for when the service deployment was created.
updatedAt (datetime) --
The Unix timestamp for when the service deployment was last updated.
launchType (string) --
The launch type the tasks in the service are using. For more information, see Amazon ECS Launch Types in the Amazon Elastic Container Service Developer Guide.
platformVersion (string) --
The platform version on which your tasks in the service are running. A platform version is only specified for tasks using the Fargate launch type. If one is not specified, the LATEST platform version is used by default. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix timestamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix timestamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. You cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own elastic network interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service. There is a limit of 16 subnets able to be specified per AwsVpcConfiguration.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used. There is a limit of five security groups able to be specified per AwsVpcConfiguration.
(string) --
assignPublicIp (string) --
Whether the task's elastic network interface receives a public IP address. The default value is DISABLED.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
schedulingStrategy (string) --
The scheduling strategy to use for the service. For more information, see Services.
There are two service scheduler strategies available:
REPLICA-The replica scheduling strategy places and maintains the desired number of tasks across your cluster. By default, the service scheduler spreads tasks across Availability Zones. You can use task placement strategies and constraints to customize task placement decisions.
DAEMON-The daemon scheduling strategy deploys exactly one task on each container instance in your cluster. When you are using this strategy, do not specify a desired number of tasks or any task placement strategies.
deploymentController (dict) --
The deployment controller type the service is using.
type (string) --
The deployment controller type to use.
There are two deployment controller types available:
ECS
The rolling update ( ECS) deployment type involves replacing the current running version of the container with the latest version. The number of containers Amazon ECS adds or removes from the service during a rolling update is controlled by adjusting the minimum and maximum number of healthy tasks allowed during a service deployment, as specified in the DeploymentConfiguration.
CODE_DEPLOY
The blue/green ( CODE_DEPLOY) deployment type uses the blue/green deployment model powered by AWS CodeDeploy, which allows you to verify a new deployment of a service before sending production traffic to it. For more information, see Amazon ECS Deployment Types in the Amazon Elastic Container Service Developer Guide.
tags (list) --
The metadata that you apply to the service to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
(dict) --
The metadata that you apply to a resource to help you categorize and organize them. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.
key (string) --
One part of a key-value pair that make up a tag. A key is a general label that acts like a category for more specific tag values.
value (string) --
The optional part of a key-value pair that make up a tag. A value acts as a descriptor within a tag category (key).
createdBy (string) --
The principal that created the service.
enableECSManagedTags (boolean) --
Specifies whether to enable Amazon ECS managed tags for the tasks in the service. For more information, see Tagging Your Amazon ECS Resources in the Amazon Elastic Container Service Developer Guide.
propagateTags (string) --
Specifies whether to propagate the tags from the task definition or the service to the task. If no value is specified, the tags are not propagated.