2024/04/05 - AWS Resource Groups - 2 updated api methods
Changes Added a new QueryErrorCode RESOURCE_TYPE_NOT_SUPPORTED that is returned by the ListGroupResources operation if the group query contains unsupported resource types.
{'QueryErrors': {'ErrorCode': {'RESOURCE_TYPE_NOT_SUPPORTED'}}}
Returns a list of ARNs of the resources that are members of a specified resource group.
Minimum permissions
To run this command, you must have the following permissions:
resource-groups:ListGroupResources
cloudformation:DescribeStacks
cloudformation:ListStackResources
tag:GetResources
See also: AWS API Documentation
Request Syntax
client.list_group_resources(
GroupName='string',
Group='string',
Filters=[
{
'Name': 'resource-type',
'Values': [
'string',
]
},
],
MaxResults=123,
NextToken='string'
)
string
Warning
Deprecated - don't use this parameter. Use the Group request field instead.
string
The name or the ARN of the resource group
list
Filters, formatted as ResourceFilter objects, that you want to apply to a ListGroupResources operation. Filters the results to include only those of the specified resource types.
resource-type - Filter resources by their type. Specify up to five resource types in the format AWS::ServiceCode::ResourceType . For example, AWS::EC2::Instance , or AWS::S3::Bucket .
When you specify a resource-type filter for ListGroupResources , Resource Groups validates your filter resource types against the types that are defined in the query associated with the group. For example, if a group contains only S3 buckets because its query specifies only that resource type, but your resource-type filter includes EC2 instances, AWS Resource Groups does not filter for EC2 instances. In this case, a ListGroupResources request returns a BadRequestException error with a message similar to the following:
The resource types specified as filters in the request are not valid.
The error includes a list of resource types that failed the validation because they are not part of the query associated with the group. This validation doesn't occur when the group query specifies AWS::AllSupported , because a group based on such a query can contain any of the allowed resource types for the query type (tag-based or Amazon CloudFront stack-based queries).
(dict) --
A filter name and value pair that is used to obtain more specific results from a list of resources.
Name (string) -- [REQUIRED]
The name of the filter. Filter names are case-sensitive.
Values (list) -- [REQUIRED]
One or more filter values. Allowed filter values vary by resource filter name, and are case-sensitive.
(string) --
integer
The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the NextToken response element is present and has a value (is not null). Include that value as the NextToken request parameter in the next call to the operation to get the next part of the results. Note that the service might return fewer results than the maximum even when there are more results available. You should check NextToken after every operation to ensure that you receive all of the results.
string
The parameter for receiving additional results if you receive a NextToken response in a previous request. A NextToken response indicates that more output is available. Set this parameter to the value provided by a previous call's NextToken response to indicate where the output should continue from.
dict
Response Syntax
{
'Resources': [
{
'Identifier': {
'ResourceArn': 'string',
'ResourceType': 'string'
},
'Status': {
'Name': 'PENDING'
}
},
],
'ResourceIdentifiers': [
{
'ResourceArn': 'string',
'ResourceType': 'string'
},
],
'NextToken': 'string',
'QueryErrors': [
{
'ErrorCode': 'CLOUDFORMATION_STACK_INACTIVE'|'CLOUDFORMATION_STACK_NOT_EXISTING'|'CLOUDFORMATION_STACK_UNASSUMABLE_ROLE'|'RESOURCE_TYPE_NOT_SUPPORTED',
'Message': 'string'
},
]
}
Response Structure
(dict) --
Resources (list) --
An array of resources from which you can determine each resource's identity, type, and group membership status.
(dict) --
A structure returned by the ListGroupResources operation that contains identity and group membership status information for one of the resources in the group.
Identifier (dict) --
A structure that contains the ARN of a resource and its resource type.
ResourceArn (string) --
The ARN of a resource.
ResourceType (string) --
The resource type of a resource, such as AWS::EC2::Instance .
Status (dict) --
A structure that contains the status of this resource's membership in the group.
Note
This field is present in the response only if the group is of type AWS::EC2::HostManagement .
Name (string) --
The current status.
ResourceIdentifiers (list) --
Warning
Deprecated - don't use this parameter. Use the Resources response field instead.
(dict) --
A structure that contains the ARN of a resource and its resource type.
ResourceArn (string) --
The ARN of a resource.
ResourceType (string) --
The resource type of a resource, such as AWS::EC2::Instance .
NextToken (string) --
If present, indicates that more output is available than is included in the current response. Use this value in the NextToken request parameter in a subsequent call to the operation to get the next part of the output. You should repeat this until the NextToken response element comes back as null .
QueryErrors (list) --
A list of QueryError objects. Each error contains an ErrorCode and Message . Possible values for ErrorCode are CLOUDFORMATION_STACK_INACTIVE , CLOUDFORMATION_STACK_NOT_EXISTING , CLOUDFORMATION_STACK_UNASSUMABLE_ROLE and RESOURCE_TYPE_NOT_SUPPORTED .
(dict) --
A two-part error structure that can occur in ListGroupResources or SearchResources .
ErrorCode (string) --
Specifies the error code that was raised.
Message (string) --
A message that explains the ErrorCode .
{'QueryErrors': {'ErrorCode': {'RESOURCE_TYPE_NOT_SUPPORTED'}}}
Returns a list of Amazon Web Services resource identifiers that matches the specified query. The query uses the same format as a resource query in a CreateGroup or UpdateGroupQuery operation.
Minimum permissions
To run this command, you must have the following permissions:
resource-groups:SearchResources
cloudformation:DescribeStacks
cloudformation:ListStackResources
tag:GetResources
See also: AWS API Documentation
Request Syntax
client.search_resources(
ResourceQuery={
'Type': 'TAG_FILTERS_1_0'|'CLOUDFORMATION_STACK_1_0',
'Query': 'string'
},
MaxResults=123,
NextToken='string'
)
dict
[REQUIRED]
The search query, using the same formats that are supported for resource group definition. For more information, see CreateGroup.
Type (string) -- [REQUIRED]
The type of the query to perform. This can have one of two values:
CLOUDFORMATION_STACK_1_0: Specifies that you want the group to contain the members of an CloudFormation stack. The Query contains a StackIdentifier element with an ARN for a CloudFormation stack.
TAG_FILTERS_1_0: Specifies that you want the group to include resource that have tags that match the query.
Query (string) -- [REQUIRED]
The query that defines a group or a search. The contents depends on the value of the Type element.
ResourceTypeFilters – Applies to all ResourceQuery objects of either Type . This element contains one of the following two items:
The value AWS::AllSupported . This causes the ResourceQuery to match resources of any resource type that also match the query.
A list (a JSON array) of resource type identifiers that limit the query to only resources of the specified types. For the complete list of resource types that you can use in the array value for ResourceTypeFilters , see Resources you can use with Resource Groups and Tag Editor in the Resource Groups User Guide .
Example: "ResourceTypeFilters": ["AWS::AllSupported"] or "ResourceTypeFilters": ["AWS::EC2::Instance", "AWS::S3::Bucket"]
TagFilters – applicable only if Type = TAG_FILTERS_1_0 . The Query contains a JSON string that represents a collection of simple tag filters. The JSON string uses a syntax similar to the GetResources operation, but uses only the ResourceTypeFilters and TagFilters fields. If you specify more than one tag key, only resources that match all tag keys, and at least one value of each specified tag key, are returned in your query. If you specify more than one value for a tag key, a resource matches the filter if it has a tag key value that matches any of the specified values. For example, consider the following sample query for resources that have two tags, Stage and Version , with two values each: [{"Stage":["Test","Deploy"]},{"Version":["1","2"]}] The results of this resource query could include the following.
An Amazon EC2 instance that has the following two tags: {"Stage":"Deploy"} , and {"Version":"2"}
An S3 bucket that has the following two tags: {"Stage":"Test"} , and {"Version":"1"}
The resource query results would not include the following items in the results, however.
An Amazon EC2 instance that has only the following tag: {"Stage":"Deploy"} . The instance does not have all of the tag keys specified in the filter, so it is excluded from the results.
An RDS database that has the following two tags: {"Stage":"Archived"} and {"Version":"4"} The database has all of the tag keys, but none of those keys has an associated value that matches at least one of the specified values in the filter.
Example: "TagFilters": [ { "Key": "Stage", "Values": [ "Gamma", "Beta" ] }
StackIdentifier – applicable only if Type = CLOUDFORMATION_STACK_1_0 . The value of this parameter is the Amazon Resource Name (ARN) of the CloudFormation stack whose resources you want included in the group.
integer
The total number of results that you want included on each page of the response. If you do not include this parameter, it defaults to a value that is specific to the operation. If additional items exist beyond the maximum you specify, the NextToken response element is present and has a value (is not null). Include that value as the NextToken request parameter in the next call to the operation to get the next part of the results. Note that the service might return fewer results than the maximum even when there are more results available. You should check NextToken after every operation to ensure that you receive all of the results.
string
The parameter for receiving additional results if you receive a NextToken response in a previous request. A NextToken response indicates that more output is available. Set this parameter to the value provided by a previous call's NextToken response to indicate where the output should continue from.
dict
Response Syntax
{
'ResourceIdentifiers': [
{
'ResourceArn': 'string',
'ResourceType': 'string'
},
],
'NextToken': 'string',
'QueryErrors': [
{
'ErrorCode': 'CLOUDFORMATION_STACK_INACTIVE'|'CLOUDFORMATION_STACK_NOT_EXISTING'|'CLOUDFORMATION_STACK_UNASSUMABLE_ROLE'|'RESOURCE_TYPE_NOT_SUPPORTED',
'Message': 'string'
},
]
}
Response Structure
(dict) --
ResourceIdentifiers (list) --
The ARNs and resource types of resources that are members of the group that you specified.
(dict) --
A structure that contains the ARN of a resource and its resource type.
ResourceArn (string) --
The ARN of a resource.
ResourceType (string) --
The resource type of a resource, such as AWS::EC2::Instance .
NextToken (string) --
If present, indicates that more output is available than is included in the current response. Use this value in the NextToken request parameter in a subsequent call to the operation to get the next part of the output. You should repeat this until the NextToken response element comes back as null .
QueryErrors (list) --
A list of QueryError objects. Each error contains an ErrorCode and Message .
Possible values for ErrorCode :
CLOUDFORMATION_STACK_INACTIVE
CLOUDFORMATION_STACK_NOT_EXISTING
CLOUDFORMATION_STACK_UNASSUMABLE_ROLE
(dict) --
A two-part error structure that can occur in ListGroupResources or SearchResources .
ErrorCode (string) --
Specifies the error code that was raised.
Message (string) --
A message that explains the ErrorCode .