2017/12/22 - Amazon EC2 Container Service - 4 updated api methods
Changes Update ecs client to latest version
{'healthCheckGracePeriodSeconds': 'integer'}
Response {'service': {'healthCheckGracePeriodSeconds': 'integer'}}
Runs and maintains a desired number of tasks from a specified task definition. If the number of tasks running in a service drops below desiredCount, Amazon ECS spawns another copy of the task in the specified cluster. To update an existing service, see UpdateService.
In addition to maintaining the desired count of tasks in your service, you can optionally run your service behind a load balancer. The load balancer distributes traffic across the tasks that are associated with the service. For more information, see Service Load Balancing in the Amazon Elastic Container Service Developer Guide.
You can optionally specify a deployment configuration for your service. During a deployment, the service scheduler uses the minimumHealthyPercent and maximumPercent parameters to determine the deployment strategy. The deployment is triggered by changing the task definition or the desired count of a service with an UpdateService operation.
The minimumHealthyPercent represents a lower limit on the number of your service's tasks that must remain in the RUNNING state during a deployment, as a percentage of the desiredCount (rounded up to the nearest integer). This parameter enables you to deploy without using additional cluster capacity. For example, if your service has a desiredCount of four tasks and a minimumHealthyPercent of 50%, the scheduler can stop two existing tasks to free up cluster capacity before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that do use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer. The default value for minimumHealthyPercent is 50% in the console and 100% for the AWS CLI, the AWS SDKs, and the APIs.
The maximumPercent parameter represents an upper limit on the number of your service's tasks that are allowed in the RUNNING or PENDING state during a deployment, as a percentage of the desiredCount (rounded down to the nearest integer). This parameter enables you to define the deployment batch size. For example, if your service has a desiredCount of four tasks and a maximumPercent value of 200%, the scheduler can start four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available). The default value for maximumPercent is 200%.
When the service scheduler launches new tasks, it determines task placement in your cluster using the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy) with the placementStrategy parameter):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.create_service(
cluster='string',
serviceName='string',
taskDefinition='string',
loadBalancers=[
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
desiredCount=123,
clientToken='string',
launchType='EC2'|'FARGATE',
platformVersion='string',
role='string',
deploymentConfiguration={
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
placementConstraints=[
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
placementStrategy=[
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
healthCheckGracePeriodSeconds=123
)
string
The short name or full Amazon Resource Name (ARN) of the cluster on which to run your service. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
string
[REQUIRED]
The family and revision ( family:revision) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used.
list
A load balancer object representing the load balancer to use with your service. Currently, you are limited to one load balancer or target group per service. After you create a service, the load balancer name or target group ARN, container name, and container port specified in the service definition are immutable.
For Classic Load Balancers, this object must contain the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer. When a task from this service is placed on a container instance, the container instance is registered with the load balancer specified here.
For Application Load Balancers and Network Load Balancers, this object must contain the load balancer target group ARN, the container name (as it appears in a container definition), and the container port to access from the load balancer. When a task from this service is placed on a container instance, the container instance and port combination is registered as a target in the target group specified here.
(dict) --
Details on a load balancer that is used with a service.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group associated with a service.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
integer
[REQUIRED]
The number of instantiations of the specified task definition to place and keep running on your cluster.
string
Unique, case-sensitive identifier you provide to ensure the idempotency of the request. Up to 32 ASCII characters are allowed.
string
The launch type on which to run your service.
string
The platform version on which to run your service. If one is not specified, the latest version is used by default.
string
The name or full Amazon Resource Name (ARN) of the IAM role that allows Amazon ECS to make calls to your load balancer on your behalf. This parameter is only permitted if you are using a load balancer with your service and your task definition does not use the awsvpc network mode. If you specify the role parameter, you must also specify a load balancer object with the loadBalancers parameter.
If your specified role has a path other than /, then you must either specify the full role ARN (this is recommended) or prefix the role name with the path. For example, if a role with the name bar has a path of /foo/ then you would specify /foo/bar as the role name. For more information, see Friendly Names and Paths in the IAM User Guide.
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
list
An array of placement constraint objects to use for tasks in your service. You can specify a maximum of 10 constraints per task (this limit includes constraints in the task definition and those specified at run time).
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
list
The placement strategy objects to use for tasks in your service. You can specify a maximum of five strategy rules per service.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
dict
The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own Elastic Network Interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to ELB health checks, you can specify a health check grace period of up to 1,800 seconds during which the ECS service scheduler will ignore ELB health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the create call.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
Details on a load balancer that is used with a service.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group associated with a service.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your task is running. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
taskDefinition (string) --
The most recent task definition that was specified for the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix time stamp for when the service was created.
updatedAt (datetime) --
The Unix time stamp for when the service was last updated.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your service is running.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix time stamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix time stamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
{'service': {'healthCheckGracePeriodSeconds': 'integer'}}
Deletes a specified service within a cluster. You can delete a service if you have no running tasks in it and the desired task count is zero. If the service is actively maintaining tasks, you cannot delete it, and you must update the service to a desired task count of zero. For more information, see UpdateService.
See also: AWS API Documentation
Request Syntax
client.delete_service(
cluster='string',
service='string'
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that hosts the service to delete. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to delete.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123
}
}
Response Structure
(dict) --
service (dict) --
The full description of the deleted service.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
Details on a load balancer that is used with a service.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group associated with a service.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your task is running. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
taskDefinition (string) --
The most recent task definition that was specified for the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix time stamp for when the service was created.
updatedAt (datetime) --
The Unix time stamp for when the service was last updated.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your service is running.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix time stamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix time stamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
{'services': {'healthCheckGracePeriodSeconds': 'integer'}}
Describes the specified services running in your cluster.
See also: AWS API Documentation
Request Syntax
client.describe_services(
cluster='string',
services=[
'string',
]
)
string
The short name or full Amazon Resource Name (ARN)the cluster that hosts the service to describe. If you do not specify a cluster, the default cluster is assumed.
list
[REQUIRED]
A list of services to describe. You may specify up to 10 services to describe in a single operation.
(string) --
dict
Response Syntax
{
'services': [
{
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123
},
],
'failures': [
{
'arn': 'string',
'reason': 'string'
},
]
}
Response Structure
(dict) --
services (list) --
The list of services described.
(dict) --
Details on a service within a cluster
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
Details on a load balancer that is used with a service.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group associated with a service.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your task is running. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
taskDefinition (string) --
The most recent task definition that was specified for the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix time stamp for when the service was created.
updatedAt (datetime) --
The Unix time stamp for when the service was last updated.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your service is running.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix time stamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix time stamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.
failures (list) --
Any failures associated with the call.
(dict) --
A failed resource.
arn (string) --
The Amazon Resource Name (ARN) of the failed resource.
reason (string) --
The reason for the failure.
{'healthCheckGracePeriodSeconds': 'integer'}
Response {'service': {'healthCheckGracePeriodSeconds': 'integer'}}
Modifies the desired count, deployment configuration, network configuration, or task definition used in a service.
You can add to or subtract from the number of instantiations of a task definition in a service by specifying the cluster that the service is running in and a new desiredCount parameter.
You can use UpdateService to modify your task definition and deploy a new version of your service.
You can also update the deployment configuration of a service. When a deployment is triggered by updating the task definition of a service, the service scheduler uses the deployment configuration parameters, minimumHealthyPercent and maximumPercent, to determine the deployment strategy.
If minimumHealthyPercent is below 100%, the scheduler can ignore desiredCount temporarily during a deployment. For example, if desiredCount is four tasks, a minimum of 50% allows the scheduler to stop two existing tasks before starting two new tasks. Tasks for services that do not use a load balancer are considered healthy if they are in the RUNNING state. Tasks for services that use a load balancer are considered healthy if they are in the RUNNING state and the container instance they are hosted on is reported as healthy by the load balancer.
The maximumPercent parameter represents an upper limit on the number of running tasks during a deployment, which enables you to define the deployment batch size. For example, if desiredCount is four tasks, a maximum of 200% starts four new tasks before stopping the four older tasks (provided that the cluster resources required to do this are available).
When UpdateService stops a task during a deployment, the equivalent of docker stop is issued to the containers running in the task. This results in a SIGTERM and a 30-second timeout, after which SIGKILL is sent and the containers are forcibly stopped. If the container handles the SIGTERM gracefully and exits within 30 seconds from receiving it, no SIGKILL is sent.
When the service scheduler launches new tasks, it determines task placement in your cluster with the following logic:
Determine which of the container instances in your cluster can support your service's task definition (for example, they have the required CPU, memory, ports, and container instance attributes).
By default, the service scheduler attempts to balance tasks across Availability Zones in this manner (although you can choose a different placement strategy):
Sort the valid container instances by the fewest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have zero, valid container instances in either zone B or C are considered optimal for placement.
Place the new service task on a valid container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the fewest number of running tasks for this service.
When the service scheduler stops running tasks, it attempts to maintain balance across the Availability Zones in your cluster using the following logic:
Sort the container instances by the largest number of running tasks for this service in the same Availability Zone as the instance. For example, if zone A has one running service task and zones B and C each have two, container instances in either zone B or C are considered optimal for termination.
Stop the task on a container instance in an optimal Availability Zone (based on the previous steps), favoring container instances with the largest number of running tasks for this service.
See also: AWS API Documentation
Request Syntax
client.update_service(
cluster='string',
service='string',
desiredCount=123,
taskDefinition='string',
deploymentConfiguration={
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
networkConfiguration={
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
platformVersion='string',
forceNewDeployment=True|False,
healthCheckGracePeriodSeconds=123
)
string
The short name or full Amazon Resource Name (ARN) of the cluster that your service is running on. If you do not specify a cluster, the default cluster is assumed.
string
[REQUIRED]
The name of the service to update.
integer
The number of instantiations of the task to place and keep running in your service.
string
The family and revision ( family:revision) or full ARN of the task definition to run in your service. If a revision is not specified, the latest ACTIVE revision is used. If you modify the task definition with UpdateService, Amazon ECS spawns a task with the new version of the task definition and then stops an old task after the new version is running.
dict
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
dict
The network configuration for the service. This parameter is required for task definitions that use the awsvpc network mode to receive their own Elastic Network Interface, and it is not supported for other network modes. For more information, see Task Networking in the Amazon Elastic Container Service Developer Guide.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) -- [REQUIRED]
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
string
The platform version you want to update your service to run.
boolean
Whether or not to force a new deployment of the service.
integer
The period of time, in seconds, that the Amazon ECS service scheduler should ignore unhealthy Elastic Load Balancing target health checks after a task has first started. This is only valid if your service is configured to use a load balancer. If your service's tasks take a while to start and respond to ELB health checks, you can specify a health check grace period of up to 1,800 seconds during which the ECS service scheduler will ignore ELB health check status. This grace period can prevent the ECS service scheduler from marking tasks as unhealthy and stopping them before they have time to come up.
dict
Response Syntax
{
'service': {
'serviceArn': 'string',
'serviceName': 'string',
'clusterArn': 'string',
'loadBalancers': [
{
'targetGroupArn': 'string',
'loadBalancerName': 'string',
'containerName': 'string',
'containerPort': 123
},
],
'status': 'string',
'desiredCount': 123,
'runningCount': 123,
'pendingCount': 123,
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'taskDefinition': 'string',
'deploymentConfiguration': {
'maximumPercent': 123,
'minimumHealthyPercent': 123
},
'deployments': [
{
'id': 'string',
'status': 'string',
'taskDefinition': 'string',
'desiredCount': 123,
'pendingCount': 123,
'runningCount': 123,
'createdAt': datetime(2015, 1, 1),
'updatedAt': datetime(2015, 1, 1),
'launchType': 'EC2'|'FARGATE',
'platformVersion': 'string',
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
}
},
],
'roleArn': 'string',
'events': [
{
'id': 'string',
'createdAt': datetime(2015, 1, 1),
'message': 'string'
},
],
'createdAt': datetime(2015, 1, 1),
'placementConstraints': [
{
'type': 'distinctInstance'|'memberOf',
'expression': 'string'
},
],
'placementStrategy': [
{
'type': 'random'|'spread'|'binpack',
'field': 'string'
},
],
'networkConfiguration': {
'awsvpcConfiguration': {
'subnets': [
'string',
],
'securityGroups': [
'string',
],
'assignPublicIp': 'ENABLED'|'DISABLED'
}
},
'healthCheckGracePeriodSeconds': 123
}
}
Response Structure
(dict) --
service (dict) --
The full description of your service following the update call.
serviceArn (string) --
The ARN that identifies the service. The ARN contains the arn:aws:ecs namespace, followed by the region of the service, the AWS account ID of the service owner, the service namespace, and then the service name. For example, ``arn:aws:ecs:region:012345678910:service/my-service ``.
serviceName (string) --
The name of your service. Up to 255 letters (uppercase and lowercase), numbers, hyphens, and underscores are allowed. Service names must be unique within a cluster, but you can have similarly named services in multiple clusters within a region or across multiple regions.
clusterArn (string) --
The Amazon Resource Name (ARN) of the cluster that hosts the service.
loadBalancers (list) --
A list of Elastic Load Balancing load balancer objects, containing the load balancer name, the container name (as it appears in a container definition), and the container port to access from the load balancer.
(dict) --
Details on a load balancer that is used with a service.
targetGroupArn (string) --
The full Amazon Resource Name (ARN) of the Elastic Load Balancing target group associated with a service.
loadBalancerName (string) --
The name of a load balancer.
containerName (string) --
The name of the container (as it appears in a container definition) to associate with the load balancer.
containerPort (integer) --
The port on the container to associate with the load balancer. This port must correspond to a containerPort in the service's task definition. Your container instances must allow ingress traffic on the hostPort of the port mapping.
status (string) --
The status of the service. The valid values are ACTIVE, DRAINING, or INACTIVE.
desiredCount (integer) --
The desired number of instantiations of the task definition to keep running on the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
runningCount (integer) --
The number of tasks in the cluster that are in the RUNNING state.
pendingCount (integer) --
The number of tasks in the cluster that are in the PENDING state.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your task is running. For more information, see AWS Fargate Platform Versions in the Amazon Elastic Container Service Developer Guide.
taskDefinition (string) --
The task definition to use for tasks in the service. This value is specified when the service is created with CreateService, and it can be modified with UpdateService.
deploymentConfiguration (dict) --
Optional deployment parameters that control how many tasks run during the deployment and the ordering of stopping and starting tasks.
maximumPercent (integer) --
The upper limit (as a percentage of the service's desiredCount) of the number of tasks that are allowed in the RUNNING or PENDING state in a service during a deployment. The maximum number of tasks during a deployment is the desiredCount multiplied by maximumPercent/100, rounded down to the nearest integer value.
minimumHealthyPercent (integer) --
The lower limit (as a percentage of the service's desiredCount) of the number of running tasks that must remain in the RUNNING state in a service during a deployment. The minimum number of healthy tasks during a deployment is the desiredCount multiplied by minimumHealthyPercent/100, rounded up to the nearest integer value.
deployments (list) --
The current state of deployments for the service.
(dict) --
The details of an Amazon ECS service deployment.
id (string) --
The ID of the deployment.
status (string) --
The status of the deployment. Valid values are PRIMARY (for the most recent deployment), ACTIVE (for previous deployments that still have tasks running, but are being replaced with the PRIMARY deployment), and INACTIVE (for deployments that have been completely replaced).
taskDefinition (string) --
The most recent task definition that was specified for the service to use.
desiredCount (integer) --
The most recent desired count of tasks that was specified for the service to deploy or maintain.
pendingCount (integer) --
The number of tasks in the deployment that are in the PENDING status.
runningCount (integer) --
The number of tasks in the deployment that are in the RUNNING status.
createdAt (datetime) --
The Unix time stamp for when the service was created.
updatedAt (datetime) --
The Unix time stamp for when the service was last updated.
launchType (string) --
The launch type on which your service is running.
platformVersion (string) --
The platform version on which your service is running.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
roleArn (string) --
The ARN of the IAM role associated with the service that allows the Amazon ECS container agent to register container instances with an Elastic Load Balancing load balancer.
events (list) --
The event stream for your service. A maximum of 100 of the latest events are displayed.
(dict) --
Details on an event associated with a service.
id (string) --
The ID string of the event.
createdAt (datetime) --
The Unix time stamp for when the event was triggered.
message (string) --
The event message.
createdAt (datetime) --
The Unix time stamp for when the service was created.
placementConstraints (list) --
The placement constraints for the tasks in the service.
(dict) --
An object representing a constraint on task placement. For more information, see Task Placement Constraints in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of constraint. Use distinctInstance to ensure that each task in a particular group is running on a different container instance. Use memberOf to restrict the selection to a group of valid candidates. The value distinctInstance is not supported in task definitions.
expression (string) --
A cluster query language expression to apply to the constraint. Note you cannot specify an expression if the constraint type is distinctInstance. For more information, see Cluster Query Language in the Amazon Elastic Container Service Developer Guide.
placementStrategy (list) --
The placement strategy that determines how tasks for the service are placed.
(dict) --
The task placement strategy for a task or service. For more information, see Task Placement Strategies in the Amazon Elastic Container Service Developer Guide.
type (string) --
The type of placement strategy. The random placement strategy randomly places tasks on available candidates. The spread placement strategy spreads placement across available candidates evenly based on the field parameter. The binpack strategy places tasks on available candidates that have the least available amount of the resource that is specified with the field parameter. For example, if you binpack on memory, a task is placed on the instance with the least amount of remaining memory (but still enough to run the task).
field (string) --
The field to apply the placement strategy against. For the spread placement strategy, valid values are instanceId (or host, which has the same effect), or any platform or custom attribute that is applied to a container instance, such as attribute:ecs.availability-zone. For the binpack placement strategy, valid values are cpu and memory. For the random placement strategy, this field is not used.
networkConfiguration (dict) --
The VPC subnet and security group configuration for tasks that receive their own Elastic Network Interface by using the awsvpc networking mode.
awsvpcConfiguration (dict) --
The VPC subnets and security groups associated with a task.
subnets (list) --
The subnets associated with the task or service.
(string) --
securityGroups (list) --
The security groups associated with the task or service. If you do not specify a security group, the default security group for the VPC is used.
(string) --
assignPublicIp (string) --
Specifies whether or not the task's elastic network interface receives a public IP address.
healthCheckGracePeriodSeconds (integer) --
The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started.